Analog Devices: EVAL-CED1Z Converter Evaluation and Development (CED) Board

atomar — Thu, 28 Mar 2013 10:00:42 GMT

Current Revision posted to Documents by atomar on 3/28/2013 10:00:42 AM

BUY NOWBUY NOW

Kit Overview

The Converter Evaluation and Development (CED) board (EVAL-CED1ZEVAL-CED1Z) is part of a next generation platform from Analog Devices Inc., intended for use in evaluation, demonstration and development of systems using Analog Devices precision converters. It provides the necessary communications between the converter and the PC, programming or controlling the device, transmitting or receiving data over a USB link.

The Converter Evaluation and Development board (EVAL-CED1ZEVAL-CED1Z) is intended to assist system designers evaluate and prototype systems utilizing precision converter components from Analog Devices. It provides a means to read and write data, control and program devices from a PC via a high-speed USB 2.0 connection.

Due to its design, the CED can handle interfacing to multiple devices simultaneously for users who may wish to prototype their system utilizing proven hardware components from Analog Devices. The reconfigurable FPGA-based architecture of the board allows the FPGA to be reprogrammed at any time via the USB connection. This allows the user to develop and run their own code to accomplish their desired task.

The reconfigurable FPGA-based architecture of the board allows the FPGA to be reprogrammed at any time via the USB connection. This allows the user to develop and run their own code to accomplish their desired task.

For developments that require a processor as well as an FPGA, the CED1 board provides the means to connect directly to a Blackfin EZ-Kit. Three 90-way connectors present on the board mate directly with the Blackfin Ez-Kit allowing the development of very powerful systems and demonstrations.

The CED board requires a single 7V, 15W supply which ships with the board. The user may also connect a bench-top supply providing it can source a minimum current of 2A.

Key Applications: Evaluating Precision Converters, Creation of demonstration systems, Prototyping of end-user systems

More Development Kits and Tools
	More Analog Devices Analog Development Kits		Analog Devices MCU based Development Kits
	Development Platforms & Kits		element14 Knode

Technical Documents

Learning Center

Type	Description
User Guide	ADI: User Guide for EVAL-CED1Z Converter Evaluation and Development (CED) Board

Video

Kit Features

Features of EVAL-CED1ZEVAL-CED1Z:

Interfaces to multiple serial and parallel precision converter
evaluation boards
Supports high-speed LVDS interface
32MB SDRAM
4MB SRAM
USB 2.0 connection to PC
User reprogrammable Altera Cyclone FPGA
Provides 8 separate power supplies
Connects directly to Blackfin Ez-Kit

Kit Contents

The Analog Devices EVAL-CED1ZEVAL-CED1Z CED Board supplied with below contents:

EVAL-CED1ZEVAL-CED1Z Converter Evaluation and Development CED Board
USB A to Mini-B cable
7 Volt 15W Power Supply

Tags: g_devices, eval-ced1z, analoblackfin, ced, blackfin