Documents

AC-DC power supply range extended to 1kW for medical or industrial applications

nsowden — Tue, 09 Nov 2021 17:01:34 GMT

Current Revision posted to Documents by nsowden on 11/9/2021 5:01:34 PM

XP Power today announced additions to its SHP and MHP series of high power density fan cooled AC-DC power supplies. The SHP1000 and MHP1000 are highly efficient, typically 85%, have a power density of up to 8.9 Watts/cubic inch and can provide 1000 W across the full input range of 90-264 VAC. Models with an output of 24 VDC or greater are capable of providing up to 1200 W when used with an input of 180 VAC or greater. A range of 6 models provide the single outputs of +12, +15, +24, +28, + 36 or +48 VDC. The output is user adjustable within +/- 10% of nominal. A +5VDC, 1A always on output is also provided for standby purposes.

The MHP1000 range meets the UL/IEC60601-1 safety specification for medical equipment as well as EN55022/EN55011 EMC limits of Class B for conducted emissions and Class A for radiated. The SHP1000 range compiles with the UL/IEC60950-1 standards for ITE equipment, meets SEMI F47 requirements and EN55022 EMC limits for Class B conducted and Class A radiated.

These compact units, measuring just 242.6 x 149.8 x 61.0 mm (9.55 x 5.90 x 2.40 inches), can deliver full output power from -20 to +50 degrees C and with derating up to +70 degrees C. The units are capable of start up from as low as -40 degrees C. Both the SHP and MHP employ a variable speed fan for noise reduction.

Available control signals include AC OK and remote on/off. An active single wire current share capability is also provided to allow sharing of loads across multiple units or for configuration of redundant systems, remote sense is also provided.

Attachments:

community.element14.com/.../SF_5F00_MHP.pdf	SF_MHP.pdf
community.element14.com/.../SF_5F00_SHP.pdf	SF_SHP.pdf

Tags: Tech First Kits, industrial, chassis, 1000_watt, ac_dc, medical

Compact industrial and medical 400 W power supply provides 600 W peak within 6” x 4” footprint

nsowden — Tue, 09 Nov 2021 16:55:40 GMT

Current Revision posted to Documents by nsowden on 11/9/2021 4:55:40 PM

Compact industrial and medical 400 W power supply provides 600 W peak within 6” x 4” footprint

XP Power today announced the FCM400 series of single output high efficiency 400 W AC-DC power supplies suitable for a wide range of industrial and medical applications. Having an enclosed low noise fan and measuring just 152.4 x 101.6 x 49.0 mm (6 x 4 x 1.93 inches), the compact units have a power density of 13.9 Watts per cubic inch and a typical efficiency rating of 85%. It is believed that the FCM400 has one of the highest power densities of any 400 W power supply with medical safety approvals.

The FCM400 series can provide a higher peak power capability, up to 600 W for 0.5 seconds. This is important for applications that might draw a higher current for a short period, and enables the customer to specify the unit in place of a larger higher rated unit, therefore saving space and cost. Medical applications that might demand a high peak power include respiratory appliances, surgical equipment and hospital beds.

Accommodating the wide input range of 80 – 275 VAC, the family comprises 6 models with nominal outputs of +12, +15, +24, +28, +36, or +48 VDC. An output trim allows an adjustment of +/- 10% to suit non-standard voltage requirements and compensate for any voltage drops in the end system.

The series meets the electrical safety standards of both IEC 60601-1 / UL 60601-1 for medical equipment and IEC 60950-1 / UL 60950-1 for industrial and IT equipment. The series also complies with EN 55022 / EN55011 specifications for Class B conducted and Class A radiated emissions without the need of additional filtering components.

A +5 VDC 0.5 A always on standby output provides a supply for logic and memory functions without the need to design-in an additional voltage source. Remote on/off, AC OK and power fail signals provide basic monitor and control functions when integrating into the end system.

A 3 year warranty is provided as standard.

The FCM series is available from stock from Farnell or direct from XP Power.

Attachments:

community.element14.com/.../SF_5F00_FCM400.pdf

SF_FCM400.pdf

Tags: chassis, 600_watt, Block Diagrams, power_supplies, press_release, 400_watt, ac_dc, medical

XP Power launches 6 Watt DC/DC converter in ultra compact SIP-8 package

nsowden — Tue, 09 Nov 2021 02:20:46 GMT

Current Revision posted to Documents by nsowden on 11/9/2021 2:20:46 AM

XP Power today announced the ITX series of 6 Watt DC/DC converters encapsulated in an industry standard SIP 8-pin package measuring just 21.85 x 11.1 x 9.2 mm (0.86 x 0.44 x 0.36 inches). Believed to be one of the highest power ratings available in a SIP format and delivering a power density of up to 46 Watts per cubic inch, the ITX series occupies much less board space than competing devices. The converter also is highly efficient, typically 86%, and meets the design requirements for modern energy efficient and space constrained applications. No forced air flow or additional heatsinking is required.

