/products/manufacturers/infineon/b/blog/posts/infineon-dc-motor-driver-shield-reviewThe DC Motor Driver shield is Infineon &#39;s evaluation board for their very capable 1/2 H-Bridge driver IC BTN8982 .They have designed a nice and easy to use schematic in the Arduino form factor. That makes it easy to set up a test bed to evaluate t...en-USTelligent Community 12https://community.element14.com/products/manufacturers/infineon/b/blog/posts/infineon-dc-motor-driver-shield-reviewTue, 03 Mar 2015 13:30:13 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:64da46a1-c7d3-4738-984d-d0e814c4ba86gadget.iom1<p>Is it permissible for a &quot;compatible&quot; shield to have edges that overhang the host board?</p><p>If so, surely that would be a sensible place to locate components such as the capacitor and motor connections.</p><img src="https://community.element14.com/aggbug?PostID=19872&AppID=26&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/products/manufacturers/infineon/b/blog/posts/infineon-dc-motor-driver-shield-reviewSun, 08 Feb 2015 22:30:33 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:64da46a1-c7d3-4738-984d-d0e814c4ba86DAB2<p>Very good and honest review.</p><p>&nbsp;</p><p>I agree, it is a complete mystery how anyone designing a Arduino compatible board could make such simple mistakes in configuration.</p><p>&nbsp;</p><p>On the other hand, I could see that how the design would be good for a separate set of boards driving multiple motors with the use of cables between your driving processor and the motor boards.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=19872&AppID=26&AppType=Weblog&ContentType=0" width="1" height="1">