AI to the Edge - Part 3 : AI Studio

RE: AI to the Edge - Part 3 : AI Studio

dubbie — Wed, 17 Apr 2019 13:17:19 GMT

Fabio,

I very comprehensive overview and demonstration.

It is difficult to fully demonstration the full AI potential in a simple demonstration such as this as it is difficult to achieve the slow aging effect. I was in the same factory as a student when predictive maintenance (before AI) was being introduced for a pick and place machine for flow soldering PCBs. They were aiming to run the system for six months to see if it could detect anything. Up until that time they were using preventative maintenance to try to keep the machine running for as long as possible. They wanted to use predictive maintenance to see if they could increase the period between the preventative maintenance actions as the machine would be out of action for days at a time. Being a student at the time I was only there for a placement and never found out if it worked.

Dubbie

RE: AI to the Edge - Part 3 : AI Studio

fmilburn — Tue, 16 Apr 2019 23:23:41 GMT

Hi Fabio,

Very nice detail and description - gives me a good idea of where things are on “zero-coding” AI. I find this an interesting developing area.

Frank

RE: AI to the Edge - Part 3 : AI Studio

genebren — Tue, 16 Apr 2019 19:18:50 GMT

Very nice investigation and write up!

RE: AI to the Edge - Part 3 : AI Studio

DAB — Tue, 16 Apr 2019 18:17:46 GMT

Very good update.

DAB