https://community.element14.com/products/manufacturers/rohde-schwarz/Thanks to its industry-leading technological expertise, the independent group is a reliable partner for shaping the future of communications, information and security. Rohde & Schwarz develops, produces and markets a wide range of electronic capital gen-USTelligent Community 12https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236497Thu, 23 Jul 2026 01:05:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f454658d-c89a-4e34-a9ff-3a2899de30f3shabazBeing a customer isn't a requirement, all that's required is a corporate email and corporate website URL. Once approved, that then enables downloads for almost any R&S product (even for businesses that have purchased nothing from them).https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236496Thu, 23 Jul 2026 00:56:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:55e9ef9d-3166-4dba-8628-108b0c0dc050neuromodulatorYeah, I might try that, but I wonder if they'll bother, considering I'm not their client.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236495Thu, 23 Jul 2026 00:47:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:daa6d2b6-fac4-4aa4-973b-9b33a2a6a925neuromodulatorContacted Avnet and they tell me that I should contact Element14 instead. Who is in charge of roadtests now?https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236492Wed, 22 Jul 2026 20:43:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e2ded5d8-1613-4cf1-af69-3675deca4893Obar94I purchased an FSH4 many years ago. I was told recently that technical support is now only available to business customers, which reduces the benefit from registering on-line using a non-personal email address. Perhaps a knowledgeable calibration lab that also sells R&H equipment would be a good resource in order to obtain technical support.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236489Wed, 22 Jul 2026 20:33:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:44b49b2d-775c-4419-b14a-26aac461f3f6neuromodulatorInteresting thread, what a mess!https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236488Wed, 22 Jul 2026 20:32:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:030fd652-beeb-43b4-a1f3-a947d0506d24neuromodulatorI received it through an element14 RoadTest. I’m currently contacting Avnet to see whether they can help. Thanks for the responsehttps://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236400Thu, 16 Jul 2026 10:45:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6c10edb4-48fe-4bcf-aad8-57fc9610be69kk99There was a thread about it on EEVblog forum: www.eevblog.com/.../ I think that it is worth contacting the distributor. They should help in that case.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updates/236398Thu, 16 Jul 2026 10:22:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:09bf7c4d-def3-4a2d-a68d-8887c191449bshabazHi, I think the requirement is a corporate e-mail address, and corporate website. You may possibly be in luck if you approach the business that sold you the instrument, since they may download items on your behalf, i.e. through their product support. Otherwise, simplest way is to ask your org if you can register and download using their details, or, create your own org (but note that comes with overheads/paperwork though, and some expense depending on country it is done in).https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/57101/access-to-r-s-firmware-updatesThu, 16 Jul 2026 09:58:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:9263d942-bbda-44a2-9af7-c333258a33dcneuromodulatorI recently discovered that my old R&S account no longer works. When I tried to create a new one, I received an email saying that access is limited to business customers. Has anyone managed to solve this issue? If so, how?https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/56865/my-fsh4-doesn-t-sync-its-internal-frequency-reference-to-gpsMon, 20 Apr 2026 02:55:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ccd52ea5-d5a8-40a2-bb90-ce5de6576f11Obar94Hello, I’ve used my FSH4 spectrum analyzer (3.6 GHz version) for many years. I’ve found that while the supplied Garmin GPS accessory for the FSH4 allows it to access GPS satellite information, the FSH4 does not use it to synchronize its internal frequency reference with the information provided by the GPS signal (as verified using a second spectrum analyzer with its own GPS-locked external reference). Consequently, I’ve always had to use an external 10 MHz reference signal input to the FSH4's accessory BNC connector whenever I needed accurate frequency calibration with this instrument. Without doing this, the instrument internal frequency accuracy is only good for a little better than about 1 ppm. This is strange, because the FSH4 manual states that the instrument is supposed to sync frequency with the GPS system when the antenna is connected, it is even supposed to remember the correction parameters for a day or so after the antenna is disconnected. Could someone please assist me as to whether I may not have configured the instrument settings correctly? I am a retired electrical engineer. Thank you for any suggestions!https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/56456/rohde-and-schwarz-rto64-probe-calibration-not-working/231977Thu, 20 Nov 2025 10:01:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1537e301-b8cf-416a-8c10-d51ce41afbfbHIYOTHYes It was contact issue.I did not press the positive (black connector properly).After that the results are coming as expected please see the below image.