Actions
Engagement
  • Author Author: pchan
  • Date Created: Date Created
  • Last Updated Last Updated:
  • Views 1773 views
  • Likes 4 likes
  • Comments 1 comment
Related
Recommended

Pi-BLOX Enclosure for the Raspberry Pi (Compatible with Pi 3 Model B, Pi 2 Model B and Pi 1 Model B+)

image

imageimage

Operations Manual image Other Pi Accessories image

Technical Specification:

image  Designed to house the Raspberry Pi 3, Pi 2 & B+

image  Studs allow for construction blocks to be fitted directly to the enclosure

image  All cut-outs are pre-cut into the case

image  I/O Connector can be accessed through a slot in the side of the enclosure

image  Internal Mount points for Pi Camera

image  Camera lens and flash holes included

image  Gloss Finish

image  Size : (L) 88.8mm × (W) 64.5mm × (H) 30.5mm

image  Material : ABS

image

5 Colors Available

imageBuy NowBuy Now
imageBuy NowBuy Now
imageBuy NowBuy Now
imageBuy NowBuy Now
imageBuy NowBuy Now

  • The Pi-Blox slot opening for the camera cable is not spaced correctly. You will damage the camera cable by just inserting it and closing the enclosure. YOU MUST MODIFY the Pi-Blox by cutting the slot to extend towards the near edge by a few mm to work.

     

    Sorry Farnell/Element14 your designers got this part wrong, (MultiComp is Farnell).