/products/raspberry-pi/b/blog/posts/stream-spdif-inhopefully someone can point me in the right direction to complete my first audio project. The aim is to take an output from my LINN amp via SPDIF (primarily from my turntable) and connect this to the Cirrus Audio Card on the RASPI and stream th...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/stream-spdif-inMon, 25 Jul 2016 00:41:20 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b79b4504-145a-486d-b3e2-9feb603f5039e14 Contributor0<p>Why would you do this? You are trying to do something completely unnecessary and useless. Your Raspi can receive the input with the multi-room in linn kazoo. I mean, since your turntable is first connected to the linn it will digitize the entire analogue input. The rest is taken care off by openhome. Unless I understand your project incorrectly I really recommend you to go the multi-room route.</p><img src="https://community.element14.com/aggbug?PostID=1474&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">