/products/raspberry-pi/raspberrypi_projects/b/blog/posts/raspberry-pi-zero-temperature-data-logger-multiple-ds18b20-sensors-to-thingspeakI was using a project by Mike Davis ( A Raspberry Pi Data Logger for about $25 (Temperature Probe and ThingSpeak).. All is working fine for one sensor but I have 3 and am unable to figure out a loop to get it to upload all three. I can see all three en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/raspberrypi_projects/b/blog/posts/raspberry-pi-zero-temperature-data-logger-multiple-ds18b20-sensors-to-thingspeakFri, 18 Mar 2016 23:56:49 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:277e87ed-0ac1-488a-bab3-506fa2c00bb6e14 Contributor1<p>Ok, I know this wasn&#39;t the cleanest but all I could figure out for now. Hope it helps someone.</p><p>&nbsp;</p><p>I removed:</p><p>&nbsp;</p><p>while true: line</p><p>time.sleep line</p><p>&nbsp;</p><p>changed the field to match which field i was uploading to and save three versions of the script. I then just call each script from a cron job running every 10 minutes.</p><p>&nbsp;</p><p>whatever I know it sucks there is a much better way but I played with the script until I gave up and did it the cheap way. It&#39;s working now just sucks to have to do it that way.</p><p>&nbsp;</p><p>Dale</p><img src="https://community.element14.com/aggbug?PostID=1237&AppID=84&AppType=Weblog&ContentType=0" width="1" height="1">