/products/raspberry-pi/b/blog/posts/pi-case-mini-mod-for-low-profile-microsd-adapterI like to avoid peripherals and accessories of the Raspberry Pi sticking out too much, resulting in a cleaner look. One of those things &quot;bothering&quot; me, is the SD card. There are alternatives, such as the low profile microSD card adapte...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/pi-case-mini-mod-for-low-profile-microsd-adapterSat, 19 Apr 2014 16:53:47 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7829ffbd-f6bf-4be8-aae3-1a6fdf5d5f06e14 Contributor2<p>you could cut the plastic in half cause most sd plastic &#39;&#39;thingies&#39;&#39; are twice as big as the actual sd itself. (sorry for bad english)</p><img src="https://community.element14.com/aggbug?PostID=16662&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/products/raspberry-pi/b/blog/posts/pi-case-mini-mod-for-low-profile-microsd-adapterThu, 09 Jan 2014 00:55:42 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:7829ffbd-f6bf-4be8-aae3-1a6fdf5d5f06mcb11<p>The SD card is a major board extension, and its a shame it was placed where it is, or wasn&#39;t traded for a microSD.</p><p>&nbsp;</p><p>Using this adaptor gives it a lot more protection, so well done.</p><p>&nbsp;</p><p>&nbsp;</p><p>Mark</p><img src="https://community.element14.com/aggbug?PostID=16662&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">