The single and dual regulated output ITX series comprises four 2:1 input voltage ranges of 4.5-9 VDC, 9-18 VDC, 18-36 VDC and 36-75 VDC. Single output models provide +3.3, +5, +12, +15 or +24 VDC and duals +/-5, +/- 12 or +/-15 VDC.

Standard input/output isolation is rated at 1.5 kVDC but a 3 kVDC isolation option is available to order by quoting model suffix –H. Another option (-R) provides a remote on/off input for external control of the converter such as for sequencing start up or automatic on/off switching.

The ITX series can be used in most environments and has an extended operating temperature range from -40 to +90 degrees C. Full output power can be delivered up to +65 degrees C without derating.

The ITX series is available from Farnell, Newark, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Tags: dc/dc, dual, xp, converter, encapsulated, single, and, power

Compact 500 Watt power supply fits 4” x 6” footprint for medical and industrial applications

Former Member — Fri, 08 Oct 2021 08:02:17 GMT

Current Revision posted to Documents by Former Member on 10/8/2021 8:02:17 AM

XP Power today announced the GSP500 series of highly efficient 500 Watt AC-DC power supplies. Occupying a compact 4 x 6 inch footprint these single output forced air cooled units can continuously deliver the full output power across the wide temperature range of – 40 to + 50 degrees C and up to +70 degrees C with derating. With its high efficiency design and an almost entirely flat efficiency curve over the whole load range the supply requires just 12 CFM of forced air cooling. The GSP500 can also provide an output power of up to 180 Watts with convection cooling only.

Measuring 101.6 x 152.4 x 42.4 mm (4.00 x 6.00 x 1.67 inches) and packaged in a U channel chassis mount format, the GSP500 series is available in three single output models providing the nominal outputs of +12, + 24 or + 48 VDC. A +12 VDC / 0.3 A fan output is also provided. An integral end-mounted fan option (-EF) is available to order. Incorporating two 3-speed fans, the fan speed is determined by a combination of internal ambient temperature, input voltage and output load, and ensures acoustic noise is always kept to a minimum. In addition, the unit is designed so the fans will shut down under all input conditions where the load is minimal. This approach helps prolong fan life and also suits medical applications where the end-equipment is located close to patients.

The series conforms to the ANSI/AAMI ES60601-1 medical 3rd edition safety standard and also complies with the internationally recognized IEC/UL/EN60950-1 safety standard for IT equipment. Protection features and control signals include power fail, inhibit, output good LED and remote sense. A +12 VDC fan supply is available on the U-channel version and a +5 VDC / 2 A always-on output is available to supply logic circuits. With convection cooling the standby output is still available and rated at 5 Watts.

The GSP500 has a peak power capability that can deliver up to 650 Watts for a maximum of 100 ms.

The GSP500 series is available from Newark, Farnell, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../DS_5F00_GSP500_5F00_031114.pdf

DS_GSP500_031114.pdf

Industry’s smallest encapsulated 60 Watt AC-DC supply available in pcb or chassis mount

nsowden — Fri, 08 Oct 2021 07:54:11 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:54:11 AM

XP Power today announced the ECE60 series of single output encapsulated 60 Watt AC-DC power supplies. Suiting applications that require a slim profile, a high power density and low no-load power consumption, the ECE60 is available in either PCB mount, chassis mounted with screw terminals, or in a DIN rail mount configuration. Believed to have the smallest footprint and the highest power density of any 60 Watt power supply in the industry, the PCB mounted model measures 91.4 x 38.1 x 28.0 mm (3.6 x 1.5 x 1.1 inches) and has a power density of >10 Watts per cubic inch.

The range comprises eight models providing all the popular nominal output voltages from + 3.3 to + 48 VDC. A peak load capability allows up to 130% of rated output power to be available for up to 30 seconds in order to accommodate a higher start up current when powering a motor for example. Using this approach allows an engineer to avoid having to specify a more expensive higher rated power supply just to provide for an occasional peak load requirement. Also, with its no load power consumption of less than < 0.3 Watt and an high efficiency up to 89% the ECE60 series also ensures that end products meet the criteria of “green” energy saving initiatives.

The ECE60 meets EMC specification EN55022 for class B conducted and radiated emissions without the need for any additional filtering components. The supply is able to operate in most environments over a wide range of temperature from – 25 to + 70 degrees C with no derating until + 50 degrees C.

With a Class II construction no Earth or Ground connection is required.

The ECE60 60 Watt power supply is the latest addition to the ECE series that already comprises 5, 10, 20 and 40 Watt models.

