Documents

Infineon releases ILD4035 switch-mode LED driver for 1W LEDs for general lighting applications

Former Member — Tue, 09 Nov 2021 16:55:23 GMT

Current Revision posted to Documents by Former Member on 11/9/2021 4:55:23 PM

ILD4035: Step-down LED driver with internal switch for 1W LEDs

December 2010 - Infineon Technologies introduces the first member of the new ILD4xxx family of switch-mode LED drivers for general lighting applications, the ILD4035.

The ILD4035 is a hysteretic step down LED Driver IC for general lighting applications. The internal switch is capable of driving a series of 1W LEDs with a 350mA typical output current. The ILD4035 offers a wide input voltage range (4.5V - 42V) and an adjustable output current via an external current sense resistor. With a multifunctional control pin, the IC can be switched on and off by an external signal that regulates the brightness of the LEDs by PWM or DC voltage dimming as well.

The voltage ripple can be set depending on the value of the switching inductor. The precise internal bandgap stabilizes the circuit and provides stable LED current over the operating temperature range. Furthermore, overvoltage and short circuit protection as well as the integrated reversible temperature shutdown mechanism help to protect the LED system.

Key features of the ILD4035:

Wide 4.5V to 42V input voltage range
Internal switch for driving 1W LEDs at 350mA
Over temperature protection
Overcurrent and overvoltage protection
Flexible dimming: PWM or analog voltage (DC)
Small SC-74 package: 2.5mm x 2mm x 1mm

Target applications of the ILD4035:

LED driver for general lighting applications
Indoor illumination, residential lighting
Outdoor illumination, street lighting
Office lighting, downlights
Architectural lighting

For an overview of the Infineon LED driver portfolio for general lighting applications please visit http://www.infineon.com/lowcostleddriver

Attachments:

community.element14.com/.../AN215_2D00_-Driving-1W-LEDs-with-ILD4035.pdf	AN215- Driving 1W LEDs with ILD4035.pdf
community.element14.com/.../ILD4035_5F00_Datasheet.pdf	ILD4035_Datasheet.pdf

Tags: led;, led, 1w_leds, Design Resources, leds;, lighting;, driver;, 1w_led;, led_lighting;

New High-Current PROFET™︎ - Low-Ohmic Protected High-Side Switch in 5-Pin DPAK

ophilpott — Thu, 07 Oct 2021 08:33:50 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:50 AM

We have further expanded our unrivalled portfolio in the low-ohmic arena with the introduction of BTS 50060-1TEA. This device is a 6mΩ (max 12mΩ @ 150°C) single-channel protected high-side switch, housed in a green and robust 5-pin DPAK package.

Targeted mainly at heating systems (e.g. seat and PTC heaters) and relay replacement, this new PROFET™ can also be used for all types of resistive, capacitive and inductive loads. Optimized edge shaping results in low switching losses and good EMC performance, offering the best balance between power and efficiency. BTS 50060-1TEA can be driven directly from a microcontroller and includes protection functions such as overcurrent and overtemperature shutdown plus diagnostic functions such as open load in ON and OFF state, short-to-battery detection, and accurate load current measurement. In addition, an innovative sense current concept enables simplified end-of-line calibration.

Features

Applications

6mΩ R_DS(on) (max 12Ω @ 150°C) with inrush current up to 60A
EMC optimized performance
3.3 and 5V compitable logic inputs
Advanced analog load current sense signal
Embedded protection features (e.g. overcurrent shutdown, overtemperature shutdown)
Embedded diagnostics features (e.g. open load in ON and OFF state), providing a defined fault signal
AEC-qualified green packages (RoHS-compliant)
Possibility of high current drive in a small package
Low effort for noise filtering
Direct connection to MCU
Easy current sense calibration
Protection of load and device
Easy failure detection by distinguishing different failure modes
Suitable for lead-free soldering in accordance with IPC/JEDEC J-STD-020

Glow plug drivers
Seat heating systems
Auxiliary PTC heaters
Centralized door locs
Relay + fuse replacement in junction boxes and power management modules
Resistive, inductive and capacitive loads

Tags: sp:infineon, profet, bts, 500601tea

New PROFET™︎+ Family - Benchmark Robustness and Diagnostics in Modular Packages

ophilpott — Thu, 07 Oct 2021 08:33:03 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:03 AM

Infineon now launches its next generation of discrete Smart High-Side switches - PROFET™+. The first devices are dual channel drivers ranging from 20mΩ up to 180mΩ R_DS(on)in PG-DSO14 exposed pad packages. The family is especially designed to drive light bulbs and LEDs in the harsh automotive environment.

