Tech First Kit-Luminary Micro-RDK-IDM-SBC-Embedded-EVK

tech2 — Sun, 27 Oct 2013 05:23:54 GMT

Current Revision posted to Documents by tech2 on 10/27/2013 5:23:54 AM

Overview
Kit Contents
Key Features
Ordering Information
Documents

Overview

The Luminary Micro Stellaris® 3.5-inch Landscape Single Board Computer Intelligent Display Reference Design Kit (RDK-IDM-SBC) offers a complete, open-tool graphical touch-screen user interface design solution for control, automation, and instrumentation applications. Based on the feature-rich Stellaris LM3S9B92 microcontroller featuring Ethernet, USB OTG/Host/Device, and CAN, the new intelligent display module featured in the kit (MDL-IDM-SBC) combines a complete 3.5-inch QVGA landscape-oriented touch-screen user interface with several serial, digital, and analog connectivity options for easy implementation as a Human Machine Interface (HMI) touch display panel in an embedded control device. Software development for the RDK-IDM-SBC is simplified by using Luminary Micro's comprehensive StellarisWare® Peripheral Driver Library, Graphics Library, and USB Library in conjunction with ARM development tools from ARM tools partners.

Kit Contents

The reference design ships with everything needed to quickly evaluate and easily customize the intelligent display module for your specific application, including

Stellaris® IDM-SBC board
MDL-ADA2MDL-ADA2 10-pin to 20-pin adapter
USB flash drive (128 MB)
24 V power supply with international plug-set
Ethernet cable
8 Ohm speaker
CD with tools, documentation and source code including: Quickstart Guide, User’s Manual, Software Reference Manual, Board Data Sheet, BOM, schematics, and Gerber files

Key Features

The RDK-IDM-SBC ships with the software-customizable MDL-IDM-L35 module. The MDL-IDM-L35 features the following:

Bright QVGA LCD touch-screen display
- 262K colors, 3.5" QVGA 320 x 240 pixels
- White LED backlight with resistive touch panel
Serial connectivity options
- USB 2.0 Host
- 10/100 Ethernet MAC and PHY
- 1 MBPS Controller Area Network (CAN)
- I2C Interface for external peripherals and sensors
- UART serial port with TTL signal levels
High performance and memory
- 32-bit ARM® Cortex™-M3 core
- 256 KB single-cycle Flash, 96 KB single-cycle SRAM, and 80 MHz operation
Versatile board-level memories
- 8 MB SDRAM connected by EPI
- 1 MB serial flash connected by SPI
- microSD card slot
- USB Host connector for external mass-storage devices
Power supply
- Wide input range 12-40 Vdc power supply with auxiliary 5 V power output
I2S mono Codec for high-quality audio with 0.8 W amplifier for external 8-Ohm speaker
Screw terminal block for I2C, CAN, and power connections
Compact 2.0" x 3.0" PCB footprint
Easy to customize
- Includes full source code, example applications,
- and design files
- Develop using tools supporting the IDM-SBC
- from Keil, IAR, Code Sourcery, and Code Red
- (using a Stellaris evaluation kit or preferred ARM
- Cortex-M3 debugger)
- Supported by Luminary Micro Graphics Library
- and StellarisWare™ Peripheral Driver Library
- Comes with factory-programmed quickstart
- game demo application
- Ethernet boot loader for firmware update

Ordering Information

Products

Supplier	Part Number
Luminary Micro	RDK-IDM-SBCRDK-IDM-SBC

Associated Products

Supplier

Description

Part Number

Luminary Micro

Microcontroller

LM3S9B92-IQC80-B1LM3S9B92-IQC80-B1

Luminary Micro

10-pin to 20-pin JTAG Adapter Module

MDL-ADA2MDL-ADA2

Similar Products

Supplier	Description	Support Device	Part Number
Luminary Micro	2.8" display with PoE open-tooled Reference Design Kit	LM3S6918-IQC50-A2LM3S6918-IQC50-A2	RDK-IDMRDK-IDM
Luminary Micro	3.5" landscape display Reference Design Kit	LM3S1958	RDK-IDM-L35RDK-IDM-L35

Document List

Data Sheet

Part Number	Description	Size
LM3S9B92	Microcontroller	11.1MB

Application Notes

File Name	Size
Programming the On-Chip Flash Memory in a Stellaris Microcontroller	94.6KB
Clocking options for Stellaris Family Microcontrollers	106KB
Adding 32KB of Serial SRAM to a Stellaris Microcontroller	109KB
Evaluating PeerSec Networks’ MatrixSSL on a Stellaris Microcontroller	364KB
Upgrading to Luminary Micro's Stellaris Microcontrollers from Microchip's PIC Microcontrollers	123KB
Implementing RS-232 Flow Control on a Stellaris® Microcontroller	86KB
Using Schematic Part Libraries and PCB Footprint Libraries for Stellaris® Microcontrollers	190KB
Using the Stellaris® Ethernet Controller with Micro IP (uIP)	72.1KB
Using the Stellaris® Ethernet Controller with Lightweight IP (lwIP)	71.3KB
Serial-to-Ethernet Converter for Stellaris Microcontrollers	100KB
Configuring the Stellaris® LM3S9B92, LM3S9792, LM3S9B95, and LM3S9B96 Microcontrollers with Pin Multiplexing	152KB

Hardware & Software

File Name	Size
Intelligent Display Module Single-Board Computer RDK User's Manual	456KB
Board Design Package for the RDK-IDM-SBC	744KB
Reference Design Kit CD for the RDK-IDM-SBC	91.4MB
RDK-IDM-SBC Firmware Development Package	28.1MB

Others Resources

File Name	Size
IDM-SBC RDK Quickstart	188KB

Tags: sp:luminary_micro, at:evaluation_kit, at:tech_first_kit, ap:embedded