Analog Devices: ADIS16488/PCBZ Evaluation Board for ADIS16488 Inertial Sensor

atomar — Fri, 15 Mar 2013 09:27:44 GMT

Current Revision posted to Documents by atomar on 3/15/2013 9:27:44 AM

BUY NOWBUY NOW

Kit Overview

The ADIS16488/PCBZADIS16488/PCBZ is a breakout board which includes one ADIS16488AMLZADIS16488AMLZ, one interface printed circuit board (PCB) to simplify the process of "prototyping" during the early stages of system design and evaluation. The ADIS16488AMLZ is a fully-calibrated, tactical-grade MEMS IMU, which provides a serial peripheral interface (SPI) for all digital communications. It provides a dual-row, 24-pin connector interface that minimizes board space but does not support standard ribbon cable connections. The interface PCB provides access to the ADIS16488AMLZ, using a dual-row, 16-pin connector, which supports standard ribbon cable systems and hand-soldering connection techniques.

The interface PCB also provides two sets of mounting holes: one set of holes for attaching the ADIS16488AMLZADIS16488AMLZ to the interface PCB and another set of holes for mounting the interface board to the system’s frame. The first set of holes line up with the ADIS16488AMLZ's mounting holes and are pre-tapped for use with M2x0.4mm machine screws. The second set of holes are in each corner of the interface PCB and support M2.5 or 4-40 machine screws.

The ADIS16488ADIS16488 iSensor® MEMS IMU is a complete inertial system that includes a triaxis gyroscope, a triaxis accelerometer, triaxis magnetometer and pressure sensor. Each inertial sensor in the ADIS16488 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyroscope bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements.

Key Applications: Platform stabilization and control, Navigation, Personnel tracking, Instrument, Robotics

More Development Kits and Tools
	More Analog Devices Analog Development Kits		Analog Devices MCU based Development Kits
	Development Platforms & Kits		element14 Knode

Technical Documents

Learning Center

Type	Description
User Guide	ADI: User Guide (UG-287) for EVAL-ADIS iSensor Evaluation System
Datasheet	ADI: Datasheet for ADIS16488 Tactical Grade Ten Degrees of Freedom Inertial Sensor
Product Brief	ADI: Product Brief for ADIS16488 Tactical Grade Ten Degrees of Freedom Inertial Sensor Silicon Anomaly (Rev B)
Design Techniques	ADI: Design Techniques for INS Faceoff MEMS vs FOGs, InsideGNSS, July/Aug 2012

Design Elements

Type	Description
Application Library	ADI: Application Library for IMU Evaluation Software for the EVAL-ADIS System (Version 1.9.0)
CAD Model	ADI: 3D CAD Model for ADIS16488

Video

Video1	Video2
www.youtube.com/watch	www.youtube.com/watch

Kit Features

Features of ADIS16488ADIS16488 Inertial Sensor:

Triaxial, digital gyroscope, ±450°/sec dynamic range
- <±0.05° orthogonal alignment
- 6°/hr in-run bias stability
- 0.3°/√hr angular random walk
- 0.01% nonlinearity
Triaxial, digital accelerometer, ±18 g
Triaxial, delta angle and delta velocity outputs
Triaxial, digital magnetometer, ±2.5 gauss
Digital pressure sensor, 300 mbar to 1100 mbar
Fast start-up time, ~500 ms
Factory-calibrated sensitivity, bias, and axial alignment
- Calibration temperature range: −40°C to +70°C
SPI-compatible serial interface
Embedded temperature sensor
Programmable operation and control
- Automatic and manual bias correction controls
- 4 FIR filter banks, 120 configurable taps
- Digital I/O: data-ready alarm indicator, external clock
- Alarms for condition monitoring
- Power-down/sleep mode for power management
- Optional external sample clock input: up to 2.4 kHz
- Single-command self-test
Single-supply operation: 3.0 V to 3.6 V
2000 g shock survivability
Operating temperature range: −40°C to +85°C

Kit Contents

The Analog Devices ADIS16488/PCBZADIS16488/PCBZ supplied with below contents:

ADIS16488/PCBZADIS16488/PCBZ Breakout Board

Tags: adis16488, adis16488/pcbz, inertial_sensor, imems, evaluation_board, analog_devices, adis16488amlz, isensor