/products/raspberry-pi/raspberrypi_projects/b/blog/posts/wrap-it-up-sort-of-finishing-the-foginator-2000Last time I had determined that the long ribbon cable was too long to fit into the box. So, I ordered a GPIO header with longer pins for the sense hat and a smaller ribbon cable with a 40 pin connector on one end and a 26 pin header on the othe...en-USTelligent Community 12https://community.element14.com/products/raspberry-pi/raspberrypi_projects/b/blog/posts/wrap-it-up-sort-of-finishing-the-foginator-2000Mon, 16 Nov 2015 19:54:58 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:19c54312-022c-4dd9-b2b6-3ba9e8a817a5DAB0<p>Did you terminate the flat cable?</p><p>&nbsp;</p><p>Those long leads tend to become antennas for high frequency.</p><p>&nbsp;</p><p>Otherwise, a great update.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=788&AppID=84&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/products/raspberry-pi/raspberrypi_projects/b/blog/posts/wrap-it-up-sort-of-finishing-the-foginator-2000Mon, 16 Nov 2015 16:02:16 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:19c54312-022c-4dd9-b2b6-3ba9e8a817a5pettitda0<p>I contacted Jeff Garff (the creator of the PWM/Neopixel library) regarding the audio issue and he replied with the following: &quot;Unfortunately, audio conflicts with this library as they both use the hardware pwm, so you shouldn&#39;t use both at the same time.&nbsp; It&#39;s recommended to use a USB audio device if you want to do audio with led control.&nbsp; This is true for all pi variants.&quot;</p><img src="https://community.element14.com/aggbug?PostID=788&AppID=84&AppType=Weblog&ContentType=0" width="1" height="1">