Cypress: CY8CKIT-001C PSoC Development Kit for PSoC 1, PSoC 3, or PSoC 5 Architectures

atomar — Tue, 11 Feb 2014 02:55:40 GMT

Current Revision posted to Documents by atomar on 2/11/2014 2:55:40 AM

BUY NOWBUY NOW

Development Tools

Overview

The CY8CKIT-001CY8CKIT-001 PSoC® Development Kit (DVK) provides a common development platform where you can prototype and evaluate different solutions using any one of the PSoC 1, PSoC 3, or PSoC 5LP architectures.

The PSoC DVK gives you a practical understanding of PSoC technology. In addition, the kit includes several example projects with step-by-step instructions to enable you to easily get started developing PSoC solutions. This kit includes PSoC 1, PSoC 3, and PSoC 5LP Family Processor Modules.

The CY8CKIT-001CY8CKIT-001 PSoC Development Board is designed to aid hardware, firmware, and software developers in building their own systems around Cypressfs PSoC devices. The flexibility to configure the power domains is one of the foremost features of this board. Input power to the board is from one of two sources:

12 V 1-A power supply adapter
9-V alkaline battery (not included)

Note: Do not apply more than 15 V as input voltage. Also, do not power the board from test points.

This full-featured board incorporates three onboard linear regulators that power peripherals and PSoC processor modules at voltages between 1.7 V and 5.0 V. These regulators include a fixed 5 V 1-A linear regulator, a fixed 3.3 V 300-mA linear regulator, and a 1.5 V to 3.3 V for 3.3-V supply and 1.5 V to 5 V for 5-V supply adjustable regulator. The board also provides the ability to separate the PSoC core VDD rail into two separate rails, analog and digital. In addition, the board is able to separate the I/O VDD rails, giving the flexibility to power the I/O ports at different voltages.

The board is equipped with a 2x16 alphanumeric LCD module capable of 1.8 V to 5.0 V I/O. In addition, there is a mini-B full-speed USB interface and a female DB9 serial communications interface. Also included is a 12-pin wireless radio module interface, which can be used to develop CyFi. low-power RF or other embedded RF solutions with this kit. The board also has a prototyping area containing a small breadboard, complete with I/O port sockets nearby, multipurpose LEDs, mechanical push buttons, and a multipurpose variable resistor. In addition, three capacitive sensing elements (two buttons and a five segment slider) are included on the board to allow the evaluation of CapSenseR applications.

The board has four general-purpose I/O (GPIO) expansion slots, allowing the I/O to expand to external boards. The board is protected against reverse voltage and overvoltage on the 5-V and 3.3-V lines on the expansion slots.

The board is designed with modularity in mind and, as a result, supports removable processor modules. This allows you to plug different PSoC processor modules into the board based upon the desired features of both 8-bit and 32-bit PSoC devices.

Key Applications: CapSenseR applications, low-power RF or other embedded RF solutions, consumer, industrial, and medical applications.

More Development Kits and Tools
	More Cypress Development Kits		Cypress Overview
	Knode Development Kits & Platform Room		Cypress PSoC Creator

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	Cypress	PSoC Designer	PSoC 1	PSoC Designer IDE accelerates system bring-up and time-to-market. Develop the applications using a library of pre-characterized analog and digital peripherals in a drag-and-drop design environment. Then, customize the design leveraging the dynamically generated API libraries of code. Finally, debug and test the designs with the integrated debug environment including in-circuit emulation and standard software debug features. PSoC Designer supports the entire library of PSoC 1 devices.
IDE	Cypress	PSoC Createor	PSoC 3 / PSoC 4 / PSoC 5 / PSoC 5LP	PSoC® Creator™ is a state-of-the-art software development IDE combined with a revolutionary graphical design editor to form a uniquely powerful hardware/software co-design environment. This co-design approach frees embedded designers from hardware re-spins and software hacks. It also enables immediate testing of new ideas, rapid response to hardware changes, and error-free software interaction with on-chip peripherals. Learn More
Programmer Software	Cypress	PSoC Programmer	All PSoC	The PSoC Programmer software tool supports all Cypress PSoC programming hardware and PSoC devices. PSoC Programmer is a simple GUI that connects to programming hardware to program and configure PSoC devices. From the GUI users will be able to select the target device, configure programming selections and execute a number of programming actions such as Program, Read, Verify and Erase. PSoC Programmer is a required installation for both PSoC Creator and PSoC Designer.
IDE	ARM	Keil C51	All 8051 Core	The Keil C51 development tools for the 8051 Microcontroller Architecture support every level of software developer from the professional applications engineer to the student just learning about embedded software development. Learn More
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications.Learn More
RTOS	Segger	embOS	ARM Cortex™-M	embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. It is a zero interrupt latency, high-performance RTOS that has been optimized for minimum memory consumption in both RAM and ROM, as well as high speed and versatility. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Emulator / Debugger	Cypress	CY3215-DKCY3215-DK	PSoC 1	PSoC 1 In-Circuit Emulation Development Kit
Emulator / Debugger / Programmer	Cypress	CY8CKIT-002CY8CKIT-002	PSoC 1 / PSoC 3 / PSoC 5	MiniProg3 Program and Debug Kit is an all-in-one programmer for PSoC 1, PSoC 3 and PSoC 5 architectures and debug tool for PSoC 3 and PSoC 5 architectures
Programmer	Cypress	CY3217CY3217	PSoC 1 (CY25/26xxx devices)	Miniprog1 programmer
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	All 8051 Core	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores

