UART COMMUNICATION

Question

Hi, 
 When trying to communicate with BP359C & BP35C5-T01 via UART from STM32F103RCT6 with Echo mode off. When query is sent a response is received, but when "Ip 2001:db8::26" is sent to change the IP address a response is not received. 
 Thanks Revanth M

neilp · Accepted Answer

Hi Revanth, 
 Thank you for the question. 
 The module you are operating is working properly. You need to use &ldquo;ip&rdquo; command to confirm the configured address. By the way, which buffer are you referring to? It's not clear what your concern is. 
 Kindest regards, 
 Neil 
 ROHM Semiconductor

neilp · Answer

Dear Revanth, 
 Thank you for the question, and we trust this provides a suitable response based on details supplied. 
 Commands must begin with a lowercase letter, therefore, sending the following should work. 
 "ip.2001:db8::26" 
 Best regards, 
 ROHM Semiconductor

UART COMMUNICATION

Top Replies