The ECE60 series is available from Newark, Farnell, element14, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../DS_5F00_ECE60_5F00_040814.pdf

DS_ECE60_040814.pdf

XP Power extends GCS series of open-frame AC-DC supplies up to 250 Watts

nsowden — Fri, 08 Oct 2021 07:52:51 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:52:51 AM

XP Power today announced the addition of a 250 Watt range to its GCS series of high efficiency single output AC-DC power supplies. Certified to both industrial and medical international safety standards, and comprising 150, 180, and now 250 Watt models, the GCS series is available in multiple mechanical formats. Ensuring the range is suitable for multiple applications, the GCS series is available in an industry standard 3 x 5 inch (127 x 76.2 mm) open frame package, an enclosed covered version, and top or end-mounted fan cover options.

The open frame format allows the GCS250 to deliver up to 180 Watts by convection cooling, and the full 250 Watts when provided with only a 7 CFM airflow or when using the optional fan mounted configurations. With both Class I and Class II input construction techniques used, designers can opt to use an input earth scheme or not. These highly efficient supplies, typically up to 93% efficiency, are available with outputs covering all the popular nominal voltages from +12 to +48 VDC. A secondary 12 VDC / 0.6 A fan supply is also a standard feature, with remote on/off being available as an option.

Suiting a wide range of application environments, the GCS250 can operate over the extended temperature range of – 40 to + 70 degrees C with no derating until +50 degrees C. The supplies operate from a wide input range of 85-264 VAC, with full power available from 90 VAC and higher.

No additional EMC filtering components are required since the GCS series meets Class B conducted and Class A radiated criteria as stipulated by the internationally recognized standards of EN55011 and EN55022. Also, the units comply with the 3rd edition medical safety standards EN60601-1, ANSI/AAMI ES60601-1, CSA22.2 No 60601-1, and the IT equipment safety standard UL/EN 60950-1.

Ideal for use in any ‘1U’ equipment, the GCS250 is suitable for a multitude of applications within the industrial and healthcare markets.

The GCS250 series is available from Newark, Farnell, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Technical Data - GCS250

Tags: ac-dc, 250, output, w, single, high, efficiency

Ultra compact 15 Watt AC-DC power supply targets medical applications

nsowden — Fri, 08 Oct 2021 07:52:22 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:52:22 AM

XP Power today announced the EML15 series of 15 Watt single output AC-DC power supplies suitable for use in medical equipment. Complying with 3rd edition EN60601-1, ES60601-1, CSA-C22.2 No. 60601-1, IEC60601-1 medical safety standards, this extremely compact power supply is believed to be the smallest device at this power rating available in the industry. The supply provides two means of patient protection (MOPP) between primary and secondary. Measuring just 62.0 x 30.7 x 24.4 mm (2.44 x 1.21 x 0.95 inches) for the open-frame pcb mount version, the EML15 occupies very little board space and also offers a very high power density for this type of supply of 5.3 Watts per cubic inch. With its Class II construction no earth connection is required, this being ideal where a reliable ground connection may not be available.

Eight single output models are available in the common nominal output voltages from +3.3 to + 48 VDC. A peak load capability allows the EML15 to provide 130% of rated output power in order to accommodate short-term high power loads. This approach allows designers to avoid having to specify a higher rated power supply and saves both extra cost and board space.

In addition to an open frame PCB mounting format other optional mounting packages are available, these include open frame chassis mount with connectors, and encapsulated models with either PCB mounting or screw terminals. A DIN rail mounting clip is also available for use with the encapsulated screw terminal package option.

The EML15 series is convection cooled and able to operate in most environments with a wide temperature range of – 25 degrees C to +70 degrees C. Derating is applied above +50 degrees C. No forced air flow or additional heat sinking is required.

The series meets the limits for Class B conducted and radiated EMC specifications of EN55022 without the need for any additional external filtering components.

The EML15 is available from Farnell, Newark & element14, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../DS_5F00_EML15_5F00_270514.pdf

DS_EML15_270514.pdf

Chassis mount supply provides programmable voltage and current down to zero

nsowden — Fri, 08 Oct 2021 07:51:57 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:51:57 AM

XP Power today announced the HDS3000 series of 3000 Watt programmable AC/DC power supplies. The series compliments the existing 800 Watt and 1500 Watt versions and comprises seven single output models providing all the popular nominal output voltages from + 12 to + 60 VDC. These highly efficient supplies, up to 93%, allow the output voltage or output current to be programmed from 0 to 105% of nominal output by a variety of means. Digital communication can be made via I2C or RS232 serial interfaces and analog controls include using a 0 to +5 VDC input voltage or by using an external resistor.

An output trim adjustment of +/- 5% of stated nominal via a potentiometer is also provided in order to compensate of wiring losses, or to accommodate a non-standard voltage requirement. An always-on standby output is also available and is user selectable between either 5 VDC / 0.5A or 9 VDC / 0.3A.

Despite its high output power, the HDS3000 has a high power density and is packaged in a chassis mount format measuring only 360.0 x 127.0 x 127.0 mm (14.7 x 5.0 x 5.0 inches) including the bus bar output connectors and the variable speed fan. Using a variable speed fan helps keep energy consumption to a minimum, reduces acoustic noise when operating at low load conditions, and extends the lifetime of the fan.

