Forum - Recent Threads

RE: Need help on identifying what kind of connectors or cables is needed

dougw — Wed, 28 Sep 2022 04:34:28 GMT

These look like Amp parts (TE Connectivity):

Buy Now Buy Now

Need help on identifying what kind of connectors or cables is needed

Samwise — Wed, 28 Sep 2022 03:57:14 GMT

SOS. Need help to identify what type of wires to connect between these two ends.

1. Connector from 5 pin female to the LAN female socket

{gallery:autoplay=false}Connector from 5 pin female to LAN socket
IMAGE TITLE: 5 PIN female
IMAGE TITLE: LAN Socket

{gallery:autoplay=false}Connector from 5 pin female to LAN socket

IMAGE TITLE: 5 PIN female

IMAGE TITLE: LAN Socket

2. Connector from pigtail? female to device (?)

{gallery}Connector from pigtail female to device
IMAGE TITLE: Pigtail female
IMAGE TITLE: Pigtail female
IMAGE TITLE: Pigtail female
IMAGE TITLE: Pigtail female
IMAGE TITLE: Device

{gallery}Connector from pigtail female to device

IMAGE TITLE: Pigtail female

IMAGE TITLE: Device

Would appreciate any guidance given or direction point, thank you very much.

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 06 May 2014 16:34:53 GMT

Hello Samantha,

Is there a way to extend LCD ribbon cables? I am modifying a laptop and the original cables don't quite reach the new screen position.

This thread has been closed to new questions.

However, we welcome you to Post Your Question about Communications in the element14 Community Wireless Communications Technology group. You'll find many fellow members and experts who have just the answer you're looking to find!

Thank You, Your Friends at element14 Community

RE: Have a question about connectors or cables? I can help!

fidelsalinas — Sun, 14 Jul 2013 01:36:35 GMT

The filesystem and OS take upspace, so you won't get to use your full 250 gigs. And I do believe this isn't the place for this topic. again, with the same question. Don't spam the boards and just wait for your a response to your question. thank you

F/S

RE: Have a question about connectors or cables? I can help!

Former Member — Sun, 14 Jul 2013 00:30:03 GMT

hi guys i need some help with my hardrive it is 250GB i wont a 20GB and 150GB and 50GB partishion but when i try to it gives me 19.9GB and 149GB one and 49.9GB one help Plzz

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 02 Jul 2013 13:16:16 GMT

Hello Vincent, we do not offer the products you are referencing.

Samantha

Customer Engineering Support

800/726-8329 x2267

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 02 Jul 2013 09:43:33 GMT

Hi,

I am trying to source BELT, V B PROFILE 980 MM for a project I am working on. I notice you supply a B930 which may be too short.

Can you help?

RE: Have a question about connectors or cables? I can help!

murrayadler — Thu, 23 May 2013 15:41:50 GMT

why does Python print 69 instead of %. I have tried this on 2 keyboards with the same result.

RE: Have a question about connectors or cables? I can help!

Former Member — Wed, 22 May 2013 15:28:30 GMT

Thank you Samatha….

RE: Have a question about connectors or cables? I can help!

Former Member — Wed, 22 May 2013 15:26:29 GMT

Bettie, I am not familiar with the Belden/ T& B wire, you would need to contact Belden directly.

Samantha

Customer Engineering Support

800/726-8329 x2267

RE: Have a question about connectors or cables? I can help!

Former Member — Wed, 22 May 2013 14:28:33 GMT

Hello,

I have a question about a Belden/T&B connector, SNS6NS. What does the PG- in front of the part number mean? Is the SNS6NS obsolete?

Thanks,

Bettie

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 25 Sep 2012 14:28:41 GMT

Samantha,

I need to build a tester that interfaces with a PCB using a Samtec HTSS-120-01-L-DVHTSS-120-01-L-DV connector Is there a mate to this connector with solder cups or crimp pins to connect a cable to this connector

Have a question about connectors or cables? I can help!

Former Member — Tue, 22 Dec 2009 19:56:49 GMT

This thread has been closed to new questions.

Thank You, Your Friends at element14 Community

   Samantha Martin

[View:/resized-image/__size/130x134/__key/communityserver-discussions-components-files/45/contentimage_5F00_33994.jpg:130:134]

I've been with Samtec for 19 years. My expertise spans from manufacturing, sales and application assistance for connectors and cables.

