Tech First Kit-Luminary Micro-EKT-LM3S1968-ARM-EVK

tech2 — Sun, 27 May 2012 00:57:27 GMT

Current Revision posted to Documents by tech2 on 5/27/2012 12:57:27 AM

Overview
Kit Contents
Key Features
Ordering Information
Documents

Overview

Stellaris LM3S1968-IQC50-A2LM3S1968-IQC50-A2 Evaluation Kits provide a compact and versatile evaluation platform for LM3S1000 Series Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.

Kit Contents

The EKT-LM3S1968 Evaluation Kit contains the hardware essentials you will need to use the Kit. The items in the Evaluation Kit and their use are as follows.

LM3S1968-IQC50-A2LM3S1968-IQC50-A2 evaluation board (EVB)
USB cable
20-pin JTAG/SWD target cable
CD containing:
- Complete documentation
- Evaluation version of the software tools
- Quickstart guide and source code
- StellarisWare® Peripheral Driver Library and example source code
- An evaluation version of one of the following:
- Keil™ RealView® Microcontroller Development Kit (MDK-ARM)
- IAR Embedded Workbench
- Code Sourcery GCC development tools
- Code Red Technologies development tools

Key Features

Stellaris LM3S1968-IQC50-A2LM3S1968-IQC50-A2 microcontroller
Simple setup; USB cable provides serial communication, debugging, and power
OLED graphics display
User LED, navigation switches, and select pushbuttons
8Ω magnetic speaker with class D amplifier
Internal 3 V battery and support for on-chip hibernation module
USB interface for debugging and power supply
Standard ARM® 20-pin JTAG debug connector with input and output modes
LM3S1968-IQC50-A2LM3S1968-IQC50-A2 I/O available on labeled break-out pads

Ordering Information

Products

Supplier	Part Number
Luminary Micro	EKT-LM3S1968EKT-LM3S1968

Associated Products

Supplier	Description	Part Number
Luminary Micro	Stellaris® LM3S1968-IQC50-A2LM3S1968-IQC50-A2 Microcontroller	LM3S1968-IQC50LM3S1968-IQC50
FTDI	FT2232D Dual USB UART/FIFO I.C.	FT2232D/TRFT2232D/TR
NS	Micropower, 300mA Ultra Low-Dropout CMOS Voltage Regulator	LP3981ILD-3.3LP3981ILD-3.3
Onsemi	1 kb Microwire Serial EEPROM	CAT93C46VI-GT3CAT93C46VI-GT3
Fairchild	High Efficiency Serial LED Driver and OLED Supply with 20V Integrated Switch	FAN5331SXFAN5331SX

Similar Products

Supplier	Description	Support Device	Part Number
Luminary Micro	EKC-LM3S1968..EKC-LM3S1968.. Evaluation Kit for CodeSourcery G++	LM3S1968-IQC50-A2LM3S1968-IQC50-A2	EKC-LM3S1968EKC-LM3S1968
Luminary Micro	EKT-LM3S1968 Evaluation Kit for IAR Embedded Workbench	LM3S1968-IQC50-A2LM3S1968-IQC50-A2	EKI-LM3S1968EKI-LM3S1968
Luminary Micro	EKK-LM3S1968..EKK-LM3S1968.. Evaluation Kit for Keil™ RealView®	LM3S1968-IQC50-A2LM3S1968-IQC50-A2	EKK- LM3S1968EKK- LM3S1968

Document List

Data Sheet

Part Number	Description	Size
LM3S1968-IQC50-A2LM3S1968-IQC50-A2	Stellaris® LM3S1968 Microcontroller	6.38MB
FT2232D	FT2232D Dual USB UART/FIFO I.C.	1.0MB
LP3981	Micropower, 300mA Ultra Low-Dropout CMOS Voltage Regulator	719KB
CAT93C46	1 kb Microwire Serial EEPROM	149KB
FAN5331SXFAN5331SX	High Efficiency Serial LED Driver and OLED Supply with 20V Integrated Switch	583KB

Application Notes

File Name	Size
AN01237 Programming the On-Chip Flash Memory in a Stellaris Microcontroller	95KB
AN01240 Clocking Options for Stellaris Family Microcontrollers	107KB
AN01241 Using a Stellaris Microcontroller as an IO Processor	138KB
AN01242 Using the Stellaris Serial Flash Loader	118KB
AN01243 Adding 32 KB of Serial SRAM to a Stellaris Microcontroller	110KB
AN01244 Evaluating PeerSec Networks’MatrixSSL on a Stellaris Microcontroller	365KB
AN01248 Using the Stellaris Boot Loader	88KB
AN01249 Upgrading to Luminary Micro’s Stellaris Microcontrollers from Microchip’s PIC Microcontrollers	124KB
AN01250 Migrating to the New Members of the Stellaris Family of Microcontrollers	206KB
AN01257 Flash Protection for Stellaris Microcontrollers	95KB
AN01260 Using the Stellaris Ethernet Controller with Micro IP (uIP)	73KB
AN01261 Using the Stellaris Ethernet Controller with Lightweight IP (lwIP)	72KB
AN01265 Optimizing Code Performance and Size for Stellaris Microcontrollers	174KB
AN01266 Serial-to-Ethernet Converter for Stellaris Microcontrollers	101KB
AN01267 Using Stellaris Microcontrollers Internal Flash Memory to Emulate EEPROM	92KB
AN01270 Software UART for Stellaris Microcontrollers	119KB
AN01271 USB Certification for Stellaris Microcontroller-based USB Peripherals and Embedded Host Systems	3.9MB
AN01273 Application Update Using the USB Device Firmware Upgrade Class	190KB

Hardware & Software

File Name	Size
LM3S1968 Evaluation Kit for Code Red Technologies CD	181MB
GUI and command line flash programmer	5.49MB
EK-LM3S1968 Firmware Development Package	7.13MB
FreeRTOS demo for EKT-LM3Sxxxx	825KB

Others Resources

File Name	Size
WP - The Future of the MCU Market	784KB
WP - An Introduction to the ARM Cortex-M3 Processor	346KB
WP - Motor Control Using a 32-bit Cortex-M3 MCU	493KB
WP - 32 BITS for a Buck	301KB
WP - Transitioning to Cortex-M3 based MCUs	476KB
WP - Moving_to_CortexM-3	514KB
Quickstart-Eval-Kit-CodeRed	623KB
LM3S1968 Evaluation Kit Readme First	139KB
ProductBrief_1968_EvalKit	82KB

Tags: ap:arm, sp:luminary_micro, at:evaluation_kit, at:tech_first_kit