Analog Devices: EVAL-SDP-CS1Z System Demonstration Platform Controller Board

atomar — Wed, 03 Apr 2013 09:44:02 GMT

Current Revision posted to Documents by atomar on 4/3/2013 9:44:02 AM

BUY NOWBUY NOW

Development Tools

Kit Overview

The SDP-S is a controller board in the System Demonstration Platform(EVAL-SDP-CS1ZEVAL-SDP-CS1Z). The SDP-S is based on a USB to Serial Engine providing connectivity to the PC through a USB 2.0 hight speed port. Controller boards allow for the configuration and capture of data on daughter boards from the PC via USB. The SDP-S has a 120 pin connector which exposes serial interface peripherals to attached SDP compatible daughter boards. The SDP-S has configurable SPI, I2C and GPIOs communication lines. The PC side software application controlling the attached daughter board is provided with each of the daughter product evaluation boards or Circuits from the Lab™ reference circuits.

The SDP-S provides a subset of the capabilities of the SDP-B. The connector pin out used for the SDP-S is the same as the SDP-B but with the unsupported peripherals pins unavailable on the connector. The power and grounding pins are also identical.

The System Demonstration Platform is a collection of controller boards, interposer boards and daughter boards, used for easy, low cost evaluation of ADI components and reference circuits. SDP controller boards provide a means of communicating with the system under evaluation from the PC. Interposer boards route signals between two connectors. Daughter boards are a collection of product evaluation boards and Circuits from the Lab™ reference circuit boards. The SDP-S is used as part of the evaluation system for many Analog Devices components and reference circuits.

Key Applications: Communication & Networking

More Development Kits and Tools
	More Analog Devices Analog Development Kits		Analog Devices MCU based Development Kits
	Development Platforms & Kits		element14 Knode

Development Tools

The SDP controller boards were designed to be used in conjunction with other ADI component evaluation boards. Software for the SDP-S is on an evaluation board specific basis.

System Requirements

Windows XP SP2, Windows Vista™ or Windows 7 Business/ Enterprise/ Ultimate editions
Intel Pentium® processor (x86 compatible), 1 GHz or faster
512 MB RAM and 2 GB available hard disk space
NET 3.5 Framework
Application Software provided with CD

Technical Documents

Learning Center

Type	Description
User Guide	ADI: Quick Start Guide for SDP-S Controller Board and Evaluation Boards
User Guide	ADI: User Guide (UG-291) for SDP-S Controller Board
Product Brief	ADI: Product Brief for SDP Facilitates Quick Prototyping and Evaluation
Training Video	ADI: Training Video for System Demonstration Platform Simplifies Evaluation

Design Elements

Type	Description
Schematics	ADI: Schematics for SDP-S Board
BOM	ADI: Bill of Material (BOM) for SDP-S Controller Board

Video

www.youtube.com/watch

Kit Features

Features of EVAL-SDP-CS1ZEVAL-SDP-CS1Z System Demonstration Platform Controller Board:

It is a controller board in the System Demonstration Platform
Itis based on a USB to Serial Engine providing connectivity to the PC through a USB hight speed port
The SDP-S has a 120 pin connector which exposes serial interface peripherals to attached SDP compatible daughter boards
USB-to-serial engine
USB 2.0 PC connectivity
The SDP-S has configurable communication lines like
- SPI
- TWI/I2C
- GPIO
PC software stack and base firmware provided
The PC side software application controlling the attached daughter board is provided with each of the daughter product evaluation boards or Circuits from the Lab™ reference circuits.

Kit Contents

The Analog Devices EVAL-SDP-CS1ZEVAL-SDP-CS1Z supplied with below contents:

EVAL-SDP-CS1ZEVAL-SDP-CS1Z Controller Board
1 m USB Standard-A-to Mini-B-cable

Tags: eval-sdp-cs1z, sdp-s, controller_board, sdp-b, analog_devices