/products/raspberry-pi/b/blog/posts/picomkradapter---connect-arduino-mkr-shields-to-raspberry-pi-picoI was very excited when I heard about the new Raspberry Pi Pico ( Raspberry Pi Pico ) Overview I thought about all the projects I am going to built with it. But I needed to find a good starting point.There are already a lot of Arduino Shield...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/picomkradapter---connect-arduino-mkr-shields-to-raspberry-pi-picoFri, 12 Feb 2021 12:42:31 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a914f016-5492-414a-8eae-c6b248723b96wolfgangfriedrich1<p>Love the idea. I am a big fan of adapters like this. Did some shields that work on Uno and Feathers.</p><p>&nbsp;</p><p>An improvement might be to add resistor option to cross RX/TX and make the power rails directional with Schottky diodes and then be able to plug in a Pico and a MKR controller and have a multiprocessor system. </p><p>&nbsp;</p><p>I did not check, but do have RESET and RUN correct directions/polarities to not block the other part?</p><p>Oh, and silkscreen on the pins to label their function would be nice. Are the square pads GND? Nice detail.</p><p>&nbsp;</p><p>Good work,</p><p>- Wolfgang.</p><img src="https://community.element14.com/aggbug?PostID=10762&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">