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/56456/rohde-and-schwarz-rto64-probe-calibration-not-working/231959Wed, 19 Nov 2025 17:38:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:322fe4d3-29f1-4098-88c3-70d6a492608cGough LuiThe screenshot appears to indicate DC coupling was used, but I suspect it to be a bad contact and capacitive coupling of the signal due to the low 20mV amplitude.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/56456/rohde-and-schwarz-rto64-probe-calibration-not-working/231958Wed, 19 Nov 2025 17:35:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5cf8fd98-3f64-4aef-8ca6-37e91e958927Gough LuiPlease check your probe hook grabber is fully seated by pushing down until it clicks. Alternatively, remove it and check the probe pin is properly seated. Also check the ground clip is properly clipped into place and is making good contact. Also check the BNC connector in case there is a damaged pin. Try exchanging channel or probe to see if you can eliminate the issue. Your low amplitude and distorted waveform suggests to me that there is a bad contact. You should be able to best compensate the probe without the ground clip lead, by lying the tip across the ground hook with the tip in contact with the 1kHz square wave signal loop. There is a probe compensation app to help you dial in the alignment.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/56456/rohde-and-schwarz-rto64-probe-calibration-not-working/231956Wed, 19 Nov 2025 16:57:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e7e2a772-48cd-40e7-99bc-620ab196a8cbdougwIt looks like you have it set for AC coupling - it should be set to DC coupling.https://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/56456/rohde-and-schwarz-rto64-probe-calibration-not-workingWed, 19 Nov 2025 15:17:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:014a6366-817c-47fe-b9ef-4a114f6f0d11HIYOTHDaer Team, I am trying to calibrate the probe of RTO64.But I am getting the below waveform.Could you please help me Could you please help me.oscilloscoperohde and schwarzhttps://community.element14.com/products/manufacturers/rohde-schwarz/f/forum/55129/simulazione-batteria-ngm202Tue, 24 Sep 2024 11:21:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a4806d89-aedf-43c9-b0f7-8a38c5fe10a3Simonedb32Ciao a tutti, ho una domanda per voi, forse è anche troppo banale. Sto simulando il comportamento di una batteria a ioni di litio con l'utilizzo di ngm202, sto usando come carico una resistenza di 110 ohm. Durante la fase di scarica va tutto bene, per la fase di carica appena la scelgo, ocp chiude il canale e quindi non avviene la carica. Il problema sta nella corrente che ha un valore positivo molto piccolo? Oppure per simulare la carica devo collegare un generatore di tensione anzi ché una resistenza?https://community.element14.com/products/manufacturers/rohde-schwarz/w/documentsSat, 20 Nov 2021 00:21:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:222cb121-0120-4822-8bf8-ff94de91479chttps://community.element14.com/products/manufacturers/rohde-schwarz/w/documents/27209/rohde-schwarz-oscilloscopes-2Fri, 12 Nov 2021 01:49:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:43d19519-b33d-40e6-9436-796d88f06dc3rohde&schwarzOscilloscopes that fit your requirements and your budget, from top value to top performance. Oscilloscope innovation that delivers measurement confidence. Excellent signal fidelity, high acquisition rate, an innovative trigger system and a clever user interface - that’s what you get with Rohde & Schwarz, a leading manufacturer of oscilloscopes. More information in the R&S oscilloscope brochure! Celebrate with us our 10th birthday and take part in our contest! 10 milestones - 10 products to be won: And how can you win? Just tell us which of the 10 milestones is most important for you and which application you want to measure with it? Submit your idea now!r&s®scope riderr&s®rtb2000r&s®rta4000r&s®rte1000Rohde & Schwarz Oscilloscopesr&s®rto2000r&soscilloscopesoscilloscopesr&s®rtm3000r&s®rtc1000https://community.element14.com/products/manufacturers/rohde-schwarz/w/setup/20967/group-intro-widget-contentWed, 13 Oct 2021 17:44:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2efdb8ab-67a3-4728-9286-9d0534a6b379ChristyZWelcome to the Rohde & Schwarz page on element14. Here you can find things such as our latest news, training videos, and product details. Additionally, you can engage with us in our forums.group_introhttps://community.element14.com/products/manufacturers/rohde-schwarz/w/setupWed, 13 Oct 2021 17:44:00 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d1a9a86d-2a4e-4b92-95e0-946f7ee6f1f6