/products/raspberry-pi/b/blog/posts/the-xbmc-bundle-for-raspberry-pi-is-hereXBMC for Raspberry Pi is a low cost media centre with a quick set up and is now available from element14! The bundle comes with the following: Software-SD card, pre-installed with the Raspbmc software that brings XBMC to your Raspberry Pi&amp;...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/the-xbmc-bundle-for-raspberry-pi-is-hereThu, 18 Jul 2013 04:42:25 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:4a71ae39-0288-42f3-94a4-281e3f3eb09ee14 Contributor0<p>rasplex is so much better </p><img src="https://community.element14.com/aggbug?PostID=15965&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/products/raspberry-pi/b/blog/posts/the-xbmc-bundle-for-raspberry-pi-is-hereThu, 20 Jun 2013 06:51:13 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:4a71ae39-0288-42f3-94a4-281e3f3eb09ee14 Contributor0<p>I was just wondering how you deal with the issue of the SD card corrupting if there is a power failure when the device is writing to the OS on the SD card?</p><p> I have had several attempts at using the Raspbmc distro and found it not overly stable (although I haven&#39;t tried with the latest version) and instead used the openELEC distrobution which is very stable but can still corrupt the SD card. I use the SD card to direct the system to boot off an attached USB drive.</p><img src="https://community.element14.com/aggbug?PostID=15965&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">