The devices provide state-of-the-art diagnostics and protection features. Its high current sense accuracy is able to diagnose even smallest loads such as LEDs. The very high short circuit robustness across the whole family is benchmark in the market. Based on the identical footprint of its packages, maximum design flexibility is given to change loads and devices without major modification of the board layout.

The complete PROFET™+ family will consist of single and dual-channel devices ranging from 8mΩ up to 180mΩ R_DS(on) and will be rolled out in the next 2 years.

Features

Applications

N-channel MOSFET with charge pump
Voltage-dependent current limitation
Overtemperature protection with auto-restart
Very high robustness against repetitive short circuits (100k cycles)
Highly accurate proportional load current sense for diagnostic feedback on even the smallest loads (LEDs)
PWM capability up to 200Hz for bulb and 400Hz for LED
Very low stand-by current
Pin compatible in PG-DS014 and PG-DS08 exposed pad packages
RoHS & ELV compliant

12V grounded high-side loads up from 5A down to 0.5A (permanent/channel)
Qualified for automotive applications such as Lighting, Body Control Modules, Heating, Energy/Power Distribution
Various industrial applications
Capacitive loads like bulb lamps with high inrush currents or LEDs with low currents
Resistive loads like heating streamer
Inductive loads like electromagnetic valves
Replacement of electromechanical relays, fuses and discrete circuits

Tags: high_side, profet, switches, sp

TLE 8209-2SA - Latest Addition to the H-Bridge Powertrain Family

ophilpott — Thu, 07 Oct 2021 08:33:03 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:03 AM

With the introduction of the TLE 8209-2SA, we are addressing the growing need for H-bridges in powertrain applications.

TLE 8209-2SA is targeted specifically at electronic throttle control systems but is also suitable for other DC motor applications like exhaust gas recirculation systems, variable valve controls and turbochargers featuring variable geometries.

The new powertrain H-bridge comes in the well-established 430 mil power DS0-20 package. It contains all features required for safe operation even in harsh environmental conditions. These include Vdd monitoring for a safe switch-off path in case of Vdd loss or overvoltage and 18V-tolerant I/Os for an increased level of safety and robustness. During extreme thermal conditions, for junction temperatures above 165°C, the temperature-dependent current reduction feature reduces the current automatically for added safety and reliability.

The power MOSFETs of the output stages are optimized for low electromagnetic emission. Designers are also free to choose between two diferent slew rates. EMI measurements confirm that the TLE 8209-2SA shows outstanding EMC behaviour!

Features

Applications

Exellent EMC behavior
Slew rate programmable via SPI
Programmable current limitation from 1.5 to 8.6A via SPI
I/O pins are 18V-tolerant
Temperature-dependent current reduction
Extensive diagnosis capabilities via SPI
Several protection features

D/C motor applications
Electronic throttle controls
Exhaust gas recirulation systems
Variable valve controls
Variable geometry turbochargers
Swirl & tumble flaps

TLE 8250GVIO - Automotive High-Speed CAN Transceiver for Toyota Applications

ophilpott — Thu, 07 Oct 2021 08:33:03 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:03 AM

The TLE 8250GVIO is integrated in an RoHS-compliant PG-DSO-8 package and fulfills or exceeds the requirements of ISO11898-2. It is also compliant with Toyota's CAN Transceiver Evaluation specification. With its special feature set, the TLE 8250GVIO is the perfect fit for the Asian market, and the needs of Asian OEMs in particular.

As a successor to the first generation of high-speed CAN transceivers, the TLE 8250GVIO is fully pin-compatible and can therefore easily replace its predecessor, the TLE 6250GV33.

The TLE 8250GVIO is optimized for excellent passive behavior in power-down mode. This feature makes it ideal for mixed-supply CAN networks.

