Analog Devices: EVAL-ADF7XXXMB3Z Evaluation Board for ADF7023 ISM Band Transceiver

atomar — Wed, 03 Apr 2013 09:20:00 GMT

Current Revision posted to Documents by atomar on 4/3/2013 9:20:00 AM

BUY NOWBUY NOW

Kit Overview

The Analog Devices ADF7023ADF7023 is a very low power, high performance, highly integrated 2FSK/GFSK/OOK/MSK/GMSK transceiver designed for operation in the 862 MHz to 928 MHz and 431 MHz to 464 MHz frequency bands, which cover the worldwide license-free ISM bands at 433 MHz, 868 MHz and 915 MHz.

It is suitable for circuit applications that operate under the European ETSI EN300-220, the North American FCC (Part 15), the Chinese short-range wireless regulatory standards, or other similar regional standards. Data rates from 1 kbps to 300 kbps are supported.

The Evaluation platform consists of the EVAL-ADF7XXXMB3ZEVAL-ADF7XXXMB3Z mother board to which an appropriate daughter card may be connected. The motherboard may be powered via the USB cable supplied. The 5V from the USB cable is regulated down to 3.3V for the Cypress EZ USB IC, the ADuC7020ADuC7020 microcontroller and the ADF7023ADF7023 transceiver. Alternatively a battery may be used to power the microcontroller and transceiver.

The ADF7023ADF7023 evaluation platform consists of a 4-layer PCB daughter card which plugs into the EVAL-ADF7XXXMB3ZEVAL-ADF7XXXMB3Z motherboard.

Ordering Information:

MPN	Description
EVAL-ADF7XXXMB3ZEVAL-ADF7XXXMB3Z	Mother Board evaluation for the ADF7023 Daughter Boards
EVAL-ADF7023-JDB1ZEVAL-ADF7023-JDB1Z	Daughter Board (902 MHz - 958 MHz separate PA and LNA matches)
EVAL-ADF7023-JDB2ZEVAL-ADF7023-JDB2Z	Daughter Board (902 MHz - 958 MHz combined PA/LNA match)

Key Applications: Smart metering, IEEE 802.15.4g, Wireless MBUS, Home automation, Process and building control, Wireless sensor networks (WSNs), Wireless healthcare

More Development Kits and Tools
	More Analog Devices Analog Development Kits		Analog Devices MCU based Development Kits
	Development Platforms & Kits		element14 Knode

Technical Documents

Learning Center

Type	Description
Datasheet	ADI: Datasheet for ADF7023-J High Performance, Low Power, ISM Band FSK/GFSK/MSK/GMSK Transceiver IC (Rev B)
Product Brief	ADI: Product Brief for RF Transceivers for Short Range Devices
Design Techniques	ADI: Design Techniques for Wireless Technologies for Smart Meters, Focus on Water Metering
Selection Guide	ADI: Selection Guide for RF/IF IC
Application Note	ADI: Application Note (AN-1040) for RF Power Calibration Improves Performance of Wireless Transmitters

Design Elements

Type	Description
Layout	ADI: Layout File for ADF7023-J (Gerber Files)
Application Library	ADI: Application Library for ADF7023
CAD Model	ADI: CAD Model for ADF7023-JBCPZ (BXL File Format)

Video

Kit Features

Key features for ADF7023ADF7023 evaluation boards:

Frequency bands
- 862 MHz to 928 MHz
- 431 MHz to 464 MHz
Programmable datarates and modulation
- 1 kbps to 300 kbps
FSK/GFSK/OOK/MSK/GMSK modulation
very low power consumption
- 12.8 mA in PHY_RX mode (maximum front-end gain)
- 24.1 mA in PHY_TX mode (10dBm output, single-ended PA)
- 0.75 uA in PHY_SLEEP mode (32 kHz RC oscillator active)
- 1.28 uA in PHY_SLEEP mode (32 kHz XTAL oscillator active)
- 0.33 uA in PHY_SLEEP mode (Deep sleep mode 1)
High Sensitivity
Programmable output power
- -20dBm to +13.5dBm (single-ended PA)\
- -20 dBm to +10 dBm (differential PA)
Excellent receiver selectivity and blocker resilience

Kit Contents

The Analog Devices EVAL-ADF7XXXMB3ZEVAL-ADF7XXXMB3Z kit is supplied with below contents:

Evaluation Board
3.6 V Battery

The Analog Devices EVAL-ADF7023-JDB1ZEVAL-ADF7023-JDB1Z kit is supplied with below contents:

Daughter Board

The Analog Devices EVAL-ADF7023-JDB2ZEVAL-ADF7023-JDB2Z kit is supplied with below contents:

Daughter Board

Tags: adf7023, eval-adf7023-jdb2z, eval-adf7xxxmb3z, eval-adf7023-jdb1z, analog_devices