Signal and other control functions include Remote On/Off, AC OK, remote sense and overtemperature shutdown. Up to five supplies can be configured in parallel to provide a current share capability for increasing available power output or to build in redundancy into the end-system. A multicolour LED is used to indicate power supply operational status through a combination of colour and flashing or constant illumination.

With its universal input range of 90 – 264 VAC the HDS3000 is suitable for worldwide use. There is no derating until below 100 VAC. The supply complies with the internationally recognized UL/EN609501-1 safety standard for IT equipment and also meets Class A conducted and radiated EMI criteria as stipulated by EN55022.

The HDS3000 series is available from Newark, Farnell, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a 3 year warranty

Attachments:

community.element14.com/.../DS_5F00_HDS3000.pdf

DS_HDS3000.pdf

Tags: chassis, power_supply, ac_dc, mount, hds3000

XP Power extends range of low power AC input LED drivers

nsowden — Fri, 08 Oct 2021 07:51:31 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:51:31 AM

XP Power today announced additions to the DLE series of AC input LED drivers. Adding to the extensive range of 15 – 60 Watt LED drivers, the DLE25 & 35 series of AC input LED drivers incorporate universal input with active power factor correction in a two power stage design, eliminating flicker while providing a high efficiency solution. Designed as a class II isolation product, without the need for a safety earth, DLE series LED drivers are also approved as a class 2 limited power source, making them suitable for a wide range of LED applications. Dimmable constant current versions are available with the facility for PWM, voltage and resistance programming.

Packaged in an IP67-rated enclosure measuring 93.5 x 73.5 x 33.0 mm (3.68 x 2.89 x 1.29 inches), the drivers are protected against dust ingress and are waterproof to depths up to 1 metre making them suitable for use in almost any outdoor application. Typical operating efficiency is in the range of 78% to 83%.

Accommodating the extended universal input voltage range from 90 VAC up to 305 VAC the DLE series supports the 277 VAC system used in the United States.

The series complies with EN61347 and UL8750 safety approvals and to Class B conducted and radiated noise limits as specified by EN55015.

The DLE25/35 series is available from Farnell, Newark, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_DLE25_2D00_35.pdf

SF_DLE25-35.pdf

Tags: ac-dc, 25w, led_driver, 35w, power

Compact 1U convection cooled power supply achieves 400 Watts without fans

nsowden — Fri, 08 Oct 2021 07:50:46 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:50:46 AM

XP Power today announced the SDH400 series of single and dual output 400 Watt highly efficient convection cooled power supplies. These compact 1U profile chassis mount supplies, measuring 203.0 x 127.0 x 40.64 mm (8.0 x 5.0 x 1.6 inches) can deliver the full 400 Watt output without the need for any cooling fans or forced air flow. The single output models also have a peak power capability that allows them to deliver 700 Watts for up to 0.5 seconds. This feature is ideal for accommodating applications that have momentary high start-up currents such as that of a motor, but removes the need for a higher rated, larger and more costly power supply being specified. Efficiency is typically 88% for single output models and 85% for duals.

The SDH400 single output range comprises nine models providing all the popular nominal output voltages from +3 to +60 VDC. Three dual output models are also available that offer output combinations of +5/+12 VDC, +5/+24 VDC or +12/+24 VDC. A trim function allows the user adjustment of output voltage in the range +/-5% of stated nominal to make up for load losses or to cater for non-standard voltage requirements. Power OK signal, remote on/off control, short circuit and overvoltage protection features are included as standard.

The full convection rating is available from 90-264 VAC input and the series operates over a wide temperature range of 0 to + 70 degrees C with no derating until +50 degrees C, meaning the SDH400 series will suit most global industrial power requirements without the need for de-rating.

The series meets safety approvals standard UL/EN 60950-1 and also conforms with EN55022 class B standard for conducted and radiated emissions.

Optional Molex input and output connectors are available in place of the standard screw terminal blocks.

The SDH400 series is available from Farnell, Newark, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_SDH400.pdf

SF_SDH400.pdf

Tags: watt, profile, power_supply, 1u, 400, ac_dc, high, efficiency, power

Robust 650 W AC-DC supply complies with MIL-STD-810F and ANSI/ISA standard for demanding applications

nsowden — Fri, 08 Oct 2021 07:48:58 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:48:58 AM

XP Power today announced the HHP650 series of fan-cooled rugged AC-DC power supplies designed for heavy-use industrial applications where a more robust unit is required. These single output 650 Watt units can accommodate the extended voltage input range from 85 – 305 VAC, and can deliver up to 780 Watt at high line input. In addition, the HHP650 has a peak power capability that provides up to 800 W at low line and 1000 W at high line for a maximum of 10 seconds.

