Wolfson Audio Card, how to configure audio passthrough.

Due to only having a single input on the amplifier, it would be an advantage if the Wolfson Audio Card could be configured to route audio from the Line In jack to the Line Out jack. Is this possible? If so, coulld you help me with a script to do it?

Parents

0 royleith over 9 years ago

I suggest you use my wolfmixer.

https://www.element14.com/community/message/141476/l/re-a-lot-of-playback-items#141476

You can make any connection you like between inputs, outputs and the Raspberry Pi using the pull-down gadgets under the level controls. The Raspi remembers what you set and so you don't have to re-run the mixer for each session.

It was written for the 'Cirrus' distribution, but I have an earlier version for the 'Wolfson' distribution, if you are still using it.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 royleith over 9 years ago

I suggest you use my wolfmixer.

https://www.element14.com/community/message/141476/l/re-a-lot-of-playback-items#141476

You can make any connection you like between inputs, outputs and the Raspberry Pi using the pull-down gadgets under the level controls. The Raspi remembers what you set and so you don't have to re-run the mixer for each session.

It was written for the 'Cirrus' distribution, but I have an earlier version for the 'Wolfson' distribution, if you are still using it.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data