Texas Instruments: TUSB9261DEMO TUSB9261 Demonstration & Reference Design

atomar — Wed, 25 Jun 2014 00:53:03 GMT

Current Revision posted to Documents by atomar on 6/25/2014 12:53:03 AM

BUY NOWBUY NOW

Kit Overview

The Texas Instruments TUSB9261DEMOTUSB9261DEMO board is a free-standing reference design that acts as a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) device. The TUSB9261DEMOTUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardware reference design for connection to a SATA device such as a solid state drive, hard disk drive, DVD drive, or Blu-Ray drive. The included firmware is capable of supporting a single SATA drive and supports the following:

USB Attached SCSI (UAS)
USB Mass Storage Class (MSC) Bulk-Only Transport (BOT) including the 13 error cases.
USB Mass Storage Specification for Bootability
USB Device Class Definition for Human Interface Devices (HID) for firmware update and manufacturer-specific custom functionality
Serial ATA Advanced Host Controller Interface (AHCI)
General Purpose Input/Output (GPIO)
Pulse Width Modulation (PWM) for LED dimming control
Serial Peripheral Interface (SPI) for updating firmware and loading custom device descriptors
Serial Communications Interface (SCI) for debug output only

The board works with the LINUX, MAC, and Windows native Mass Storage Class Drivers.

The TUSB9261DEMOTUSB9261DEMO board as supplied is intended to operate as a USB bus-powered peripheral with solid-state-drives. In order to use the DEMO board with higher current devices such as hard drives or optical drives, an external power supply is required.

The TUSB9261 is an ARM cortex M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP) compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class bulk-only transport (BOT), and USB human interface device (HID) interfaces.

Key Applications: External HDD/SSD, External DVD, External CD, HDD-Based Portable Media Player

More Development Kits and Tools
	Texas Instruments Analog Development Kits		Texas Instruments Embedded Development Kits
	Development Platforms & Kits		element14 Knode

Technical Documents

Learning Center

Type	Description
User Guide	TI: User Guide for TUSB9261DEMO
User Guide	TI: TUSB926x SpeedBoost Monitor User's Guide
User Guide	TI: User Guide for TUSB9261 Flash Burner
Datasheet	TI: Data Sheet for TUSB9261 USB 3.0 TO SATA BRIDGE
Revision Note	TI: TUSB9261 Mass Storage Device Errata
Application Note	TI: Application Note for TUSB9261 Implementation

Design Elements

Type	Description
Simulation Model	TI: TUSB9261 IBIS Model
Application Library	TI: Software Code for TUSB926x Default Firmware, U1/U2 Disabled (Rev. G)
CAD Model	TI: CAD Model for TUSB9261 (BXL File Format)

Video

Video 1	Video 2	Video 3
www.youtube.com/watch	www.youtube.com/watch	www.youtube.com/watch

Kit Features

Key Features for TUSB9261DEMOTUSB9261DEMO Board:

A free-standing external storage reference design
Auto-detection of single SATA drive
USB Attached SCSI Protocol Class Support
Bulk Only Transport Class Support

Key Features for TUSB9261:

Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant - TID 340730020
  - Integrated Transceiver Supports SS/HS/FS Signaling
- Best in Class Adaptive Equalizer
  - Allows for Greater Jitter Tolerance in the Receiver
- USB Class Support
  - USB Attached SCSI Protocol (UASP)
  - USB Mass Storage Class Bulk-Only Transport (BOT)
  - Support for Error Conditions Per the 13 Cases (Defined in the BOT Specification)
  - USB Bootability Support
  - USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a TI Provided Application
SATA Interface
- Serial ATA Specification Revision 2.6
  - gen1i, gen1m, gen2i, and gen2m
- Support for Mass-Storage Devices Compatible With the ATA/ATAPI-8 Specification
Integrated ARM cortex M3 Core
- Customizable Application Code Loaded From EEPROM Via SPI Interface
- Two Additional SPI Port Chip Selects for Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
  - 2 GPIOs Have PWM Functionality for LED Blink Speed Control
- Serial Communications Interface for Debug (UART)
General Features
- Integrated Spread Spectrum Clock Generation Enables Operation from a Single Low Cost Crystal or Clock Oscillator
  - Supports 20, 25, 30 or 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and IEEE1149.6 Boundary Scan

Kit Contents

The Texas Instruments TUSB9261DEMOTUSB9261DEMO is supplied with below contents:

TUSB9261 Demo Board

Tags: cortex_m3, tusb9261, cortex-m3, texas_instruments, arm, tusb9261demo