Suitable for use in the most demanding of industrial environments, the HHP650 conforms to the shock and vibration specification of MIL-STD-810F, has immunity to voltage sag as stipulated by semiconductor manufacturing standard SEMI-F47 and can withstand a 6 kV surge as defined by IEEEStdC62.41. The units are also certified against the safety standard for industrial control equipment UL508, international safety standard UL/EN/IEC 60950, and the specification for equipment used in hazardous locations ANSI/ISA12.12.01-200 (previously UL1604). The power supplies also benefit from conformal coating. Operating temperature range suits most industrial environments and is from -40 degrees to +70 degrees C, with no derating until +50 degrees C.

The compact high efficiency HHP650, typically 85% efficient, has an internal end mounted variable speed fan and measures 253.8 x 106.8 x 63.5 mm (10 x 4.2 x 2.5 inches).

The HHP650 series comprises six models providing the popular nominal output voltages from +12 to + 48 VDC. A trim function provides the adjustment of +/- 10% from stated nominal output in order to cater for non-standard voltage requirements. An auxiliary always on output of +5 V / 0.2A can be used to power logic and memory functions.

Protection and control signal features include DC OK, remote on/off, remote sense, overvoltage, short circuit and overtemperature.

Single wire current sharing can also be incorporated when addition output power is required, or to build in redundancy. A DC OK volt free relay is also included.

The HHP650 is available from Farnell, Newark, element14, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../XPE0175_2D00_LF_5F00_HHP650_5F00_240214.pdf

XPE0175-LF_HHP650_240214.pdf

Tags: power_supply, ac_dc

Dual output 350 Watt AC-DC PSU suits patient contact (BF) medical and industrial applications

nsowden — Fri, 08 Oct 2021 07:48:02 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:48:02 AM

XP Power today announced the dual output EMH350 series of 350 Watt AC-DC power supplies aimed at a broad range of applications that require a dual output supply in an industry standard 4 x 6 inch footprint. These highly efficient units, typically 87% efficient, provide two outputs rated up to 200 Watts each with a combined maximum output of 350 W.

The series comprises five different models with a combination of six different output voltages from 12 to 60 VDC. Outputs are also capable of being connected in series in order to provide a single output up to 120 VDC. All models include an additional 12 V / 0.6 A fan output and a 5 V / 2 A standby output. Signal and control functions include AC OK/power fail, inhibit, current share and remote sense.

Two mechanical versions of the EMH350 are available. A ‘U’ channel format measuring 101.6 x 152.4 x 39.8 mm (4.00 x 6.00 x 1.57 inches) is available without a fan, or the end-fan option that integrates a variable speed fan and adds 25.4 (1 inch) to the length and 4.7 mm (0.18 inches) to the height. When using the ‘U’ channel format external cooling of only 16 CFM is required. The operating temperature range is from 0 °C to +70 °C with no derating until +50 °C.

The EMH350 series complies with both the international recognized safety standard UL/EN/IEC 60950 for IT equipment and the 3rd edition medical safety standard ANSI/AAMI/EN/IEC 60601, including risk management. The medical approval covers body floating (BF) applications where the end equipment may be connected to the patient. The units meet EN55011/22 Level B for conducted emissions.

The EMH350 series is available from Farnell, Newark & element14, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_EMHDual_5F00_060214.pdf

SF_EMHDual_060214.pdf

Tags: industrial, dual, output, ac, supply, medical, dc, power

XP Power release low cost 6 Watt DC-DC converters in DIP-24 package

nsowden — Fri, 08 Oct 2021 07:46:51 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:46:51 AM

XP Power today announced the JCE06 and JTE06 series of low cost compact 6 Watt DC-DC converters aimed at a broad range of mobile communications, industrial and transportation applications. Constructed in a plastic industry standard 24-pin DIP through hole mounting package, and measuring 31.75 x 20.32 x 10.40 mm (1.25 x 0.80 x 0.40 inches), the single and dual output units achieve a power density of 15 Watts per cubic inch and an efficiency of up to 84%.

Single output models are available with +3.3, +5, +12, +15 or +24 VDC outputs. Duals provide +/-3.3, +/-5, +/-12, +/-15 or +/-24 VDC outputs. The JCE06 accommodates a wide 2:1 input range and the JTE06 series an ultra wide 4:1 input range. All models cover the popular nominal input voltages of +12, +24 or +48 VDC.

Input to output isolation is 1,500 VDC across the range. An optional 3,000 VDC isolation model is available to order quoting suffix –H. A metal case option is also available by adding –M suffix to the part code at the time of order.

The converters suit a wide range of operating environments in temperatures from -40 to + 100 degrees C. No additional forced airflow or heatsinking is required, saving valuable board space and extra cost.

An under voltage input protection feature shuts down the converter below a set voltage in order to prevent damage to the converter.

All models within both ranges meet EN55022 class A conducted EMC emissions without the need for any additional components.

