Roadtest Review for the Genuino 101

RE: Roadtest Review for the Genuino 101

balearicdynamics — Sun, 15 Jan 2017 19:26:48 GMT

I found this review useful and very well done. Despite what can be usually supposed, that this board is just a sort of advanced Arduino I appreciated your good information also on the hardware, manufacture, usage difficulties and so on. Good in-depth exploration.

Enrico

RE: Roadtest Review for the Genuino 101

Jan Cumps — Sun, 15 Jan 2017 19:18:42 GMT

The image betwen these two lines of text is not showing (for me):

Here is another shot of the header alignment being off.

On the bottom side, I see a lot of leftover gunk on this board. I assume that most of these is not super hazardous material, but the board arrives quite frankly filthy.

RE: Roadtest Review for the Genuino 101

DAB — Sun, 15 Jan 2017 19:03:33 GMT

Nice review and good detail.

Thanks

DAB

RE: Roadtest Review for the Genuino 101

mcb1 — Sun, 15 Jan 2017 18:55:38 GMT

Nice review.

I hadn't tried the accelerometer, so it might be a something for a quite night or a rainy day.

The 'gunk' is poor flux removal. I've also seen it turn white with the ambient moisture.

You're quite right, it should be something that is addressed during mnaufacture, and the customer should be receiving a clean shiny product.

I also looked forward to the stickers, but did only use it for the container the others were stored in.

Mark

edit ... minor spelling mstake