Rpi - Audio over IP via OpenOB? Assistance please!/products/raspberry-pi/raspberrypi_projects/b/blog/posts/rpi---audio-over-ip-via-openob-assistance-pleaseI&#39;m looking at building an AoIP link using a pair of suitable Rpi&#39;s with Wolfson / Cirrus audio boards. Audio In/Out would be analog. The Ethernet link would be extended using Ubiquity wireless long range access point devices set up as a wireles...en-USTelligent Community 12RE: Rpi - Audio over IP via OpenOB? Assistance please!https://community.element14.com/products/raspberry-pi/raspberrypi_projects/b/blog/posts/rpi---audio-over-ip-via-openob-assistance-pleaseThu, 08 Jun 2017 17:10:59 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:cb41dead-2897-423e-be7a-1fa2486fb77ebkortleven0<p>Hey guys,</p><p>&nbsp;</p><p>A while ago, I was able to install and use the OpenOB on a RPi without any issue, using an older RPi 1 board and the good old Wolfson addon audio board. Problem was that the RPi 1 isn&#39;t fast enough for high quality low-latency audio links, but the system does work as it should. I went with embedded mini PC&#39;s, Atom-based CPU&#39;s and a 16GB SSD...</p><p>&nbsp;</p><p>If there is anything I can help with, please specify where you are stuck, and I can check if I can assist in any way?</p><img src="https://community.element14.com/aggbug?PostID=2523&AppID=84&AppType=Weblog&ContentType=0" width="1" height="1">RE: Rpi - Audio over IP via OpenOB? Assistance please!https://community.element14.com/products/raspberry-pi/raspberrypi_projects/b/blog/posts/rpi---audio-over-ip-via-openob-assistance-pleaseSat, 11 Mar 2017 23:52:18 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:cb41dead-2897-423e-be7a-1fa2486fb77ekylelmartin0<p>I&#39;m trying to do the very same thing.</p><p>Some people on this thread appear to have had some luck - <a class="jive-link-message-small" href="https://www.element14.com/community/message/196123/l/anyone-any-experience-of-installing-openob-on-rpi#196123">Anyone any experience of installing OpenOB on RPi?</a> </p><p>If you have any progress on this would you please post here.</p><p>I&#39;m trying to set up a private pipeline for high quality audio to serve as a radio station STL.</p><p>&nbsp;</p><p>Thanks</p><img src="https://community.element14.com/aggbug?PostID=2523&AppID=84&AppType=Weblog&ContentType=0" width="1" height="1">