NXP: OM13033 BlueBoard-LPC11U24 Evaluation Board

atomar — Wed, 25 Jun 2014 00:52:48 GMT

Current Revision posted to Documents by atomar on 6/25/2014 12:52:48 AM

Buy NowBuy Now

Development Tools

Kit Overview

BlueBoard is a cost effective prototyping solution. It is a ready-to-run development platform with code snippets to demonstrate applications for every feature supported on the board. The Blue Board offers ubiquitous interfaces making it the best board available for the offered price.

The NGX BLUEBOARD-LPC11U24 (OM13033OM13033) is based on ARM Cortex-M0 microcontroller from NXP. LPC11U24 offers 32-KB Flash memory, 4-KB on-chip EEPROM data memory, 50-MHz operation, I²C controller with data rate of up to 1 Mbit/s, USB 2.0 full-speed device controller, and wide range of peripherals.

BLUEBOARD-LPC11U24BLUEBOARD-LPC11U24 microcontroller is factory-programmed with a quick start demo program. The quick start program resides in the BLUEBOARD-LPC11U24 on-chip Flash memory and runs each time power is applied, unless the quick start has been replaced with a user program.

The LPC11U24LPC11U24, a NXP ARM CORTEX-M0 microcontroller is a USB 2.0 full-speed device controller, has 32KB of internal flash, 8+2 KB SRAM and 4KB EEPROM. The LPC11U24 operates at CPU frequencies of up to 50MHz. In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. The peripheral complement of the LPC11U24 includes, one Fast-mode Plus I²C-bus interface, one RS-485/EIA-485 USART with support for synchronous mode and smart card interface, two SSP interfaces, four general purpose counter/timers, a 10-bit ADC, and upto 40 general purpose I/O pins.

Key Applications: Consumer peripherals, Medical, Industrial control, Industrial control, USB audio devices

More Development Kits and Tools
	Other NXP Development Kits		NXP Overview
	Development Platforms & Kits		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores

Technical Documents

Learning Center

Type	Description
User Guide	NXP: User Guide for Blue Board LPC11U24/37
User Manual	NXP: User Manual for KEIL MDK ARM with ULINK2
User Manual	NXP: User Manual for LPC-Xpresso with NXP LPC-Link
User Manual	NXP: UM10462 - User Manual for LPC11Uxx
Datasheet	NXP: Datasheet for LPC11U2x - 32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USB device; USART
Revision Note	NXP: Errata sheet for LPC11U2x

Design Elements

Type	Description
Schematics	NXP: Schematic for LPC11U24
Application Library	NXP: Software Code for KEIL MDK ARM
Application Library	NXP: Software Code for LPC-Xpresso
Application Library	NXP: Software Code for IAR (Use version 6.40.2 and above)

Video

Video 1	Video 2
www.youtube.com/watch	www.youtube.com/watch

Kit Features

Key Features for OM13033OM13033 BlueBoard-LPC11U24 Evaluation Board are as below:

Dimensions: 110mm X 110mm
Two layer PCB (FR-4 material)
Power: DC 6.5V with power LED On-board linear regulators generate +3.3V/500mA and +5V/500mA from power supply USB connector (as alternate power source)
10 pin, 20 pin CORTEX debug connector for SWD (Serial Wire Debug)
ISP, Wakeup, External Interrupt and reset switch
12.0000 MHz crystal for MCU, 32Khz crystal for RTC
Extension headers for all microcontroller pins
RS232 connector, PS2 connector, Micro SD/MMC card connector, USB type-B mini connector with link-LED
64 x 128 graphical LCD with Backlight control
High accuracy external RTC connected on I2C bus
RTC battery holder
10K pot for ADC

Kit Contents

The NXP OM13033OM13033 BlueBoard-LPC11U24 Evaluation Board supplied with below contents:

BlueBoard-LPC11U24
USB Mini B-Type Cable

Tags: lpc11u24, blueboard, om13033, nxp