Features

Applications

High-speed CAN transceiver without wake-up
Data transmission rates up to 1Mbit/s
Fully compatible with ISO/DIS 11898-2
Stand-by mode
Suitable for 3.3V and 5V micro controllers
Bus short-to-ground and short-to-Vbat protection
Overtemperature protection
Optimized electromagnetic emissions behavior
Very high electromagnetic immunity against RF disturbances
AEC-qualified
RoHS-compliant

Automotive high-speed CAN networks

Tags: sp:infineon, 8250gvio, transceiver, tle, toyota, can

XE166M - 16-bit real-time signal controller with 32-bit performance and enhanced safety features

ophilpott — Thu, 07 Oct 2021 08:33:02 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:02 AM

The XE162M (LQFP-64), XE164M (LQFP-100) and XE167M (LQFP-144) microcontroller series is based on Infineon's popular and well-established C166 architecture. The devices offer new safety features for safety integrity level (SIL) 2 and 3 applications such as an MPU (Memory Protection Unit), MCHK (Memory Checker) and ECC (Error Correction) for flash memory and SRAM.

Features

Applications

80 MHz frequency = 80 MIPS performance
Up to 576 KB of flash memory and 50 KB of RAM
Up to 4 PWM units (CCU6) to drive any industrial 3-phase motor
Two very fast A/D converters
Up to 8 serial interfaces (USIC)

Motor controls
Power supplies
Transportation systems
Communication systems
Heating, ventilating and air-conditioning compressors and blowers
Servo drives
Appliance motors
Stepper motors
Industrial pumps
Vehicle systems

Tags: sp:infineon, xe164m, ze167m, c166, xe166m

XE166N - 16-Bit Real-Time Signal Controller with 32-Bit Performance and Enhanced Safety Features Optimized for Cost Sensitive Applications

ophilpott — Thu, 07 Oct 2021 08:33:02 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:02 AM

The XE162N (LQFP-64) and XE164N (LQFP-100) microcontroller series is based on Infineon's popular and well-established C166 architecture.

With it's optimized memory and peripheral set, the devices offer enhanced safety features for Safety Integrity Level (SIL) 2 and 3 applications. These include an MPU (Memory Protection Unit), an MCHK (Memory Checker) and ECC (Error CorrectionCode) for flash memory and SRAM.

Features

Applications

Up to 320KB of flash memory and 34KB of RAM
Two very fast A/D converters
80MHz frequency = 80 MIPS performance
Up to 4 PWM units (CCU6) to drive any industrial 3-phase motor
Up to 6 serial interfaces (USIC)

Transportation systems
Stepper motors
Heating, ventilating and air-conditioning compressors and blowers
Communicationsystems
Industrial pumps
Servo drives 1neuer Punkt: - Appliance motors
Vehicle systems
Motor controls
Power supplies

Tags: sp:infineon, xe164n, xe162n, microcontroller, c166

Automotive BLDC motor control made easy - New automotive 12V BLDC motor drive kit

ophilpott — Thu, 07 Oct 2021 08:33:02 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:33:02 AM

The kit is built around the two novel Infineon MCUs, namely the XC886 and the XC2236N both capable of running sensor(less). Coming along with optimized motor control software as well as a digitally isolated real time monitoring tool, the kit offers an easy-to-use reference platform.

As interface between MCU and the power-stage, the TLE 7184F bridge driver IC is used. This new member of the 3-phase bridge driver family is a highly integrated driver IC for up to six external N-channel MOSFETs, building the B6 bridge, to drive a Permanent Magnet Synchronous Motor (PMSM).

The application kit is designed for the purpose of motor control trainings/seminars and to evaluate the performance of real time capabilities of the Infineon microcontrollers. It offers designers a shorter time-to-market for energy efficient motor control designs targeting excellent torque dynamics, reduced noise and high system reliability.

Target applications are in the automotive area e.g. cooling fans, HVAC, oil/water/fuel pump, electronic power steering, small electric vehicle as well as in the industrial area such as cordless tools, automation, low-voltage solar water pumps, house-hold robotics.

Features

Applications

Scalable 3-phase inverter
TLE 7184F power board (12V - 24V/20A)
PMSM motor
12V switch mode power supply
XC886 (8-bit) with 16-bit arithmetic based MCU drive card capable of running sensor(less) (available for T_ambientup to 150°C)
XC2236N (16bit) based MCU drive card capable of running sensor(less)
Software packages: FOC and V/f for XC886 and XC2236N
Integrated protection features for high system reliability
Digital isolated real time monitoring tool
Compiler and debugger
Using Infineon p-channel MOSFET for reverse-battery protection, CAN transceiver, voltage regulators and 6 x n-channel MOSFETs for the B6 power stage