RE: Have a question about connectors or cables? I can help!

Former Member — Fri, 08 Jun 2012 13:56:25 GMT

Hi Alastair, is your question regarding Samtec compnents? What company are you with and what is the part number you ordered.

RE: Have a question about connectors or cables? I can help!

Former Member — Fri, 08 Jun 2012 13:33:25 GMT

I ordered my pi a whils back and have been notified that it will be delivered by the end of june. I have moved address since the order and need to change my details. I have tried loging in which didn't work, replying to the email and sending an email to Farnell that I found on the internet. Can anyone advise how I am supposed to change my shipping address?

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 14:17:19 GMT

ok, it's guillaumegrenier@ymail.com

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 14:15:44 GMT

can you supply me with you email address and I can send you the test data we have available. My email address is: samantha.martin@samtec.com

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 14:06:40 GMT

IDMD.

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 13:32:01 GMT

We perform testing on the assembly, not the bulk cable, that testing would be done by the mfg of the bulk cable. It is 300 volt cable. Are you using IDMS or IDMD?

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 13:27:05 GMT

I'm talking about bulk flat ribbon cables, there is no specification about DWV on ref IDM-24-S-12.00-G for instance. Why don't you give a value when the cable is not assembled ?

Thanks

Guillaume.

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 13:15:53 GMT

Hello Guillaume, are you looking for details on just bulk flat ribbon cable or are you referring to IDC assemblies like we offer? For our flat ribbon cable assemblies we dont list the DWV details on the catalog pages but the information is included in the test reports which are available on line.

RE: Have a question about connectors or cables? I can help!

Former Member — Tue, 15 May 2012 08:44:40 GMT

Hello Samantha,

I got a question about Flat ribbon cables.

Why manufacturers never give a dielectric test value ?

Thanks for your help.

Guillaume G.

RE: Have a question about connectors or cables? I can help!

Former Member — Fri, 02 Mar 2012 23:58:32 GMT

I've tried clicking on the "Do not show this again" check box but it doesn't help.

Chris

RE: Have a question about connectors or cables? I can help!

Former Member — Thu, 01 Mar 2012 07:08:58 GMT

Hi Samantha,

Thank you for your fast reply.

I am sorry, I need 500 max. I was hoping Samtec was making the 4 p

version for a special customer.

I will look at my other options.

Thank you for sending me the information quickly.

Kind regards,

Cuno

Met vriendelijke groet, / Kind regards,

Cuno Walters

Hardware engineer

T +31 313 880 482

I http://www.eijkelkamp.com

Volg ons via https://twitter.com/#!/RoyalEijkelkamp, http://www.youtube.com/user/RoyalEijkelkamp, http://www.linkedin.com/company/eijkelkamp-agrisearch-equipment en http://www.facebook.com/Royal.Eijkelkamp / Follow us on https://twitter.com/#!/RoyalEijkelkamp, http://www.youtube.com/user/RoyalEijkelkamp, http://www.linkedin.com/company/eijkelkamp-agrisearch-equipment and http://www.facebook.com/Royal.Eijkelkamp

Houdt u het milieu in gedachten voordat u deze e-mail print. / Please consider the environment before printing this e-mail.

Van: SamanthaM messages@element14.com

Verzonden: woensdag 29 februari 2012 18:27

Aan: Cuno Walters

Onderwerp: - Re: Have a question about connectors or cables? I

can help! [c3hhbj-1v0a-yyt]

element14 <http://www.element-14.com?CMP=e14notificationemail_header>

Re: Have a question about connectors or cables? I can help!

created by Samantha Martin

<http://www.element14.com/community/people/SamanthaM> in Samtec - View

the full discussion

<http://www.element14.com/community/message/45317#45317/l/re-have-a-ques

tion-about-connectors-or-cables-i-can-help>

Attachments:

RE: Have a question about connectors or cables? I can help!

Former Member — Wed, 29 Feb 2012 17:26:43 GMT

Hello Cuno, we do offer S1SS/T1M in a 4pin, however it would have an MOQ of 5k since it is a non-standard size. 3 pin or 5 pin would be available w/o MOQ. I am only able to send you the link to the T1M drawing, the cable drawing is not available on line at this time. If you want to provide me with your email address i can send you the PDF for the S1SS assembly. http://www.samtec.com/documents/webfiles/cpdf/T1M-XX-XX-S-V-X-TR-MKT.pdf