/products/raspberry-pi/b/blog/posts/using-the-pirackThe PiRack comes on it&#39;s own in an anti static bag with a single sheet of instructions,there&#39;s no need for any more. The overall purpose of the PiRack is really simpleexpand the Raspberry Pi&#39;s single expansion slot and duplicate it ...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/using-the-pirackWed, 26 Mar 2014 10:15:28 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5ecdc0be-9aea-4437-ae17-1c621f59c1d9shabaz1<p>Using this board for prototyping and testing is a great idea.</p><p>So far I&#39;ve been just half-plugging in boards to SBCs to be able to get at the pins from the sides, but that method is flaky at best and the probes unclip by themselves regularly : ( There were headers and sockets with long pins (for wire-wrap) but they are not cheap. Also with this board, while prototyping the extra pins on the unused headers for 0V and supply would help too.</p><img src="https://community.element14.com/aggbug?PostID=17400&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">