Molex EXTreme Power

andy — Thu, 07 Oct 2021 07:53:06 GMT

Current Revision posted to Documents by andy on 10/7/2021 7:53:06 AM

EXTreme LPHPower™

High-current, low-profile EXTreme LPHPower™ connector extends mounting flexibility to backplane or midplane mating applications.

www.youtube.com/watch

The EXTreme LPHPower™ Connector is a mixed, high-current power and signal connector system that picks up where traditional connectors leave off. Designed with power blades parallel to the PC board, its extremely low-profile height of only 7.50mm (.295") allows greater system airflow while taking up 53% less space than traditional connectors with the same current rating.

Designed as a new generation of power interconnect, Molex's EXTreme LPHPower™connector provides up to 127.0A per linear inch of space, has two isolated power blades in each housing bay and can be mated in a right-angle, co-planar or vertical orientation. EXTreme LPHPower™ can be mated in a traditional two-piece connector system, or as a one-piece receptacle-to-cardedge / bus-bar application.

Applications:

Features & Benefits:

Data/Communications:
Test equipment
Workstations

Industrial Production Equipment:
Industrial Controllers

Networking:
    1U rack box
    Backplanes
    Power Supplies
    Servers

Telecommunications
Routers
Switches

EXTremePower LPH
View products or buy:
Europe US Asia

DATASHEET: [CLICK]

Low-profile design, 7.50mm (.295") height

Enhances system airflow and provides 127.0A per linear inch

Receptacle sides mates to Molex standard LPH plug or an industry standard 1.57mm PCB gold finger card edge.

Extends design flexibility

Rated for current interruption

Meets hot-plugging requirements

Rugged signal and power contacts

Reduce the potential for stubbing or damage

Two isolated power contacts per housing bay (top and bottom)

Allows power and return circuits in a single bay for a total of 60.0A per power bay

____________________________________________________

EXTreme MicroPower™

Low-profile, high-current EXTreme MicroPower header provides versatile solutions in a compact design

Designed for high-current density applications, Molex's EXTreme MicroPower header is soldered directly to PCBs such as a Voltage Regulator Module (VRM) or a mother-board using a slotted via. With a current rating of 16.0A per blade at 30° T-rise, Micro-Max Power may be used in any board-to-board application where power transfer is needed through a non-separable interface in a compact design.

EXTreme MicroPower headers are available in circuit sizes ranging from 4-to-24 blades in a single-row configuration. Optional voided circuits are available to allow for use in high-voltage applications.

Applications:

Features & Benefits:

Consumer
Desktop

Data/Communications
Workstations

Networking
    Blade server
    Point-of-load power transfer
    Router/Switch
    VRM modules

4.17mm (.164") connector height off the PCB	Low-profile design enhances system airflow
Non-separable interface	Allows for higher-current and greater density capability with lower resistance plane-to-plane compared to similar products with separable interfaces or standard stick headers
Compact size	Improves airflow and saves PCB space
Optional voided circuits	Design flexibility for high-voltage applications
Two blade lengths available	Accommodates 1.57 to 2.36mm (.050 to .093") PCB thickness
Reliable and compact where change-out is not needed	Easily adaptable to many applications

EXTreme MicroPower™
View products or buy:
Europe US Asia

DATASHEET: [CLICK]

____________________________________________________

EXTreme ZPower™

EXTreme ZPower is a high-current, rigid, board-to-board and wire-to-board mezzanine style interconnect designed to transfer power loads from one PCB to another.

EXTreme ZPower connectors utilize a unique, dual interface which results in long-term reliability. The EXTreme ZPower connector allows 50.0A to be carried between parallel boards in 0.232 in², with less than .020 milliohms initial plane-to-plane resistance.

The EXTreme ZPower connector is press-fit into the PC base board. The PC top board is then screwed down on top of the EXTreme ZPower connector, forming a high-pressure interface. A unique, dual Hertzian contact design allows the screw to be installed without affecting the compliant-pin interface in the opposing PCB.

The rigid nature of this interconnect allows high-density PCB applications to benefit from real-estate savings, by employing
EXTreme ZPower in a dual role. EXTreme ZPower performs as both a high-reliability power connector and a durable stand-off, relieving the need for separate mechanical stand-offs in some applications.

EXTreme ZPower can also be used as an efficient, wire-to-board connector. This application is achieved through using standard wire-crimp, ring-lug terminals as the mating interface to the EXTreme ZPower screw-down terminal interface.

Features & Benefits:

Z-Power
View products or buy:
Europe US Asia

DATASHEET: [CLICK]

50.0 and 30.0A versions available	Allows for a variety of applications
Low-contact resistance	Low heat generated
Compliant-pin interface	Provides a solderless termination
Rigid, screw-down interface	Ensures a high-pressure, reliable contact
Patented internal terminal design	Allows for coplanarity mismatch in parallel boards
Captured internal nut	Provides ease of assembly
Board-to-board or wire-to-board	Provides flexible design options

____________________________________________________

View Molex EXTreme Power roadmap: [CLICK]

~~Visit~~ or Join Interconnect group
(New technologies, discussions, help)

Tags: lph, molex, compliant_pin, high_current, ssi, extreme_micropower, at:npi, high_power, blind_mate, nte14-indcont, nte14-medical, nte14, power_tap, power_standoff, extreme_power, power_supply, ring_lug, z-power, int:npi, nte14-connectors, 50a, card_edge, 30a, press-fit, power_&_signal, board_to_board

Molex EXTreme Power

Molex EXTreme Power

Industrial Production Equipment: Industrial Controllers

Networking: 1U rack box Backplanes Power Supplies Servers

Telecommunications Routers Switches

EXTreme MicroPower™

Low-profile, high-current EXTreme MicroPower header provides versatile solutions in a compact design

Consumer Desktop

Data/Communications Workstations

Networking Blade server Point-of-load power transfer Router/Switch VRM modules

EXTreme ZPower™

EXTreme ZPower is a high-current, rigid, board-to-board and wire-to-board mezzanine style interconnect designed to transfer power loads from one PCB to another.

Industrial Production Equipment:
Industrial Controllers

Networking:
1U rack box
Backplanes
Power Supplies
Servers

Telecommunications
Routers
Switches

Consumer
Desktop

Data/Communications
Workstations

Networking
Blade server
Point-of-load power transfer
Router/Switch
VRM modules