Tech First Kit-Cypress-CY3267–PowerPSoC_Lighting-EVK

tech2 — Sun, 27 Oct 2013 02:22:29 GMT

Current Revision posted to Documents by tech2 on 10/27/2013 2:22:29 AM

Overview
Kit Contents
Key Features
Ordering Information
Documents

Overview

The CY3267.CY3267. PowerPSoC(tm) Lighting Evaluation Kit enables designers to evaluate Cypress' PowerPSoC family of devices and demonstrates their ability to create scalable LED management solutions. The PowerPSoC devices feature high performance power electronics including 1A, 2 MHz power FETs, hysteretic controllers, current sense amplifiers, and PrISM(tm)/PWM modulators to create a complete solution for LED power management. Right out of the box, the CY3267.CY3267. Kit can be used to evaluate PowerPSoC's ability to drive 4 LED channels (Red, Green, Blue and Amber) at the desired color and brightness output.

Kit Contents

The CY3267.CY3267. Kit consists of two hardware components:

CY3267.CY3267. PowerPSoC Main Board
- This board consists of the PowerPSoC™ CY8CLED04DOCD device, designed with a floating load buck topology to drive 1A to each of its four output channels. The input power supply can come from the wall-wart connector or the custom power supply screw terminals.
LED Daughter Board
- This board serves as a load to the Main Board. It consists of a 10W 4-channel RGBA LED integrated into a single package.
Wall-wart Power Supply
Optical Diffuser
Retractable USB Cable
Lighting Evaluation Kit CD
Kit Guide and Quick Start Guide (located at CD Drive:\Documents\)
Board Schematics, BOM, and Design Files (located at CD Drive:\Hardware\)
Intelligent Lighting Control GUI Setup (located at CD Drive:\Software\)
PowerPSoC default firmware source code (located at CD Drive:\Firmware\CY3267_PowerPSoC\)
Kit default firmware hex files (located at CD Drive:\Firmware\Hex Files\)
Quick Start Guide Booklet
PSoC Software Development Suite CD
PSoC Designer 5.0 Setup
PSoC Programmer 3.0

Key Features

The RDK-IDM ships with the software-customizable MDL-IDM-L35 module. The MDL-IDM-L35 features the following:

Out-of-box evaluation experience using the PowerPSoC Main Board, RGBA LED daughter card and Intelligent Lighting Control GUI, all included in the kit.
Kit default firmware demonstrates HB-LED control with intelligent color mixing using PowerPSoC.
PC USB connectivity through on-board USB controller
Screw terminals for flexible input voltage options (7V to 32V)
Debug capability provided by the PowerPSoC On Chip Debugger (OCD) device and RJ-45 jack that connects to CY3215DK ICE Cube Emulation Kit.
Interface to custom LED daughter boards through screw terminals from the PowerPSoC mother board
CY3271 FirstTouch RF Kit Connector
CyFi Radio Module Connector
Access to all Function I/O pins of PowerPSoC for additional design and debug capability.

While the Main Board provides connectors for CY3271 FirstTouch RF Kit and the CyFi Radio Module, these are not enabled in the kit default firmware. You can also develop firmware to add a DMX512 or DALI interface to PowerPSoC and use the 5-pin header J12 to connect to a suitable external interface circuit.

Ordering Information

Products

Supplier	Part Number
Cypress	CY3267CY3267

Associated Products

Supplier	Description	Part Number
Cypress	Power PSoC 4CH 1A	CY8CLED04D01-56LTXICY8CLED04D01-56LTXI

Document List

Data Sheet

Part Number	Description	Size
CY8CLED04DOCD	4 Channel Led driver IC	1.12MB

Application Notes

File Name	Size
CapSense™ Best Practices - AN2394	342KB
PCB Guidelines for PowerPSoC as a LED Driver - AN52209	387KB
PowerPSoC™ Firmware Design Guidelines - AN51012	609KB
Basic Thermal Guidelines for using PowerPSoC® - AN53781	395KB
Capacitance Sensing - Layout Guidelines for PSoC CapSense - AN2292	453KB

Hardware & Software

File Name	Size
CY3267 Kit documentation – include demo firmware, schematic, design file	4MB
PSoC Designer™ 5.0 Service Pack 5.5	243MB
PSoC Programmer 3.10 Beta 3	5.24MB

Tags: ap:lighting, sp:cypress, at:evaluation_kits, at:tech_first_kit