The JCE06 and JTE06 series are available from Newark, Farnell & element14, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_JCE.pdf	SF_JCE.pdf
community.element14.com/.../SF_5F00_JTE.pdf	SF_JTE.pdf

Programmable 800 and 1500 Watt PSUs provides constant current output down to almost zero volts

nsowden — Fri, 08 Oct 2021 07:46:16 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:46:16 AM

XP Power today announced the HDS series of 800 and 1500 Watt highly efficient programmable AC-DC power supplies. With a typical efficiency of up to 93%, these single output low profile supplies measure 249.0 x 127.0 x 40.9 mm (9.80 x 5.00 x 1.61 inches) for the 800 Watt models and 280 x 127 x 63.5 mm (11.02 x 5.0 x 2.5 inches) for the 1500 Watt range and fit into an industry standard 1U or 2U profile. Two front mounted variable speed fans, included in the above dimensions, help conserve energy and keep noise to a minimum. The power density of these compact units is greater than 10 Watts per cubic inch.

Both the output voltage and output current are programmable from 0% through to 105% of stated nominal through a serial RS232 interface, I2C interface, a 0 to +5 VDC input or via an external potential divider. By programming the output current a true constant current output is achieved down to almost zero volts, this being significantly better than the industry norm which is typically only down to 20-40%.

The HDS series comprises seven models covering the popular nominal outputs from +12 to +60 VDC. The output voltage for both series can also be manually adjusted +/- 5% by a trim function in order to make up for line losses. Both ranges also provide a user selectable standby output of 5 VDC / 0.5 Amp or 9 VDC / 0.3 Amp when the AC input is present.

The units include a comprehensive set of signals and controls such as remote on/off, AC OK, remote sense, PWM switching and overtemperature shutdown. A multifunction LED indicates the power supply status and gives warning notifications through use of different colours and blinking rates. In addition, I2C serial data connections provide for bi-directional data transmission between the power supply and external monitoring / controlling equipment.

A current sharing function provides for parallel operation of up to five power units for applications that might require a higher output power or for redundancy purposes. This also allows for system scalability of any future increased power requirements. Accommodating the full universal input voltage range of 90 - 264 VAC, the HDS800/1500 is suitable for world-wide use. They have an extended operating temperature range from -10 degrees C to +70 degrees C (+60 degrees C for HDS1500) with no derating until +50 degrees C. The series is approved to the internationally recognised safety specification IEC 60950-1 for ITE, industrial and commercial equipment. The units also comply with EN55022 Class B specification for conducted and radiated EMI.

Typical applications for the HDS800/1500 include use in semiconductor manufacturing equipment, battery charging and automatic test equipment.

The HDS800/1500 is available from approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_HDS800.pdf	SF_HDS800.pdf
community.element14.com/.../SF_5F00_HDS1500.pdf	SF_HDS1500.pdf

95% efficient 200 W convection cooled power supplies extends lifetime and temperature range

nsowden — Fri, 08 Oct 2021 07:40:49 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 7:40:49 AM

XP Power today announced the CCB200 series of ultra efficient ''green'' 200 Watt single output AC-DC power supplies aimed at a broad range of medical and industrial applications. Suiting convection cooled applications that require a very high efficiency in an open frame design, the series has a typical efficiency of 94% and a maximum of 95%, with a flat efficiency curve across the entire operating load range above 20%. Compared to typical 200 Watt supplies, the CCB200, when delivering full power, generates 50% less dissipated heat, resulting in significantly lower component temperatures and therefore an increased product lifetime. The high efficiency has enabled the convection-cooled units to be packaged in an industry standard 76.2 x 127.0 x 36.32 mm (3.0 x 5.0 x 1.43 inches), usually used for forced-cooled power supplies of this rating. No load power consumption is less than 0.5 W.

The series conforms to the ANSI/AAMI ES60601-1 medical 3rd edition safety standard and has approval for use in body floating (BF) applications where a patient applied part is used without the need for a further isolation stage. The CCB200 also complies with the internationally recognized UL/EN609501-1 safety standard for IT equipment.

Due to the high efficiency the CCB200 can deliver the full 200 Watt continuous output power over an extended temperature range from -20 to +70 degrees C without any derating, and up to +85 degrees C with derating. The industry norm is typically + 50 degrees C before derating applies.

The technology employed in the CCB200 ensures the ultra high efficiency rating is achieved from 90 VAC input, unlike current products in the market that have lower efficiencies at low line and therefore have to specify derating. The full operating range of the CCB200 series is 80 - 300 VAC, with full power available from 90 - 264 VAC.

A total of 5 models are available providing the popular nominal outputs from + 12 to +48 VDC. A user trim function provides output voltage adjustment of -4 to + 5% of stated nominal in order to accommodate load losses.

Protection features and control signals include power fail signal, remote sense and remote on/off.

