NXP: OM13011 Evaluation Board for LPC122x Family (Keil MCB1227)

Oliver — Wed, 25 Jun 2014 00:53:07 GMT

Current Revision posted to Documents by Oliver on 6/25/2014 12:53:07 AM

Buy NowBuy Now

Development Tools

Kit Overview

The OM13011OM13011 is a 32-Bit ARM Cortex-M0 NXP LPC122xLPC122x Series evaluation Board [Keil MCB1227]. The OM13011 Evaluation Board enables you to create and test working programs based on the NXP LPC1200 family of ARM Cortex™-M0 processor-based devices.

The OM13011OM13011 board is populated with the NXP LPC1227FBD64/301LPC1227FBD64/301 Cortex-M0 device. The LPC122xLPC122x extend NXP's 32-bit ARM microcontroller continuum and target a wide range of industrial applications in the areas of factory and home automation. Benefitting from the ARM Cortex-M0 Thumb instruction set, the LPC122xLPC122x have up to 50 % higher code density compared to common 8/16-bit microcontroller performing typical tasks. The LPC122xLPC122x also feature an optimized ROM-based divide library for Cortex-M0, which offers several times the arithmetic performance of software-based libraries, as well as highly deterministic cycle time combined with reduced flash code size. The ARM Cortex-M0 efficiency also helps the LPC122xLPC122x achieve lower average power for similar applications.

The LPC122xLPC122x operate at CPU frequencies of up to 45 MHz.They offer a wide range of flash memory options, from 32 kB to 128 kB. The small 512-byte page erase of the flash memory brings multiple design benefits, such as finer EEPROM emulation, boot-load support from any serial interface and ease of in-field programming with reduced on-chip RAM buffer requirements.

The peripheral complement of the LPC122xLPC122x includes a 10-bit ADC, two comparators with output feedback loop, two UARTs, one SSP/SPI interface, one I2C-bus interface with Fast-mode Plus features, a Windowed Watchdog Timer, a DMA controller, a CRC engine, four general purpose timers, a 32-bit RTC, a 1 % internal oscillator for baud rate generation, and up to 55 General Purpose I/O (GPIO) pins.

Ordering information:

Part Number	Description
MCB1200MCB1200	MCB1200 Evaluation Board based on LPC1227FBD64
MCB1200UMCB1200U	MCB1200U Evaluation Board based on LPC1227FBD64 With ULINK2
MCB1200UMEMCB1200UME	MCB1200UME Evaluation Board based on LPC1227FBD64 With ULINKME

Key Applications: eMetering, Lighting, Industrial networking, Alarm systems, and White goods.

More Development Kits and Tools
	Other NXP Development Kits		NXP Overview
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More
IDE	Embest	CoIDE	ARM Cortex™-M	CooCox offer freely available powerful software development tool for ARM Cortex-M3 & Cortex-M0 based microcontrollers. Coocox Tools organizes and provides the knowledge required by developers. Learn More
RTOS	Embest	CoOS	ARM Cortex™-M	CoOS is a free and open RTOS from CooCox, designed specifically for Cortex-M processor, supports preemptive priority and round-robin, Semaphore, Mutex, Flag, Mailbox and Queue for communication & synchronization, highly scalable, minimum system kernel is only 974Bytes, supports interrupt while task switching, supports stack overflow detection, supports the platforms of ICCARM, ARMCC, GCC. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores
Debugger	Embest	ColinkExColinkEx	ARM Cortex™-M	ARM Cortex-M MCU JTAG Hardware Debugging Probe which supports in CooCox software and Keil Realview MDK

Technical Documents

Learning Center

Type	Description
User Guide	Keil: User Guide for MCB1200 Evaluation Board
User Manual	NXP: User manual for LPC1224/25/26/27
Product Brief	NXP: Product Brief for NXP 32 bit microcontrollers
Datasheet	NXP: Datasheet for LPC122x - 32-bit ARM Cortex-M0 microcontroller
Reference Manual	NXP: Reference Manual for Smart Appliance Application
Reference Manual	NXP: Reference Manual for Smart Grid Application
Application Note	NXP: AN11229 - Application Note for UUencoding for UART ISP
Revision Note	NXP: Errata sheet for LPC1224/25/26/27

Design Elements

Type	Description
Schematics	Keil: Schematics File for MCB1200 Evaluation Board
Application Library	NXP: Software code for LPC122x power modes
Application Library	NXP: Software Code for Using LPC122x ROM division routines
Application Library	NXP: Software Code for KNX evaluation board using LPC1227 and NCN5120

Video

www.youtube.com/watch

Kit Features

33MHz LPC1227FBD64/301LPC1227FBD64/301 device ARM Cortex-M0 processor-based MCU in 64-pin LQFP
On-Chip Memory: 128KB Flash and 8KB RAM
Serial Interface
- A standard DB9 connector provides an RS232 connection to the on-chip UART
Potentiometer for ADC Input
- An adjustable analog voltage source is on the MCB1200 board for testing the Analog to Digital output feature of the LPC1227.
Up to 55 GPIO
8 User LEDs + power
- The POWER LED indicates that +5VDC power is present on the board.
- The 8 Port LEDs marked 0 - 7 connect to port pins PIO2.0 - PIO2.7.
4 push-buttons (2 GPIO, ISP, & reset)
- The RESET push button resets the microcontroller.
- The PIO0_10 and PIO0_11 push buttons are for general purpose use.
Power via USB connector
Debug Interface Connectors
- 10-pin Cortex debug (0.05 inch connector)

Kit Contents

The MCB1200 Evaluation Board
A µVision IDE Quick Start Guide
An ARM Development Tools Overview
A USB A to USB B cable

Tags: lpc1227, mcb1200, om13011