BLDC motors in:
Automotive applications
- Cooling fans
- HVAC
- Oil/water/fuel pump
- Electronic power steering
- Small electric vehicle
Industrial applications
- Cordless tools
- Automation
- Low-voltage solar water pumps
- House-hold robotics

Tags: sp:infineon, bldc, xc886, xc2236n, mcu

First Member of the XC800 Family Qualified to 150°C

ophilpott — Thu, 07 Oct 2021 08:32:46 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:46 AM

The SAL-XC886CLM-8FFA is the first member of the XC800 family qualified at Ta = 150°C to AEC-Q100 standard grade “0”. The XC886 @150°C is an optimized fit for a wide range of CAN networking applications in hot environments such as turbo chargers, throttle controls, valve controls, engine cooling fans, fuel/oil sensors and water/oil/fuel pumps. Additional key features include up to 32KByte of embedded Flash memory, an intelligent PWM unit, a highly accurate 10-bit ADC with fast conversion speed, a CORDIC and a Multiplication Division Unit (MDU) for fast mathematical computations.

Features

Applications

T_a = -40°C to 150°C
AECQ-100 - grade 0
Up to 32kB Flash
CORDIC/MDU for field-oriented control
Up to 2 CAN nodes

Specific automotive applications:
- Turbo chargers
- Valve controls
- Engine cooling fans
- Fuel / oil sensors
- Water / oil / fuel pumps
- Fail-safe EPS systems
Specific industrial applications:
- Controls for heating / furnace systems
- Embedded electronic motor controls

Tags: sp:infineon, xc800, salxc886clm8ffa

BGM 781N11 - Highly Integrated GPS Front-End Module

ophilpott — Thu, 07 Oct 2021 08:32:45 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:45 AM

The highly integrated BGM 781N11 is the world´s smallest GPS front-end module at a size of 2.5 x 2.5 x 0.7 mm³, which is more than 60% smaller than the closest competitor product offering a similar level of integration. It includes all key components in a module to amplify a GPS signal and filter out interference – the pre-filter, LNA and post-filter with high ESD robustness all in one package. The application circuit of BGM 781N11 has only 2 external components. The module has 8 kV ESD contact discharge integrated at the RF input pin, allowing customers to easily achieve their system ESD requirements (usually 8 kV) without additional ESD protection devices.

Features

Applications

Complete GPS receiver chain
Very high RF input power immunity
Excellent ESD protection (8 kV contact discharge integrated)
Very low parts count

GPS applications in mobile phones
GPS applications in personal navigation systems (PNS)
In-car navigation systems

Tags: sp:infineon, lna, bgm781n11, gps, esd

BCR 320U, BCR 420U - New LED Drivers for 0.5W LEDs

ophilpott — Thu, 07 Oct 2021 08:32:45 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:45 AM

The BCR 320U/BCR 420U LED driver family is a low-cost solution for driving 0.5W LEDs with LED currents from 150mA to 250mA. Internal breakdown voltage is 20V (BCR 320U) and 40V (BCR 420U). This is the maximum voltage that the LED driver IC can sustain when connected to it directly.

The BCR 320U/BCR 420U can be operated at supply voltages above 20V and 40V respectively by simply stacking a series of LEDs in front of the LED driver IC, resulting in a certain voltage drop depending on the forward voltages of the LEDs. This brings the voltage at the supply pin of the driver IC down to a value below the maximum threshold.
A digital input pin (BCR 321U, BCR 421U) allows the LEDs to be dimmed via a microcontroller with frequencies up to 10 kHz. At higher temperatures, the output current is reduced by 0.2%/K as a result of the negative thermal coefficient of the LED driver IC.

With no need for additional external components such as inductors, capacitors or free-wheeling diodes, the BCR 320U/BCR 420U LED driver family is a cost-efficient and PCB-saving solution for driving 0.5W LEDs.

Features

Applications

Suitable for supply voltages of 20V and 40V (depending on the device), configurations above this also possible
Digital PWM input pin for dimming with frequencies up to 10kHz
Up to 1mW power dissipation in a small SC-74 package
Negative thermal coefficient reduces output current at higher temperatures
Easy paralleling of drivers to increase current
PB-free (RoHS-compliant) package

Architectural LED lighting
Channel letters for advertising
LED strips for decorative lighting
Retail lighting in fridge and freezer cases
Emergency lighting (steps lighting, exit way signs, etc.)
Ship, train and aircraft interior illumination

Tags: sp:infineon, bcr42-u, bcr320u, led_lighting, infineonlighting

Improve System Sensitivity with High-Performance ESD-Hardened LNAs

ophilpott — Thu, 07 Oct 2021 08:32:45 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:45 AM

The popular transistor LNAs BFP 640(F), 720(F) and 740(F) are now also available as high-performance, ESD-robust devices. The BFP 640(F)ESD, 720(F)ESD and 740(F)ESD offer up to 2kV ESD protection (HBM). That makes them unique in the market with an excellent noise figure of 0.8dB at 5.5GHz combined with exceptional ESD robustness.

