STMicroelectronics: STM32L152-SK/IAR IAR starter kit for STM32 L1 series - with STM32L152VB MCU

atomar — Fri, 22 Nov 2013 08:35:04 GMT

Current Revision posted to Documents by atomar on 11/22/2013 8:35:04 AM

BUY NOWBUY NOW

Development Tools

Overview

The IAR KickStart Kit™ (STM32L152-SK/IARSTM32L152-SK/IAR) is a complete, cost-effective solution for starting application development and evaluating the STMicroelectronics STM32L EnergyLite ARM core-based microcontrollers. IAR KickStart Kit for STM32L contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications, right out of the box.

The ultra-low-power STM32L15xxx incorporates the connectivity power of the universal serial bus (USB) with the high-performance ARM Cortex^™-M3 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 16 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The STM32L15xxx devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. The STM32L15xxx devices offer up to 20 capacitive sensing channels to simply add touch sensing functionality to any application.

The integrated LCD controller has a built-in LCD voltage generator that allows you to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage. The ultra-low-power STM32L15xxx operates from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. It is available in the -40 to +85 °C temperature range, extended to 105°C in low power dissipation state. A comprehensive set of power-saving modes allows the design of low-power applications.

Key Applications: Medical and handheld equipment, Application control and user interface, PC peripherals, gaming, GPS and sport equipment, Alarm systems, Wired and wireless sensors, Video intercom, Utility metering.

More Development Kits and Tools
	More STMicroelectronics Development Kits		STMicroelectronics Overview
	Knode Development Kits & Platform Room		element14 Knode

Development Tools

Software Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
IDE	ARM	Keil MDK-ARM	ARM Cortex™-M / Cortex-R4 / ARM7™ / ARM9™	The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More
RTOS	Micrium	µC/OS-II	STM ARM MCU's	µC/OS-II, the Real-Time Kernel, is a portable, ROMable, scalable, preemptive, real-time deterministic multitasking kernel for microprocessors, microcontrollers and DSPs. Offering unprecedented ease-of-use, µC/OS-II is delivered with complete source code and in-depth documentation. Learn More
RTOS	Micrium	µC/OS-III	STM ARM MCU's	μC/OS-III is Micrium’s newest RTOS, designed for developers who need to save time on their current and next embedded sytem projects. Using a commercial real-time kernel such as μC/OS-III provides a solid foundation and framework to the design engineer dealing with the growing complexity of embedded designs. Learn More
RTOS	Segger	embOS	ARM Cortex™-M	embOS is a priority-controlled real time operating system, designed to be used as foundation for the development of embedded real-time applications. It is a zero interrupt latency, high-performance RTOS that has been optimized for minimum memory consumption in both RAM and ROM, as well as high speed and versatility. Learn More

Hardware Development Tools:

Tool Type	Supplier	MPN	Supported Family	Description
Debugger / Programmer	STMicroelectronics	ST-LINK/V2ST-LINK/V2	STM8 / STM32	ST-LINK/V2 In-circuit Debugger and Programmer for the STM8 and STM32 MCUs
Debugger / Programmer	STMicroelectronics	STX-RLINKSTX-RLINK	STM8 / ST7 / µPSD / STM32 / STR7 / STR9	STX-RLINK In-circuit Debugger and Programmer for a complete range of STMicroelectronics microcontrollers (STM8, ST7, µPSD, STM32, STR7 and STR9)
Emulator / Debugger / Programmer	ARM	ULINK2ULINK2	ARM Cortex™-M / ARM7™ / ARM9™	ULINK2 Debug Adapter
Emulator / Debugger / Programmer	ARM	ULINKProULINKPro	ARM Cortex™-M / ARM7™ / ARM9™	ULINKpro Debug and Trace Unit
Emulator	Segger	J-LinkJ-Link	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	JTAG/SWD Emulator with USB interface
Programmer	Segger	Flasher ARMFlasher ARM	ARM Cortex™-M / Cortex-R4 / Cortex-A / ARM7™ / ARM9™	Flash Programmer for ARM and Cortex cores

Technical Documents

Learning Center

Type	Description
User Guide	STMicroelectronics: User Guide for IAR™ starter kit for STM32L EnergyLite 32-bit microcontrollers
Datasheet	STMicroelectronics: Datasheet (DS6876) for STM32L15xx6/8/B Ultra-low-power 32-bit MCU
Product Brief	STMicroelectronics: Product Brief for STM32 32-bit MCUs ARM Cortex-M core
Tips And Tricks	STMicroelectronics: Technical note (TN0830) on How to use EWARM 6.2x with projects built with EWARM 6.1 and previous versions
Selection Guide	STMicroelectronics: Selection Guide for 8- and 32-bit microcontrollers
Application Note	STMicroelectronics: Application Note (AN3310) for Updating Firmware in STM32L1xx microcontrollers through in-application Programming Using the USART
Application Note	STMicroelectronics: Application Note (AN4023) on STM32 secure firmware upgrade (SFU) overview
Application Note	STMicroelectronics: Application Note (AN1015) on Software Techniques for Improving Microcontroller EMC Performance

Design Elements

Type	Description
Simulation Model	STMicroelectronics: STM32 Boundary Scan Description Language (BSDL) files

Video

www.youtube.com/watch

Kit Features

Full-featured KickStart™ development board with STM32L152VBSTM32L152VB MCU
Embedded J-Link in-circuit debugger/programmer with USB interface to host PC and 20-pin JTAG application interface
Small 19-pin trace tool connector
Graphic LCD display
USB connector
AN-TR wheel
Wake-up button
User button
Reset button
Power LED
User LEDs
4 power options: J-Link (JTAG pin 19), trace connector (pin 11and 13), USB or external power supply
PWM routed to LED
USART routed to DB9 connector
UEXT connector
Prototyping area
RoHS Regulation (Directive 2002/95/EC) compliant
The IAR Embedded WorkBench® for ARM (EWARM) software package with:
- KickStart™ C/C++ compiler for output of code up to 32 Kbytes
- VisualSTATE® code generator, 20-state version
- C-SPY® high-level language debugger
- Editor, linker and librarian tools

Kit Contents

The STMicroelectronics STM32L152-SK/IARSTM32L152-SK/IAR IAR starter kit supplied with below contents:

Evaluation board with STM32L152VBSTM32L152VB MCU
IAR Embedded Workbench for ARM 32K limited edition
IAR visualSTATE 20-state evaluation edition Embedded IAR J-Link Lite for ARM debug probe
Example applications made for the STM32L152VBSTM32L152VB board
RTOS board support from IAR Systems RTOS partners

Tags: stm32l152vb, kit™, stm32l15xxx, stm32, stm32l152-sk/iar, kickstart, stmicroelectronics, iar