RE: Avnet UltraZed-EV Starter Kit Road Test - Port PYNQv2.5 continued

paradise1022 — Fri, 25 Sep 2020 18:52:32 GMT

That resizefs should not be included again:

https://github.com/Xilinx/PYNQ/blob/image_v2.5/sdbuild/ubuntu/bionic/aarch64/config#L3

Not sure what the impact is if he add that in stage 4 again.

The device tree issue you have seen is because you did not have a stable BSP. For most of the Xilinx boards the BSPs are well maintained and tested; so it would be much easier if the ultrazed BSP could be provided to you directly so you don't have to try all the hacks.

Don't forget the pynq support forum [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-a9e5e960-2b0e-47e5-a0ba-c64330538d5b/contentimage_5F00_1.png:16:16]

RE: Avnet UltraZed-EV Starter Kit Road Test - Port PYNQv2.5 continued

Fred27 — Mon, 27 Jul 2020 07:37:05 GMT

I found it similarly difficult when I was trying to build a Pynq image for the Zybo Z7 so I could use the Pcam5C camera. I also gave up.