They also offer best-in-class gain and linearity. The footprint and size of the new ESD-enhanced transistors is the same as that of the existing LNAs. This makes it easy for customers to enhance the ESD robustness of existing circuits without needing additional (ESD protection) devices. So customers can now look forward to easier production handling and more cost-effective ESD protection designs!

Features

Applications

Maximum power input at RF_in of up to 20dBm
Best-in-class noise figure, gain and linearity performance
Large portfolio with various linearity, gain and package size combinations possible
Small package size
ESD protection of 2kV HBM

LNA (Low Noise Amplifier) for:
- WLAN (2.4 and 5.5GHz)
- ISM band
- GPS
- SDARS
- 5.8GHz cordless phones
- Other wireless applications up to 10GHz
Active mixer
Oscillator up to 12GHz

Tags: sp:infineon, lna, bfp, esd

TVS Diode for FM Radio Antenna Systems

ophilpott — Thu, 07 Oct 2021 08:32:44 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:44 AM

The ESD5V3L1U-02LRH is our new diode designed for the ESD protection of electronic devices incorporating FM radio antenna systems. Placed behind the antenna, this diode can absorb ESD discharges of up to ±30kV (IEC61000-4-2 contact discharge) and thus protect ICs downstream of the RF-in port. Available in a 0402 EIA–equivalent package, this device is ideal for space-constrained applications as the small form factor means it can be easily integrated in front of the LNA.

Flanking the ESD0P2RF diode series, the new diode complements our antenna protection offering. The ESD5V3L1U-02LRH is the solution of choice for providing very low dynamic resistance/low clamping voltage in FM radio systems beyond the GSM environment. In the case of hostile interfering environments, the bidirectional ESD0P2RF series (already in mass production) is the preferred ESD solution.

Features

Applications

Enhanced ESD absorption capability of ±30kV contact and air discharge exceeding industry standard IEC61000-4-2
Ultra-low dynamic resistance of only 0.3Ω enabling excellent ESD clamping performance in low-voltage signal (max +5.3V) applications
Very low leakage current (less than 1nA) for extended battery lifetime in portable electronics
Low capacitance of 1 pF (1MHz)
Leadless 0402 EIA-equivalent package (1.0x0.6x0.39mm) for PCB space savings
ESD5V3L1U-02LRH complies with RoHS and directive on elimination of halogen and is in mass production

ESD protection of devices incorporating FM radio antenna systems without GSM
ESD protection of keypad, touchpad, buttons and other general purpose applications
ESD protection of power lines

Tags: sp:infineon, tvs, fm, antenna

New ESD/EMI Protection Device for microSD Card Interface - BGF 117

ophilpott — Thu, 07 Oct 2021 08:32:44 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:44 AM

You'll find a microSD card in just about every portable device you can think of. This removable memory extension is about 4 times smaller than a standard SD card, which makes it the smallest removable Flash memory card on the market. Hence, the microSD card has made its way into applications ranging from digital still cameras and MP3 players through GPS navigation devices to mobile phones.

The microSD card interface is an expensive IC that requires protection. We have introduced a new device - the BGF 117 - that protects this interface from being destroyed by an electrostatic discharge (ESD) event and from malfunction caused by electromagnetic interference (EMI). The BGF 117 achieves this by combining high-level ESD protection devices with an EMI filter in one small device. It provides simultaneous protection for a total of 7 lines - 3 data lines, the data/direction control line, clock line, command line and voltage supply line.

