Analog Devices: ADIS16445/PCBZ Evaluation Board for ADIS16445 Inertial Sensor

atomar — Fri, 15 Mar 2013 09:27:14 GMT

Current Revision posted to Documents by atomar on 3/15/2013 9:27:14 AM

BUY NOWBUY NOW

Kit Overview

The ADIS16445/PCBZADIS16445/PCBZ is a breakout board which provides ADIS16445AMLZADIS16445AMLZ, flexible cable and interface PCB to simplify the process of developing a prototype connection with an existing embedded processor system. It is required for connecting the ADIS16445AMLZ directly to the EVAL-ADIS evaluation system as well. The ADIS16445AMLZ is a fully-calibrated, MEMS IMU, which provides a serial peripheral interface (SPI) for all digital communications. It provides a dual-row, 24-pin connector interface that minimizes board space but does not support standard ribbon cable connections.

The flexible cable and interface PCB provides access to the ADIS16445AMLZADIS16445AMLZ, using dual-row, 12-pin connectors, which supports standard ribbon cable systems and hand-soldering connection techniques. The flexible cable mates the ADIS16445AMLZ to any system that is currently using the ADIS1636x, ADIS16375ADIS16375, ADIS16385ADIS16385, ADIS1640x, or ADIS1648x IMU products, which use a 24-pin interface, rather than the 20-pin interface that the ADIS16445 uses. This combination of components enables quicker install-ation for prototype evaluation and algorithm development.

The ADIS16445ADIS16445 iSensor® device is a complete inertial system that includes a triaxial gyroscope and a triaxial accelerometer. Each sensor in the ADIS16445 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear accel-eration (gyroscope bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements.

Key Applications: Platform stabilization and control, Navigation, Robotics.

More Development Kits and Tools
	More Analog Devices Analog Development Kits		Analog Devices MCU based Development Kits
	Development Platforms & Kits		element14 Knode

Technical Documents

Learning Center

Type	Description
Datasheet	ADI: Datasheet for ADIS16445 Compact, Precision Six Degrees of Freedom Inertial Sensor Data Sheet (Rev 0)

Design Elements

Type	Description
Application Library	ADI: Application Library for IMU Evaluation Software for the EVAL-ADIS System (Version 1.9.0)
CAD Model	ADI: 3D CAD Model for ADIS16445

Video

Video1	Video2
www.youtube.com/watch	www.youtube.com/watch

Kit Features

Features of ADIS16445ADIS16445 Inertial Sensor:

Triaxial digital gyroscope with digital range scaling
- ±62°/sec, ±125°/sec, ±250°/sec settings
- Axis-to-axis alignment, <0.05°
Triaxial digital accelerometer, ±5 g minimum
Autonomous operation and data collection
- No external configuration commands required
- 175 ms start-up time
Factory calibrated sensitivity, bias, and axial alignment
- Calibration temperature range: −40°C to +70°C
SPI-compatible serial interface
Embedded temperature sensor
Programmable operation and control
- Automatic and manual bias correction controls
- Bartlett window FIR length, number of taps
- Digital I/O: data ready, alarm indicator, general-purpose
- Alarms for condition monitoring
- Enable external sample clock input up to 1.1 kHz
- Single command self test
Single-supply operation: 3.15 V to 3.45 V
2000 g shock survivability
Operating temperature range: −40°C to +85°C

Kit Contents

The Analog Devices ADIS16445/PCBZADIS16445/PCBZ supplied with below contents:

ADIS16445/PCBZADIS16445/PCBZ Breakout board
Flexible connector/cable
Interface PCB Module

Tags: adis16445amlz, adis1636x, adis1640x, adis16445, adis1648x, adis16385, adis16445/pcbz, adis16375, inertial_sensor, imems, evaluation_board, analog_devices, isensor