New ESD/EMI Protection Device for microSD Card Interface - BGF 117

ophilpott — Thu, 07 Oct 2021 08:32:44 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:44 AM

You'll find a microSD card in just about every portable device you can think of. This removable memory extension is about 4 times smaller than a standard SD card, which makes it the smallest removable Flash memory card on the market. Hence, the microSD card has made its way into applications ranging from digital still cameras and MP3 players through GPS navigation devices to mobile phones.

The microSD card interface is an expensive IC that requires protection. We have introduced a new device - the BGF 117 - that protects this interface from being destroyed by an electrostatic discharge (ESD) event and from malfunction caused by electromagnetic interference (EMI). The BGF 117 achieves this by combining high-level ESD protection devices with an EMI filter in one small device. It provides simultaneous protection for a total of 7 lines - 3 data lines, the data/direction control line, clock line, command line and voltage supply line.

The BGF 117solves numerous design challenges by:
a) reducing the system bill of materials, also cutting logistical and pick&place effort
b) minimizing the PCB area occupied by standard building blocks to leave more room for new and sophisticated applications
c) integrating high-level ESD protection to immunize the system against ESD strikes and enhance reliability
d) implementing EMI filters to prevent the system from interference from unwanted frequencies, which can adversely affect data transfer and data integrity
e) designing in compliance with regulations and specifications

Features

Applications

Environmentally friendly, fully green (RoHS and WEEE) device
7-line ESD/EMI protection combined in one device
High level ESD protection of +-15kV according IEC61000-4-2 contact discharge
Integrated pi-type EMI filter for effective reduction of interfering frequencies
Ultra-low line capacitance of only 8pF to retain signal integrity
Integrated pull-up and line termination resistors
Cost- and space-effective wafer level package (WLP) measuring 1.55x1.55mm²
Environmentally friendly, fully green (RoHS and WEEE) device

ESD/EMI protection for
- microSD card
- miniSD card
- SD card
- MMC card
Mobile phones
MM communication modules
Consumer electronic devices like DCS, VCR, MP3 players, GPSnavigation devices

Tags: sp:infineon, bgf117, microsd, emi, esd