The BGF 117solves numerous design challenges by:
a) reducing the system bill of materials, also cutting logistical and pick&place effort
b) minimizing the PCB area occupied by standard building blocks to leave more room for new and sophisticated applications
c) integrating high-level ESD protection to immunize the system against ESD strikes and enhance reliability
d) implementing EMI filters to prevent the system from interference from unwanted frequencies, which can adversely affect data transfer and data integrity
e) designing in compliance with regulations and specifications

Features

Applications

Environmentally friendly, fully green (RoHS and WEEE) device
7-line ESD/EMI protection combined in one device
High level ESD protection of +-15kV according IEC61000-4-2 contact discharge
Integrated pi-type EMI filter for effective reduction of interfering frequencies
Ultra-low line capacitance of only 8pF to retain signal integrity
Integrated pull-up and line termination resistors
Cost- and space-effective wafer level package (WLP) measuring 1.55x1.55mm²
Environmentally friendly, fully green (RoHS and WEEE) device

ESD/EMI protection for
- microSD card
- miniSD card
- SD card
- MMC card
Mobile phones
MM communication modules
Consumer electronic devices like DCS, VCR, MP3 players, GPSnavigation devices

Tags: sp:infineon, bgf117, microsd, emi, esd

SmartPIM and SmartPACK Power Modules Use Self-Acting PressFIT Assembly

ophilpott — Thu, 07 Oct 2021 08:32:44 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:44 AM

Infineon's new Smart modules are designed for more cost-effective and compact inverter designs by simplifying the mounting process and increasing reliability. The Smart modules combine PressFIT technology with a sophisticated housing concept.

Their new duplex frames achieve a very high level of reliability during the mounting process and subsequent operation. The PressFIT pin is connected to the PCB, the PCB is stabilized and the module is mounted on the heatsink in one single step.

The Smart1 package supports current ratings up to 75 A in Pack and 35 A in PIM configurations at 600 V and 1200 V.

With their self-acting PressFIT assembly and the benefits of PressFIT technology, these new-generation Smart modules raise the bar for cost-efficient designs.

Features

Applications

Press-in process by tightening the module
Robust housing concept with decoupled DCB makes cracks almost impossible
Flexible mounting possibilities
Reduced process time
Gas-tight and reliable PressFIT connections suitable for sense signals
Decreased FIT rates

Industrial drives
Uninterruptible power supplies (UPS)
Solar inverters
Aircon systems
Welding systems
Inductive heating systems

Tags: sp:infineon, smartpack, smartpim, pressfit

PrimePACK™︎ High-Power IGBT Modules for 1200V and 1700V

ophilpott — Thu, 07 Oct 2021 08:32:43 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:43 AM

Focused on the industrial and traction inverter market, PrimePACK™ IGBT modules are the new trendsetters in the power range up to several megawatts. Particularly suited to the renewable energy industry and to commercial, construction and agriculture vehicles (CAV), PrimePACK™ modules comply with the highest reliability and lifetime demands. Intelligent substrate layout and a well-engineered busbar construction make for a smart solution with optimized heat distribution and minimal stray inductance. The slim shape of the module baseplate reduces the cooling area required. And the latest mounting technology reduces system costs significantly by enabling automated assembly. In a nutshell, PrimePACK™ IGBT modules are the ideal way to speed the success of your application designs.

Features

Applications

Improved thermal properties
Wide range of operating temperatures
Integrated NTC with high isolation
600V/1200V modules with SiC diodes and fast switching IGBT available
Low stray inductance
Highest vibration capability
1200V: 450A-1400A half-bridges and chopper
1700V: 450A-1400A half-bridges and chopper
Traction and industry versions

Wind power systems
Traction systems
Industrial drives
Welding machines
Solar installations
Construction and agriculture vehicles
Power supplies

Tags: sp:infineon, igbt, primepack

New 3-Level Phase Leg Modules for Improved Efficiency

ophilpott — Thu, 07 Oct 2021 08:32:43 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:43 AM

We have introduced a complete family of 3-level phase leg modules ranging from 30A up to 300A. The modules are available in Easy 1B, Easy 2B and EconoPACK™4 housing. Relying on PressFIT technology, these devices have the advantage of fast and solder-less assembly combined with highest reliability and efficiency levels plus optimized filter costs. Low inductive designs facilitate the design process and optimize system performance.

3-level phase leg modules are ideally suited to power supply, solar and industrial drive applications. The Easy2B and EconoPACK™4 modules rely on 650V chip technology. Hence, all modules offer excellent setup for systems even with high DC link voltages at excellent system cost.

EconoPACK™4 modules in 3-level configurations feature screw power main terminals, making them ideal for high current capability.