The CCB200 is available from approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_CCB200.pdf

SF_CCB200.pdf

Tags: ac-dc, high_efficiency, xp_power, power_supply, open_frame

Low profile high efficiency 180 Watt AC-DC PSU occupies a 46% smaller footprint than industry norm

nsowden — Fri, 08 Oct 2021 05:43:55 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 5:43:55 AM

XP Power today announced the ECP180 series of low profile high efficiency ''green power'' open frame 180 Watt AC-DC power supplies. The IT and medically approved units have an average active mode efficiency of 93% and a no load power consumption of less than 0.5 W. With these energy saving credentials the ECP180 produces less heat and assists designers of end-systems to meet current ''green'' energy efficiency standards. The highly efficient design also enables the units to provide a convection cooled rating of 120 Watt, with the full output power of 180 Watts needing only 10 CFM of forced airflow.

Occupying 46% less footprint than the industry standard 3 x 5 inch power supply, the ECP180 measures just 50.8 x 101.6 (2.0 x 4.0 inches), with the lowest profile in its class of only 25.4 mm (1.0 inch). With PFC and a universal wide input range of 85 to 264 VAC, the ECP180 is available in 6 output voltage models providing the popular nominal outputs of +12, +15, +24, +28, +36 or +48 VDC. A secondary 12 VDC / 0.5 A fan output is standard across the range.

Meeting the ITE safety specifications of UL/IEC/EN 60950-1 and the latest stringent 3rd edition medical safety standards ANSI/AAMI ES 60601-1 and IEC/EN60601-1, the ECP180 series is suitable for use in a wide range of information technology, industrial and medical equipment applications. The units also comply with the internationally recognised EMC standards EN55011 and EN55022 Class B specifications for conducted noise emissions.

The ECP180 accommodates an extended operating temperature range from -20 to + 70 degrees C, with no derating until +50 degrees C.

The ECP180 is available from approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_ECP180.pdf

SF_ECP180.pdf

Tags: footprint, power_supplies, press_release, profile, cooled, xp_power, power_supply, low, ac_dc, convection, open_frame, power

Multi format 180 Watt 93% efficient power supply from XP Power

nsowden — Fri, 08 Oct 2021 05:34:55 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 5:34:55 AM

XP Power today announced additions to its GCS series of single output high efficiency ''green'' AC-DC power supplies with both ITE and Medical safety approvals. Complementing the GCS150 150 Watt models, the GCS180 range extends the power output capability up to 180 Watts. All models in the range have a no load input power of less than 0.5W and a typical efficiency of 93%. The GCS180 series is available in multiple mechanical formats giving the designer several mounting configurations to choose from to suit the end application. Convection cooled formats, providing up to 150 Watt output, are in an industry standard 3 x 5 inch (127 x 76.2 mm) open frame package, an optional enclosed cover option is also available. The full 180 W output is available when a forced air flow of only 7 CFM is provided by the user or by using the optional top or end mounted fan formats.

Across the range, 5 single output models are available covering the popular nominal outputs of +12, +15, +24, +28 or +48 VDC. An additional 12 V / 0.6 A fan output is standard. Designers also have the choice of using an input earth connection or not due to the Class I and Class II input construction used. A remote on/off feature is available across the range by specifying the -R option.

The GCS180 series meets the Class B limits of EN55011 and EN55022 for conducted emissions and Class A limits for radiated emissions with no additional filtering components required.

Complying with the IT equipment safety specifications of UL/EN60950-1 and the current 3rd edition medical safety standards of EN60601-1, ES60601-1 and CSA22.22 No 60601-1 per cUL, the GCS180 series is suitable for a wide range of medical, industrial and communication applications. With a wide range of operating temperature, from - 40 to + 70 degrees C, the units can be used in most environments. There is no derating until above + 50 degrees C.

The GCS180 is available from Farnell, Newark, element14, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Technical Data: GCS-Series

Attachments:

community.element14.com/.../SF_5F00_GCS.pdf

SF_GCS.pdf

Tags: chassis, ac-dc, power_supplies, press_release, power_supply, open_frame, efficiency, power

Compact 400 Watt power supply capable of 700 Watt peak

nsowden — Fri, 08 Oct 2021 05:33:06 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 5:33:06 AM

XP Power today announced the SDL400 series of 400 Watt single and dual output AC-DC power supplies. These compact units, suitable for 1U applications, are available in four mechanical formats: U channel, U channel with cover (-C option), top fan cover (-F option) and end fan cover (-E option). All of the formats apart from the top fan mounted version are less than 39.9 mm (1.6 inches) high. A variable speed fan is used to reduce audible noise at lower load conditions and extend fan life in the –E and –F models. For applications without a fan or forced air flow, the units can operate with convection cooling up to 220 W for the single output models.

With a peak power output of up to 700 Watts for up 0.5 s, the SDL400 is ideal for applications that might have a higher power demand for short duration loads such as starting up a motor. This capability saves designers from having to specify a larger, more expensive power supply to satisfy this requirement.

