Texas Instruments: TMP006EVM Evaluation Module for the TMP006 Infrared Thermopile Sensor

atomar — Wed, 25 Jun 2014 00:53:05 GMT

Current Revision posted to Documents by atomar on 6/25/2014 12:53:05 AM

BUY NOWBUY NOW

The Texas Instruments TMP006EVMTMP006EVM is a simple EVM designed to allow full evaluation of the TMP006AIYZFTTMP006AIYZFT device. The EVM features the TMP006TMP006 device with the required specific PCB layout and some simple support circuitry. The GUI for the EVM implements the full object temperature calculations allowing the user to measure object temperatures with the TMP006EVM.

The TMP006TMP006 is an infrared thermopile sensor with digital output integrated circuit. This device measures the temperature of an object without making contact, making it ideal for many types of applications. The TMP006EVMTMP006EVMis a platform for evaluating the performance of the TMP006AIYZFTTMP006AIYZFT under various conditions.

The TMP006EVMTMP006EVM consists of two PCBs:

One board, the SM-USB-DIG, communicates with the user’s computer, provides power, and sends and receives appropriate digital signals to communicate with the TMP006TMP006.
The second PCB, the TMP006AIYZFTTMP006AIYZFT_Test_Board, contains the TMP006 as well as support and configuration circuitry.

TMP006EVMTMP006EVM Hardware Setup:

The PC runs graphical user interface (GUI) software that communicates with the SM-USB-DIG over a USB connection. The SM-USB-DIG translates the USB commands from the PC into power, I2C™, SPI™, and general-purpose input/output (GPIO) commands for the TMP006_Test_Board. The TMP006EVM does not require any additional components to operate.

Key Applications: Notebook Case Temperature, Comfort Index Measurement, Motor Case Temperature, Server Farm Power Management.

More Development Kits and Tools
	Texas Instruments Analog Development Kits		Texas Instruments Embedded Development Kits
	Development Platforms & Kits		element14 Knode

Technical Documents

Learning Center

Type	Description
User Guide	TI: User Guide for TMP006EVM and Software Tutorial
User Guide	TI: User Guide for TMP006
Selection Guide	TI: Selection Guide for TI Solutions for Tablets and eBooks
Datasheet	TI: Data Sheet for TMP006 - Infrared Thermopile Sensor in Chip-Scale Package
Reference Manual	TI: Reference Guide for TMP006 Layout and Assembly Guidelines

Design Elements

Type	Description
Application Library	TI: Software code for TMP006EVM (Rev. B)
Simulation Model	TI: TMP006 IBIS Model
CAD Model	TI: Footprints for TMP006AIYZFR
CAD Model	TI: Footprints for TMP006AIYZFT

Video

www.youtube.com/watch

Kit Features

Key Features for the TMP006EVMTMP006EVM Evaluation module are as below:

TMP006AIYZFTTMP006AIYZFT specific PCB layout
TMP006AIYZFTTMP006AIYZFT object temperature calculations
All required support circuitry
Extension cable for insertion into user's systems

Key features for TMP006TMP006 Infrared Thermopile Sensor:

Complete Solution in 1.6-mm × 1.6-mm Wafer Chip-Scale Package (WCSP) Device (DSBGA)
Digital Output:
- Sensor Voltage: 7 μV/°C
- Local Temperature: –40°C to +125°C
SMBus-Compatible Interface
Pin-Programable Interface Addressing
Low Supply Current: 240 μA
Low Minimum Supply Voltage: 2.2 V

Kit Contents

The Texas Instruments TMP006EVMTMP006EVM TMP006AIYZFTTMP006AIYZFT Evaluation Module is supplied with below contents:

TMP006EVM test board
SM-USB-DIG platform controller
USB Extension Cable
Ribbon type extension cable
Software CDROM

Tags: tmp006evm, tmp006, texas_instruments