Features

Applications

Highly efficient solution
Low inductive design
High reliability due to PressFIT
Optimized thermal performance

UPS (uninterruptible power supplies)
Solar inverters
Industrial drives

Tags: sp:infineon, econopack

OptiMOS™︎ in Low-Voltage Drives - Faster, Smaller and More Efficient

ophilpott — Thu, 07 Oct 2021 08:32:43 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:43 AM

Today high power density and high efficiency are the major driving factors in applications like motor control. Moving from TO-220 to SuperSO8 reduces space consumption by 90% and enables a huge power density increase. With 3 times lower parasitic inductance than TO-220, SuperSO8 offers optimal switching performance and the highest levels of system efficiency. Furthermore, spikes in the system can be reduced due to very low parasitics. This minimizes design effort. Reduced switching noise and improved EMI make SuperSO8 an ideal package for high-performance applications.

With up to 100A current capability per device, SuperSO8 is ideal for high-current applications such as motor drives. The large contact area between the lead frame and the board ensures a low thermal resistance. 2 SuperSO8 devices can replace one standard D²PAK with equivalent thermal and electric behavior but a 50% reduction in footprint. Our devices offer the industry's lowest R_DS(on) and gate chargeacross the entire voltage range from 25V up to 250V. These benchmark products in SuperSO8 bring the highest efficiency and power density levels to your system.

Features

Applications

Minimal device paralleling required
System cost improvement
Lowest board space consumption
Easy design-in
Highest efficiency and power density
Halogen-free

Battery driven vehicles
Cordless electric tools
Electric toys
Industrial machines

Tags: sp:infineon, optimos, superso8

MIPAQ™︎ serve - The Module with Driver Electronics

ophilpott — Thu, 07 Oct 2021 08:32:43 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:43 AM

MIPAQ™ serve is a highly reliable power module integrating an IGBT sixpack configuration, a full set of driver ICs as well as digital temperature measurement. These functionalities make MIPAQ™ serve a full plug-and-play solution for high-current drive applications.

Inside the module, there are galvanically isolated drivers based on Infineon's Coreless Transformer Technology. The elimination of optical couplers further enhances the module's long-term stability.

Featuring the newly designed EconoPACK™ 4 packages and the latest chip technology IGBT4, these devices cover the 1200V range and manage currents of 100A, 150A and 200A. The voltage and logic signals are transferred through standardized connectors supporting plug-and-play detection. The actual current is provided externally via M5-sized screws.

Features

Applications

EconoPACK™ 4 package plus driver on top for reduced board space in the application
Up to 200A nominal current
Designed for robustness with ultrasonic welding technology, injection-molded DC bus bar, control pins and power terminals
Highly sophisticated CLT for improved system reliability due to elimination of optoelectronics
True baseplate temperature measurement providing digital information to the user - galvanically separated
Increased output power and efficiency due to optimized dead time
Industry-standard connectors
Plug & play solution for high-current drives
150°C junction temperature
RoHS compliance

Industrial drives, such as compressors, pumps and fans
Uninterruptible Power Supplies (UPS)
Air conditioning systems
Solar inverters

Tags: sp:infineon, mipaq, igbt, high_power, econopack

KP236 - Miniaturized Absolute Pressure Sensor IC with Programmable Transfer Function

ophilpott — Thu, 07 Oct 2021 08:32:42 GMT

Current Revision posted to Documents by ophilpott on 10/7/2021 8:32:42 AM

The KP236 is a miniaturized absolute pressure sensor IC based on the capacitive principle. It is surface-micromachined with a monolithic integrated signal conditioning circuit, implemented in state-of-the-art 0.5 micron robust BiCMOS technology. Because the KP236 is a high-precision IC for cost critical solutions, the chip is packaged in a "green" low-cost SMD (surface-mounted device) PG-DSFO-8-16 housing. The sensor was developed for measurement of barometric air pressure (BAP). This is an important parameter in engine management applications to compute the air-fuel ratio provided to the engine and for controlling spark advance to optimize engine efficiency. High accuracy and robustness make it an ideal fit for automotive and industrial applications.

Features

Applications

Full compensation
Broken wire detection
High sensitivity and linearity
Customized transfer functions
Optional output clamping
Green SMD package PG-DSOF-8-16
Inverse polarity protection

Engine management
Seat comfort (KP236N6165)
Barometric pressure
Medical devices
Altitude compensation

Tags: sp:infineon, ic, kp236, bicmos, pressure_sensor, pgdsfo816