/products/raspberry-pi/b/blog/posts/raspberry-pi-b-in-picturesMy Raspberry Pi B+ arrived yesterday so I thought I&#39;d take a few photos of both the B+ and the changes but also how existing boars do do not fit the B+ design! PI+ Full Frontal B+ Network (now with Blinkin&#39; Lights) and the al...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/b/blog/posts/raspberry-pi-b-in-picturesThu, 17 Jul 2014 00:36:21 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:8c22edea-849a-4d7b-8845-24adc0b3ee7cmcb11<p>So does anyone know what the two pin (unpopulated) connector labelled &#39;RUN&#39; is for.</p><p>(Its between the Display connector and ACT led at the edge of the board.)</p><p>&nbsp;</p><p>Also little mention of Class B certification now.</p><p>Given the concerns raised in earlier conversations it seems to have been overlooked.</p><p>&nbsp;</p><p>Mark</p><img src="https://community.element14.com/aggbug?PostID=18099&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/products/raspberry-pi/b/blog/posts/raspberry-pi-b-in-picturesWed, 16 Jul 2014 22:26:23 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:8c22edea-849a-4d7b-8845-24adc0b3ee7cshabaz1<p>I see the raspberry logo has been thickened up too, looks cleaner now. It&#39;s good to see that finally some details matter on this board! : )</p><p>One thing that would have been worth doing is little silkscreen markers at the 10-pin points on the board at the GPIO connector, like the BeagleBone Black has. It is very convenient to quickly know you&#39;re using the pin you intended :-)</p><img src="https://community.element14.com/aggbug?PostID=18099&AppID=86&AppType=Weblog&ContentType=0" width="1" height="1">