/products/raspberry-pi/b/blog/posts/update-process-to-enable-to-full-512mb-ramHello - I thought it might be helpful to highlight the process of updating a SD card to take advantage of the full 512MB on the new Raspberry Pi (Rev 2.0). I am using an element14 pre-programmed SD card . It contains Raspbian &quot;Wheezy...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/update-process-to-enable-to-full-512mb-ramWed, 30 Jan 2013 14:04:19 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:514bc0b8-400c-4763-b207-5268724ef1fae14 Contributor1<p>Thanks @Drew Fustini for the great article!&nbsp; This worked just as you said.&nbsp; I was in contact with Element 14 because I thought they sent me the wrong version, and was about to get real pissed.&nbsp; Rocking the full 512MB now.&nbsp; Thanks again!</p><img src="https://community.element14.com/aggbug?PostID=15222&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/products/raspberry-pi/b/blog/posts/update-process-to-enable-to-full-512mb-ramSat, 17 Nov 2012 01:56:30 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:514bc0b8-400c-4763-b207-5268724ef1faHBrydon1<p>[This is Nov 16] I have a type B2 board with Debian Wheezy.&nbsp; It does not see more than 256MB, before or after doing the Debian version of the above sequence.&nbsp; Is there any info on when I might be able to use all 512MB with it?&nbsp; I&#39;d like to use the Oracle JDK so reverting to Raspbian Wheezy isn&#39;t a good choice for me.</p><img src="https://community.element14.com/aggbug?PostID=15222&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">