Technical Documents

Learning Center

Type	Description
User Guide	Cypress: User Guide for PSoC 1/PSoC 3/PSoC 5 Development kit (CY8CKIT-001)
User Guide	Cypress: Quick Start Guide for PSoC 1/PSoC 3/PSoC 5 Development kit (CY8CKIT-001)
Reference Manual	Cypress: Technical Reference Manual for CY8C28xxx PSoC Programmable System-on-Chip
Product Brief	Cypress: Release Notes on PSoC 1/PSoC 3/PSoC 5 Development kit (CY8CKIT-001)
Datasheet	Cypress: Datasheet for CY8C38 (PSoC 3) family
Datasheet	Cypress: Datasheet for CY8C55 PSoC 5 family
Application Note	Cypress: Application Note (AN54181) for Getting started with a PSoC 3 design project

Design Elements

Type	Description
BOM	Cypress: BOM on PSoC 1/PSoC 3/PSoC 5 Board (CY8CKIT-001) Design Files
Layout	Cypress: Layout on PSoC 1/PSoC 3/PSoC 5 Board (CY8CKIT-001) Design Files
Schematics	Cypress: Schematic on PSoC 1/PSoC 3/PSoC 5 Board (CY8CKIT-001) Design Files
Application Library	Cypress: Application Library for CY8CKIT-001 PSoC 3 Kit
Application Library	Cypress: Sample Code for PSoC 1/PSoC 3/PSoC 5/PSoC 5LP

Video

Video 1	Video 2
www.youtube.com/watch	www.youtube.com/watch

Video 1

Video 2

www.youtube.com/watch

Kit Features

Key Features for CY8CKIT-001C PSoC Development Kit:

Three onboard linear regulators that power peripherals and PSoC processor modules at voltages between 1.7 V and 5.0 V
The ability to separate the PSoC core VDD rail into two separate rails, analog and digital.
The board is able to separate the I/O VDD rails, giving the flexibility to power the I/O ports at different voltages.
The board is equipped with a 2x16 alphanumeric LCD module capable of 1.8 V to 5.0 V I/O.
A mini-B full-speed USB interface and a female DB9 serial communications interface.
12-pin wireless radio module interface
The board also has a prototyping area
- small breadboard, complete with I/O port sockets nearby, multipurpose LEDs, mechanical push buttons, and a multipurpose variable resistor.
Three capacitive sensing elements (two buttons and a five segment slider)
The board has four general-purpose I/O (GPIO) expansion slots
Protected against reverse voltage and overvoltage on the 5-V and 3.3-V lines on the expansion slots.
Supports removable processor modules.
Allows you to plug different PSoC processor modules into the board based upon the desired features of both 8-bit and 32-bit PSoC devices.

Key Features for PSoC 5 - CY8C55 Family:

32-bit ARM Cortex-M3 CPU core
Low voltage, ultra low power
Versatile I/O system
Digital peripherals
Analog peripherals (2.7 V ≤ VDDA ≤ 5.5 V)
Programming, debug, and trace
Precision, programmable clocking

Key Features for PSoC 3 - CY8C38 Family:

Single cycle 8051 CPU
Low voltage, ultra low-power
Versatile I/O system
Digital peripherals
Analog peripherals (1.71 V ≤ V_DDA ≤ 5.5 V)
Programming, debug, and trace
Precision, programmable clocking

Kit Contents

The Cypress CY8CKIT-001CY8CKIT-001 PSoC Development Kit is supplied with below contents:

PSoC Development Board
PSoC 1 CY8C28 Family Processor Module
PSoC 3 CY8C38 Family Processor Module
PSoC 5 CY8C58LP Family Processor Module
MiniProg3 Program/Debug Device
Program/Debug Ribbon Cable
USB Cable
12V AC Power Adapter
Quick Start Guide
Kit CDs, which includes: PSoC Creator™, PSoC Designer™, PSoC Programmer, Projects, and Documentation.

Tags: psoc3, psoc_3, psoc_5, posc5, psoc1, cy8ckit-001c, cypress, psoc_1, psoc