Analog Devices: AD6673-250EBZ Evaluation Board for AD6673 80MHz Bandwidth, Dual IF Receiver

atomar — Sun, 27 Oct 2013 05:49:46 GMT

Current Revision posted to Documents by atomar on 10/27/2013 5:49:46 AM

BUY NOWBUY NOW

Software Tools

Kit Overview

The AD6673-250EBZAD6673-250EBZ is the AD6673AD6673 evaluation board that can be used to evaluate Analog Devices high speed AD6673-250AD6673-250 ADC. The AD6673-250EBZAD6673-250EBZ board and companion HSC-ADC-EVALDZHSC-ADC-EVALDZ high-speed data capture card comprise a signal performance-optimized complete evaluation system for the AD6673AD6673. The captured data can be analyzed using a laptop computer and ADI’s free VisualAnalog™ software.

The AD6673AD6673 is an 11-bit, 250 MSPS, dual-channel intermediate frequency (IF) receiver specifically designed to support multi-antenna systems in telecommunication applications where high dynamic range performance, low power, and small size are desired.

The AD6673AD6673 consists of two high performance analog-to-digital converters (ADCs) and noise shaping requantizer (NSR) digital blocks. Each ADC consists of a multistage, differential pipelined architecture with integrated output error correction logic, and each ADC features a wide bandwidth switched capacitor sampling network within the first stage of the differential pipeline. An integrated voltage reference eases design considerations. A duty cycle stabilizer (DCS) compensates for variations in the ADC clock duty cycle, allowing the converters to maintain excellent performance.

Key Applications: Diversity radio systems, Multimode digital receivers (3G) TD-SCDMA, WiMax, WCDMA, CDMA2000, GSM, EDGE, LTE, DOCSIS 3.0 CMTS upstream receive paths,HFC digital reverse path receivers, I/Q demodulation systems, Smart antenna systems, Electronic test and measurement equipment, RADAR receivers, COMSEC radio architectures, IED detection/jamming systems, General-purpose software radios, Broadband data applications.

More Development Kits and Tools
	More Analog Devices Analog Development Kits		Analog Devices MCU based Development Kits
	Development Platforms & Kits		element14 Knode

Software Tools

VisualAnalog™ Converter Evaluation Tool

VisualAnalog is a new way to test and characterize data converters, ADCs, and DACs alike. It provides the ability to customize the tests in a nearly limitless manner using a simple graphical user interface. VisualAnalog interfaces seamlessly with the DAC pattern generator (DPG) for DAC evaluation and the following ADC data capture boards for ADC evaluation:

HSC-ADC-EVALA
HSC-ADC-EVALB
HSC-ADC-EVALCHSC-ADC-EVALC
HSC-ADC-EVALDZHSC-ADC-EVALDZ

SPIController - High Speed ADC SPI Control Software

The high speed ADC SPI program allows the user to control advanced features on high speed, analog-to-digital converters (ADC) with SPI capability. This advanced controller program is used in conjunction with the high speed data capture boards and and specific device evaluation boards to manipulate and control SPI-accessible features. The SPI Controller program can run as a standalone application on a Windows platform, or in conjunction with any available data analysis tool, such as VisualAnalog™ or ADC Analyzer™.

The software includes advanced features to ensure a smooth transition from evaluation into prototyping and production. When a desired configuration is attained, the program includes a C-code generator that provides compatible C source code that can be incorporated into customer-developed software. For users without an available microcontroller, the software also includes an assembly code generator that produces code targeted for the ultralow cost PIC12F629 microcontroller.

Technical Documents

Learning Center

Type	Description
User Guide	ADI: User Guide (UG-493) for Testing the AD9250/AD6673 ADC Evaluation Boards Using the HSC-ADC-EVALDZ FPGA-Based Capture Board
User Guide	ADI: Quick Start Guide for AD6673 Evaluation Board
Datasheet	ADI: Datasheet for AD6673 80 MHz Bandwidth, Dual IF Receiver (Rev A)
Application Note	ADI: Application Note (AN-835) for Understanding ADC Testing and Evaluation
Application Note	ADI: Application Note (AN-877) for Interfacing to High Speed ADCs via SPI

Design Elements

Type	Description
Schematics	ADI: Schematics for AD9250/AD6673 Evaluation Board
Layout	ADI: Layout File for AD9250/AD6673 Evaluation Board
Simulation Model	ADI: IBIS Model for AD6673
Reference Design	ADI: Reference Design for AD6673 Evaluation Board, ADC-FMC Interposer and Xilinx KC705

Video

Video1	Video2	Video3
www.youtube.com/watch	www.youtube.com/watch	www.youtube.com/watch

Video1

Video2

Video3

www.youtube.com/watch

Kit Features

Features of AD6673-250EBZAD6673-250EBZ AD6673AD6673 Evaluation Board:

Full featured evaluation board for the AD6673AD6673
SPI interface for setup and control
Balun/transformer or amplifier input drive option
On-board LDO regulator needing a single external 6V, 2A dc supply
VisualAnalog® and SPI controller software interfaces

Features of AD6673AD6673 80MHz Bandwidth, Dual IF Receiver:

JESD204B Subclass 0 or Subclass 1 coded serial digital outputs
Signal-to-noise ratio (SNR) = 71.9 dBFS at 185 MHz AIN and 250 MSPS with NSR set to 33%
Spurious-free dynamic range (SFDR) = 88 dBc at 185 MHz AIN and 250 MSPS
Total power consumption: 707 mW at 250 MSPS
1.8 V supply voltages
Integer 1-to-8 input clock divider
Sample rates of up to 250 MSPS
IF sampling frequencies of up to 400 MHz
Internal analog-to-digital converter (ADC) voltage reference
Flexible analog input range
- 1.4 V p-p to 2.0 V p-p (1.75 V p-p nominal)
ADC clock duty cycle stabilizer (DCS)
95 dB channel isolation/crosstalk
Serial port control
Energy saving power-down modes
User-configurable, built-in self-test (BIST) capability

Kit Contents

The Analog Devices AD6673-250EBZAD6673-250EBZ supplied with below contents:

AD6673-250EBZAD6673-250EBZ Evaluation Board

Tags: _board, ad6673, ad6673-250ebz, ad6673-250, evaluation, hsc-adc-evaldz, analog_devices