Tech First Kit-Atmel-ATAVRSB200-Battery-Dev Kit

tech2 — Sun, 27 May 2012 00:57:51 GMT

Current Revision posted to Documents by tech2 on 5/27/2012 12:57:51 AM

Overview
Kit Contents
Key Features
Ordering Information
Documents

Overview

The SB200 is a development platform for SB20x smart battery reference designs, which offers an easy way to start evaluation and hence development of smart battery applications using Atmel® AVR® microcontrollers. The SB200 is not in itself a reference design, but is intended to be used with e.g. SB201-1, which is a reference design that demonstrates implementation of a single cell smart battery (Li-Ion).

16340/CR123A battery cells can be inserted in the SB200 battery sockets, and a SB20x is inserted in the dedicated daughter board socket. This forms a “battery pack” with a given number of cells, safety protection and full battery capacity monitoring capabilities. Alternately other cell types can be soldered into the SB200. To simulate the use of the “battery pack” the SB200 features a Charger that can charge the battery pack, and a Constant Current Load that can simulate an application that draws power from the battery pack.

Kit Contents

The ATAVRSB200 Development Kit contains the hardware essentials you will need to use the ATAVRSB200. The items in the Development Kit and their use are as follows.

SB20X
SB200 Gateway(USB1287)

Key Features

Safe use of the SB200 and Li-Ion batteries
Examples of use:
Charging the batteries
Discharging the batteries
Reading values from SB201 smart battery
Shunt resistor calibration
Authentication
Data logging
Troubleshooting

Ordering Information

Products

Supplier	Part Number
Atmel	ATAVRSB200ATAVRSB200

Associated Products

Supplier	Description	Part Number
Atmel	Probe for ATAVRONE	ATAVRONE-PROBEATAVRONE-PROBE
Atmel	Cable, Probe for ATAVRONE	ATAVRONE-PROBECBLATAVRONE-PROBECBL
Atmel	PSU for AVRONE	AVRONE-PSUAVRONE-PSU
Atmel	Development Kit, Debug Tool	ATJTAGICE2ATJTAGICE2
Atmel	Test Board Kit, Combo	ATJTAGICE2 - JMS2206ATJTAGICE2 - JMS2206
Fairchild	UHS Universal Configurable 2-Input Logic Gate	NC7SZ57P6XNC7SZ57P6X
Atmel	8-Bit Microcontroller with 128k bytes of ISP Flash and USB Controller	AT90USB1287-16MUAT90USB1287-16MU

Similar Products

Supplier	Description	Support Device	Part Number
Microchip	MCP7382X Li-Ion Battery Charger Dev tool	MCP7382X	MCP7382XEVMCP7382XEV
Microchip	MCP7384X Li-Ion Battery Charger	MCP7384X	MCP7384XEVMCP7384XEV
Microchip	MCP7386X Li-Ion Battery Charger	MCP7386X	MCP7386XEVMCP7386XEV
TI	Li-Ion Battery Charger	BQ24150	BQ24150EVMBQ24150EVM
TI	BQ20Z90EVM-001BQ20Z90EVM-001 Evaluation Module for 2nd Generation Impedance Track(TM)	BQ20Z90	BQ20Z90EVM-001BQ20Z90EVM-001
TI	BQ20Z80EVM-001 Impedance Track(TM) Fuel Gauge For LiIon Battery Packs	BQ20Z80	BQ20Z90EVM-001BQ20Z90EVM-001

Document List

Data Sheet

Part Number	Description	Size
ATtiny861/V	8-bit Microcontroller with 8K Bytes In-System Programmable	300KB
ATmega16HVA	8-bit Microcontroller with 16K Bytes In-System Programmable Flash	332KB
AT90USB1287	8-Bit Microcontroller with 128k bytes of ISP Flash and USB Controller	4.57MB
NC7SZ57	TinyLogic UHS Universal Configurable 2-Input Logic Gates	168KB

Application Notes

File Name	Size
ATAVRSB201 User's guide	320KB
Firmware User's Guide for SB201-1 & SB201-2	376KB
On-The-Go (OTG) add-on to USB	164KB
Quick start guide for SB200	664KB
Runtime calibration and compensation of RC oscillators	100KB
Using the Deep Under-Voltage Recovery Mode (DUVR)	80KB

Hardware & Software

File Name	Size
Battery Management Devices	398KB

Tags: at:development_kit, ap:battery, sp:atmel, at:tech_first_kit