Single output models are available with the popular nominal outputs between +12 and +48 VDC, as well as both a +54 and +60 VDC output variant. Dual output models have a +5 VDC output in combination with a +12, +24 or +48 VDC or a +12 / +24 VDC model. The output voltage V1 can be manually trimmed +/-5% with the dual’s V2 output tracking by the same percentage of adjustment.

The SDL400 series has an operating temperature range from 0 to +50 degrees C, and with derating up to +70 degrees C. Overvoltage, overload and short circuit protection are standard features. Additionally, all models have remote on/off, power good and fan fail signals. The units meet EN55022 class B conducted and radiated emissions. Safety agency approvals are per UL 60950-1, CSA 22.2 No. 60950-1 and EN 60950-1 standards.

A low leakage current option (500 µA) is available by adding –L to the part number.

The SDL400 is available from Farnell, element14, approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../XPE0166_2D00_SF_5F00_SDL400_5F00_070513.pdf

XPE0166-SF_SDL400_070513.pdf

Tags: sdl400, dual_output, press_release, low_leakage_current, 400_watt, single_output, xp_power, power_supply, compact_size

Active surge protection filter module complies with DEF STAN 61-5 issue 6 load dump requirement

nsowden — Fri, 08 Oct 2021 05:32:55 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 5:32:55 AM

Active surge protection filter module complies with DEF STAN 61-5 issue 6 load dump requirement

XP Power today announced the DSF226 filter and surge protection module specifically designed for use in 28 VDC input defence applications. The encapsulated metal cased unit is capable of delivering up to 200 Watt output and meets the DEF STAN 61-5 part 6 issue 6 load dump requirement. The module also meets the internationally recognised immunity and emission standards MIL-STD 1275A-D, DEF STAN 59-411 & MIL-STD 461C. Providing active surge protection, the unit allows for the full 200 W output to be supplied over the entire 15 – 33 VDC including accommodating transients down to 10 VDC for up to 1 s. The output tracks the input voltage and is clamped at < 36 VDC.

The DSF226 can operate from -46 degrees C to + 100 degrees C. A thermal warning output can be used to control the end-application or disable the filter output.

The filter is ideal for use in combination with XP Power’s MTC family of military-specification DC/DC converters, QSB and ICH series of power bricks. The DSF226 could also be combined with XP Power’s J series of 24V 4:1 input converters for multiple output COTS defence applications.

The DSF226 is available from approved regional distributors, or direct from XP Power and come with a 3 year warranty.

Attachments:

community.element14.com/.../SF_5F00_DSF226.pdf

SF_DSF226.pdf

Tags: dsf226, surge_protection, defence_application, defstan_61_5, xp_power, 200_watts, power

Power Supply Selector guide provides quick and easy method for specifying power supplies

nsowden — Fri, 08 Oct 2021 05:31:35 GMT

Current Revision posted to Documents by nsowden on 10/8/2021 5:31:35 AM

XP Power today launched the first edition of its new style short form product catalogue. The full colour 56 page Power Supply Selector guide uses an extremely informative yet visually pleasing method of presenting XP Power’s comprehensive line-up of AC-DC power supplies and DC-DC converters. Key specifications for each product range is provided in an easy to follow layout, and the task of initial range selection is simplified by the use of index pages containing thumbnail images of each series organized by type and output power rating. The complete range of XP Power’s portfolio is represented with AC-DC units covering the output range of 5 to 3000 Watts, and DC-DC converters from 0.25 to 600 Watts.

Recent product additions covered in the guide include, what is believed to be, the world's smallest 5 W and 10 W AC-DC encapsulated PCB mounted modules, open-frame power supplies with efficiencies up to 95%, and convection cooled power supplies providing up to 200 Watts output from an industry standard 3 x 5 inch package. Also detailed are power supplies having medical safety approvals, available in the range from 15 W to 2500 W. Another recent product development included in the guide are DC-DC converter ranges that can accommodate the extremely wide range of input voltages commonly encountered in rail transportation applications.

Throughout the guide a legend key is used to identify those products that have a medical safety standard version available and, for both component and external power supplies, those that meet the stringent energy efficiency standards for no-load power and efficiency. A section within the guide summarizes the main requirements of XP Power's Green Power specification, based around the Energy Efficiency Level V standard.

Introductory sections of the guide highlight XP Power's expertise in the healthcare, industrial and technology markets. The development of engineered power solutions are also detailed where applications cannot be fulfilled with a standard product or where integrated products are required. Using XP Engineering Services in this way can provide a fast, low risk, low development cost alternative to designing a specialist power supply from scratch.

The Power Supply Selector guide is available now and can be downloaded at www.xppower.com. A print copy can be requested online or by contacting a local XP Power office directly.

XP Power also provides power supply selection applications for the iPhone and Android-based devices. These are available from www.xppower.com.

Tags: android, dc-dc, catalogue, ac-dc, xp_power, power_supply, guide, electronic_guide