/products/raspberry-pi/raspberrypi_projects/b/blog/posts/project-raspberry-pi-washer-dryer-text-alert-system---iot-retrofit-appliancesSee my wireless motion detection system after this link , it&#39;s pretty awesome! Or, carry on... Disclaimer: I’m an engineer, not a pro film maker. Be advised. www.youtube.com/watch Disclaimer: I’m an engineer, not a pro film maker. Be advised.&amp;n...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/raspberrypi_projects/b/blog/posts/project-raspberry-pi-washer-dryer-text-alert-system---iot-retrofit-appliancesWed, 02 May 2018 18:35:43 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:4b200e49-b62d-4e7e-8ce6-3231f020b437chrisphurrough1<p>Hello,</p><p>I just found you wonderful article and would like to make a build of my own. However, I have a different sensor that you do and I&#39;m not sure how I would adapt your code to reflect the differences. I have the Qunqi SW-420 Motion Sensor Module that has only three connections versus the four connections you have. I&#39;m using a Raspberry Pi Zero and my pinouts are:</p><p>Pin 2 = VCC</p><p>Pin 4 = Ground</p><p>Pin 17 = Digital Out</p><p>Can you advise on how I would adapt your code to work with this sensor?</p><p>Many thanks,</p><p>Chris</p><span class="a-size-large"> </span><img src="https://community.element14.com/aggbug?PostID=3481&AppID=84&AppType=Weblog&ContentType=0" width="1" height="1">