ARM: MCB2929 Evaluation Board based on NXP LPC2929 MCU

sunnyzhuo1 — Fri, 04 Jan 2013 11:28:00 GMT

Current Revision posted to Documents by sunnyzhuo1 on 1/4/2013 11:28:00 AM

Buy NowBuy Now

Development Tools

Kit Overview

The Keil MCB2929MCB2929 Evaluation Board introduces the NXP LPC2900 family of ARM9 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB2929 has a wide range of interfaces making it a great starting point for your next ARM project.

The MCB2929MCB2929 Evaluation Board ships with the LPC2929LPC2929 device that is a superset of several other device variants of the LPC29xx microcontroller series. The MCB2929MCB2929 Board contains all the hardware components required in a single-chip LPC29xx system. The NXP LPC2929 is an ARM968E-S based high-performance 32-bit RISC Microcontroller with Thumb extensions, 768KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP), 56KB RAM (incl.ETB RAM), 32KB Instruction TCM and 32KB Data TCM, 16KB EEPROM, CPU clock up to 125 MHz, On-chip very low power ring oscillator (0.4MHz), On-chip crystal oscillator, On-chip PLL. Dual-master 6-channel GPDMA, External Static Memory Controller (SMC), 2 CAN 2.0B controllers, LIN 2.0 master controllers, 2 UART, 3 Q-SPI, 2 I2C, Two 10-bit 8-channel ADC (3.3V), One 10-bit 8-channel ADC(5V), 4 32-bit Timer, Four 6-channel PWMs, Two 32-bit dedicated Timer for PWM and ADC, Quadrature Encoder Interface(QEI), 32-bit Watchdog, Vectored Interrupt Controller (VIC) with 16 priority levels, up to 21 level-sensitive external interrupt pins, up to 104 GPIO pins, Flexible Reset Generator Unit (RGU), Flexible Clock-Generation Unit (CGU), Power Management Unit (PMU).

The MCB2929MCB2929 Evaluation Board also includes a 320x240 TFT LCD QVGA color display module with a built-in touchscreen. The MCB2929 Evaluation Board and Starter Kit include the MDK-ARM Evaluation Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB2929 and a Quickstart guide are included.

Ordering information:

Part Number	Description
MCB2929MCB2929	MCB2929 evaluation board based on LPC2929 MCU
MCB2929UMEMCB2929UME	CB2929 evaluation board with ULINK-ME USB-JTAG adapter

Key Applications: Industrial drives, Pumps, HVAC systems, Vending and cash machines, Motor control.

More Development Kits and Tools
	Other NXP Development Kits		NXP Overview
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More
RTOS	Segger	embOS	ARM Cortex™-M / Cortex™-A / ARM7™ / ARM9™	embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. It is a zero interrupt latency, high-performance RTOS that has been optimized for minimum memory consumption in both RAM and ROM, as well as high speed and versatility. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex™-A / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex™-A / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores

Technical Documents

Learning Center

Type	Description
User Guide	ARM: MCB2929 Quick Start Guide
User Guide	ARM: MCB2929 User's Guide
User Manual	NXP: LPC29xx User manual
Datasheet	NXP: LPC2926_27_29 Datasheet
Application Note	NXP: AN10809 - LPC29xx flash features
Application Note	NXP: AN10778 - PCB layout guidelines for NXP MCUs in BGA packages
Application Note	NXP: AN10809 - LPC29xx Power-down Mode Explained
Application Note	NXP: AN10899 - LPC2900 FOC
Revision Note	NXP: Errata sheet of LPC2929

Design Elements

Type	Description
Schematics	ARM: MCB2929 Evaluation Board Schematics

Video

Kit Features

125MHz LPC2929LPC2929 ARM968E-S processor-based MCU in 144-pin LQFP
On-Chip Memory: 768KB Flash, 56KB RAM, & 16KB EEPROM
External Memory: 1MB SRAM
Color QVGA TFT LCD with touchscreen
USB 2.0 Full Speed - USB, USB-OTG, & USB Host
2 CAN Interfaces
Serial Ports
MicroSD Card Interface
5-position Joystick and push-button
Analog Voltage Control (2) for ADC Input
104 GPIO pins
20 pin JTAG (0.1 inch connector)

Kit Contents

The MCB2929MCB2929 Evaluation Board
A µVision IDE Quick Start Guide
Example Programs for the MCB2929 Evaluation Board
- All examples can be compiled and debugged using the Lite Edition

Tags: mcb2929, lpc2929, nxp, arm, lpc2926, lpc2927