STMicroelectronics: STM32L152D-EVAL Evaluation board for STM32L1 series - with STM32L152ZD MCU

atomar — Fri, 22 Nov 2013 08:35:14 GMT

Current Revision posted to Documents by atomar on 11/22/2013 8:35:14 AM

BUY NOWBUY NOW

Development Tools

Overview

The STM32L152D-EVALSTM32L152D-EVAL evaluation board is a complete demonstration and development platform for the STM32 L1 series of ultra-low-power MCUs and includes an STM32L152ZDT6STM32L152ZDT6 ARM Cortex-M3 32-bit microcontroller with 384 KB of Flash memory. An ST-LINK/V2ST-LINK/V2 is integrated on the board as an embedded in-circuit debugger / programmer for the STM32L152ZDT6. The full range of hardware features on the board helps you develop your own applications and evaluate all peripherals (USB FS, USART, audio DAC, microphone ADC, dot-matrix LCD, LCD glass, IrDA, LDR, SRAM, NOR Flash, MicroSD Card, temperature sensor and so on). Extension headers facilitate easy connection of daughterboard or wrapping board for your application.

The ultra-low-power STM32L15xxD incorporates the connectivity power of the universal serial bus (USB) with the high-performance ARM Cortex-M3 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 384 Kbytes and RAM up to 48 Kbytes), a flexible static memory controller (FSMC) interface (for devices with packages of 100 pins and more) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The ultra-low-power STM32L15xxD operates from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. It is available in the -40 to +85 °C temperature range, extended to 105°C in low power dissipation state. A comprehensive set of power-saving modes allows the design of low-power applications.

Key Applications: Medical and handheld equipment, Application control and user interface, PC peripherals, gaming, GPS and sport equipment, Alarm systems, wired and wireless sensors, Video intercom, Utility metering

More Development Kits and Tools
	More STMicroelectronics Development Kits		STMicroelectronics Overview
	Knode Development Kits & Platform Room		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More
RTOS	Micrium	µC/OS-II	STM ARM MCU's	µC/OS-II, the Real-Time Kernel, is a portable, ROMable, scalable, preemptive, real-time deterministic multitasking kernel for microprocessors, microcontrollers and DSPs. Offering unprecedented ease-of-use, µC/OS-II is delivered with complete source code and in-depth documentation. Learn More
RTOS	Micrium	µC/OS-III	STM ARM MCU's	μC/OS-III is Micrium’s newest RTOS, designed for developers who need to save time on their current and next embedded sytem projects. Using a commercial real-time kernel such as μC/OS-III provides a solid foundation and framework to the design engineer dealing with the growing complexity of embedded designs. Learn More
RTOS	Segger	embOS	ARM Cortex™-M	embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. It is a zero interrupt latency, high-performance RTOS that has been optimized for minimum memory consumption in both RAM and ROM, as well as high speed and versatility. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Debugger / Programmer	STMicroelectronics	ST-LINK/V2ST-LINK/V2	STM8 / STM32	ST-LINK/V2 In-circuit Debugger and Programmer for the STM8 and STM32 MCUs
Debugger / Programmer	STMicroelectronics	STX-RLINKSTX-RLINK	STM8 / ST7 / µPSD / STM32 / STR7 / STR9	STX-RLINK In-circuit Debugger and Programmer for a complete range of STMicroelectronics microcontrollers (STM8, ST7, µPSD, STM32, STR7 and STR9)
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores

Technical Documents

Learning Center

Type	Description
User Manual	STMicroelectronics: User Manual (UM1521) for STM32L152D-EVAL Evaluation Board
User Manual	STMicroelectronics: User Manual (UM1510) for STM32L152D-EVAL Demonstration Firmware
Product Brief	STMicroelectronics: Product Brief (DB1558) for STM32L152D-EVAL Evaluation Board
Datasheet	STMicroelectronics: Datasheet for STM32L152ZD Ultra-low-power 32-bit MCU
Selection Guide	STMicroelectronics: Selection Guide for 8- and 32-bit microcontrollers
Application Note	STMicroelectronics: Application Note (AN3310) for Updating Firmware in STM32L1xx microcontrollers through in-application Programming Using the USART
Application Note	STMicroelectronics: Application Note (AN4023) on STM32 secure firmware upgrade (SFU) overview

Design Elements

Type	Description
Schematics	STMicroelectronics: Schematics file for STM32L152D-EVAL Evaluation Board
BOM	STMicroelectronics: BOM file for STM32L152D-EVAL Evaluation Board
Layout	STMicroelectronics: Gerber files for STM32L152D-EVAL Evaluation Board

Video

www.youtube.com/watch

Kit Features

STM32L152ZDT6STM32L152ZDT6 microcontroller
Four 5 V power supply options:Power jack ST-LINK/V2ST-LINK/V2 USB connectorUser USB connecto rDaughterboard
Audio jack connected to I2S DAC or STM32L152ZDT6 internal DAC
Microphone connected to ADC using integrated op amp as amplifier
2 GByte (or more) MicroSD Card on SDIO
Temperature sensor and RF EEPROM on I2C compatible serial interface
RS-232 interface configurable for communication or Flash loader
IrDA transceiver
4 Kbit serial Flash, 512 K x 16-bit SRAM and 128 Mbit NOR Flash
240x320 TFT color LCD connected to FSMC interface of STM32L152ZDT6
Joystick with 4-direction control and selector
Reset and Tamper or key button
4 color user LEDs
3 LEDs for MCU power range indicator
MCU consumption measurement circuit
40x8 glass LCD segments connected to LCD driver of the STM32L152ZDT6
Extension connector for daughterboard or wrapping board
MCU voltage; 3.3 V or adjustable 1.65 V-3.6 V
USB FS connector
Touch slider
Light dependent resistor (LDR)
ADC/ DAC input signal connector
MCU integrated op amp configured as Sallen-Key 2nd order low pass filter
MCU integrated op amp configured as amplifier with adjustable gain
Potentiometer
JTAG and trace debug support
Embedded ST-LINK/V2

Kit Contents

The STMicroelectronics STM32L152D-EVALSTM32L152D-EVAL Evaluation board supplied with below contents:

Evaluation Board

Tags: st-link/v2, cortex-m3, stm32l152d-eval, stm32l1, stm32l152d, stm, stmicroelectronics, stm32l152zd, arm