Forum - Recent Threads

Ayuda para encontrar este cable plano

ileanoska — Tue, 04 Oct 2016 21:13:23 GMT

El cable es de un control élite de xbox one no sé el nombre ni sus especificaciones y quisiera saber si aún tengo oportunidad de encontrarlo antes de que tome la deci de comprar otro control mando las imágenes sería de mucha ayuda su información , como pueden ver un extremo no tiene la entrada la desgarre completamente

Need help with video wires!!! Please help!!!

e14 Contributor — Thu, 25 Feb 2016 22:23:26 GMT

Hello my name is Brenton. I recently have started a project to make my ps2 portable. I got a car backup screen for the screen for the portable. I have been trying to solder the screen to the board. Only one problem, I don't know what I'm doing. I have the video cable cut and I have soldered it many times to the correct spot i have found off a diagram. I just recently figured out I need ground. I have no idea which wire the video ground is. I doesn't even seem to exist. There are 2 video inputs, a white and a yellow. The only other wires are red and black, which are positive and negative for power. So my question is, which wire is ground? How do i find it? And will just soldering the yellow wire and the ground give video input? Thanks ahead of time. I appreciate your answer.

Insulated versus not insulated copper wire

e14 Contributor — Wed, 11 Mar 2015 00:05:05 GMT

I noticed someone used .0808 copper wire that is not insulated for a project, but I only have insulated, and the parts list does not make a distinction of which one to use...if I use the insulated wire, will that make a difference in the outcome of the project? Thank you!

An alternate processor for tms320f2812

e14 Contributor — Thu, 06 Feb 2014 16:37:56 GMT

Hello

I'm doing a PWM based project which requires the generation of 100 kHz reference wave and 400 kHz carrier wave.

I was told to use a DSP TMS320F2812 for this.

Due to the high price of the processor mentioned above, I'm looking for an alternative to fulfill my project requirement at a lesser price.

Can someone pls help me out?

Thanks in advance

Puissance/ampérage max dans un câble AWGxx ?

e14 Contributor — Wed, 23 Jan 2013 10:53:29 GMT

Bonjour,

Le contexte :

========

Pour une question d'optimisation du câblage, je voudrais utiliser des câbles multipaires pour transmettre des datas et/ou alimenter des équipements.

Par ex. je souhaiterais passer une trans RS485 et l'alim 12Vcc dans un câble AlphaWire 4 conducteurs AWG24 (réf : 5014C).

Comme seule caractéristique électrique, les docs techniques indiquent souvent la tension max. Par ex. 300 V dans le cas du 5014C (http://www.alphawire.com/en/Products/Cable/Xtra-Guard-Performance-Cable/Xtra-Guard-1/5014C).

En revanche je ne trouve rien sur le courant max. Peut-être que je cherche mal..!!

Ma question :

==========

Où trouver des infos fiables sur les courants max ou puissances max admissibles dans les câbles, disons, de 20 à 30 AWG ?

J'ai bien trouvé ce site qui donne un tableau http://www.powerstream.com/Wire_Size.htm mais je ne sais pas ce qu'il faut comprendre par "Max amps for chassis wiring" et " Max amps for power transmission" ?! car il y a un écart énorme entre les 2 valeurs...

Si je compile les 2 sources, la doc Alpha et le site indiqué ci-dessus, je pourrais aller jusqu'à 300 V sous 3,5 A = 1050 W dans un AWG 24...!?

Merci.

Bien cordialement,

gael06

Alpha Wire's product specifications

e14 Contributor — Fri, 06 Jan 2012 14:39:42 GMT

Some of Alpha Wire's specifications have two different maximum temperature values listed. Which one is right? Which one should I use?

Attachments:

community.element14.com/.../C45422V15.pdf

C45422V15.pdf

What is the difference between a two-conductor cable and a one-pair cable?

e14 Contributor — Mon, 12 Dec 2011 15:43:10 GMT

What is the difference between a two-conductor cable and a one-pair cable?

Does wire have an expiration date?

eokerblom — Wed, 02 Dec 2009 15:35:44 GMT

I was asked by a customer for the expiration date on a UL1015 hook up wire. Is there such a thing? The customer works at an aviation related company so perhaps there are special requirements involved.