Tech First Kit-Luminary Micro-EKI-LM3S8962-ARM-EVK

tech2 — Sun, 27 May 2012 00:57:26 GMT

Current Revision posted to Documents by tech2 on 5/27/2012 12:57:26 AM

Overview
Kit Contents
Key Features
Ordering Information
Documents

Overview

The Stellaris LM3S8962 Evaluation Kit provides a compact and versatile evaluation platform for Ethernet + CAN enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.

Kit Contents

The EKI-LM3S8962..EKI-LM3S8962.. Evaluation Kit contains the hardware essentials you will need to use the Kit. The items in the Evaluation Kit and their use are as follows.

LM3S8962 evaluation board (EVB)
LM3S2110-IQC25LM3S2110-IQC25 CAN device board
USB cable
20-pin JTAG/SWD target cable
10-pin CAN cable
CD containing:
- A supported version of one of the following:
- Keil™ RealView® Microcontroller Development Kit (MDK-ARM)
- IAR Embedded Workbench
- Code Sourcery GCC development tools
- Complete documentation
- Quickstart guide
- Quickstart source code
- Stellaris® Firmware Development Package with example source code
- Code Red Technologies development tools

Key Features

Stellaris LM3S8962 microcontroller with fully-integrated 10/100 embedded Ethernet controller
and CAN module
Simple setup; USB cable provides serial communication, debugging, and power
OLED graphics display with 128 x 96 pixel resolution
User LED, navigation switches, and select pushbuttons
Magnetic speaker
MicroSD card slot
USB interface for debugging and power supply
Standard ARM® 20-pin JTAG debug connector with input and output modes
LM3S8962 I/O available on labeled break-out pads
Standalone CAN device board using Stellaris LM3S2110-IQC25LM3S2110-IQC25 microcontroller

Ordering Information

Products

Supplier	Part Number
Luminary Micro	EKI-LM3S8962EKI-LM3S8962

Associated Products

Supplier	Description	Part Number
Luminary Micro	Stellaris® LM3S8962 Microcontroller	LM3S8962-IQC50LM3S8962-IQC50
TI	EMC OPTIMIZED CAN TRANSCEIVER	SN65HVD1050DSN65HVD1050D
FTDI	FT2232D Dual USB UART/FIFO I.C.	FT2232D/TRFT2232D/TR
NS	Low Dropout, Low IQ, 500mA CMOS Linear Regulator	LP8345CLD-3.3/NOPBLP8345CLD-3.3/NOPB
Onsemi	1 kb Microwire Serial EEPROM	CAT93C46VI-GT3CAT93C46VI-GT3
Fairchild	High Efficiency Serial LED Driver and OLED Supply with 20V Integrated Switch	FAN5331SXFAN5331SX

Similar Products

Supplier	Description	Support Device	Part Number
Luminary Micro	EKC-LM3S8962 Evaluation Kit for CodeSourcery G++	LM3S8962	EKC-LM3S8962EKC-LM3S8962
Luminary Micro	EKT-LM3S8962 Evaluation Kit for Code Red Technologies Red Suite	LM3S8962	EKT-LM3S8962EKT-LM3S8962
Luminary Micro	EKK-LM3S8962..EKK-LM3S8962.. Evaluation Kit for Keil™ RealView®	LM3S8962	EKK- LM3S8962EKK- LM3S8962

Document List

Data Sheet

Part Number	Description	Size
LM3S8962	Stellaris® LM3S8962 Microcontroller	7.22MB
LM3S2110-IQC25LM3S2110-IQC25	Stellaris® LM3S2110 Microcontroller	5.80MB
FT2232D	FT2232D Dual USB UART/FIFO I.C.	1.0MB
LP8345	Low Dropout, Low IQ, 500mA CMOS Linear Regulator	665KB
CAT93C46	1 kb Microwire Serial EEPROM	149KB
FAN5331SXFAN5331SX	High Efficiency Serial LED Driver and OLED Supply with 20V Integrated Switch	583KB
SN65HVD1050D.SN65HVD1050D.	EMC OPTIMIZED CAN TRANSCEIVER	598KB

Application Notes

File Name	Size
AN01237 Programming the On-Chip Flash Memory in a Stellaris Microcontroller	95KB
AN01240 Clocking Options for Stellaris Family Microcontrollers	107KB
AN01241 Using a Stellaris Microcontroller as an IO Processor	138KB
AN01242 Using the Stellaris Serial Flash Loader	118KB
AN01243 Adding 32 KB of Serial SRAM to a Stellaris Microcontroller	110KB
AN01244 Evaluating PeerSec Networks’MatrixSSL on a Stellaris Microcontroller	365KB
AN01248 Using the Stellaris Boot Loader	88KB
AN01249 Upgrading to Luminary Micro’s Stellaris Microcontrollers from Microchip’s PIC Microcontrollers	124KB
AN01250 Migrating to the New Members of the Stellaris Family of Microcontrollers	206KB
AN01257 Flash Protection for Stellaris Microcontrollers	95KB
AN01260 Using the Stellaris Ethernet Controller with Micro IP (uIP)	73KB
AN01261 Using the Stellaris Ethernet Controller with Lightweight IP (lwIP)	72KB
AN01265 Optimizing Code Performance and Size for Stellaris Microcontrollers	174KB
AN01266 Serial-to-Ethernet Converter for Stellaris Microcontrollers	101KB
AN01267 Using Stellaris Microcontrollers Internal Flash Memory to Emulate EEPROM	92KB
AN01270 Software UART for Stellaris Microcontrollers	119KB
AN01271 USB Certification for Stellaris Microcontroller-based USB Peripherals and Embedded Host Systems	3.9MB
AN01273 Application Update Using the USB Device Firmware Upgrade Class	190KB
AN01274 Configuring Stellaris Microcontrollers with Pin Multiplexing	153KB

Hardware & Software

File Name	Size
CMX_Eval_for_CortexM3-Ethernet_and_IAR_tools	4.07MB
embos_cm3_iar_trial_v340	2.03MB
FreeRTOS demo for LM3Sxxxx with GCC tools	831KB
NicheLite demo for EKx-LM3S8962	2.68MB
LM3S8962 Evaluation Kit for IAR CD	427MB
GUI and command line flash programmer	5.49MB
EK-LM3S8962 Firmware Development Package	14.5MB

Others Resources

File Name	Size
WP - The Future of the MCU Market	784KB
WP - An Introduction to the ARM Cortex-M3 Processor	346KB
WP - Motor Control Using a 32-bit Cortex-M3 MCU	493KB
WP - 32 BITS for a Buck	301KB
WP - Transitioning to Cortex-M3 based MCUs	476KB
WP - Moving_to_CortexM-3	514KB
Evaluation Kit Quickstart IAR Tools	328KB
LM3S8962 Evaluation Kit Readme First	164KB
ProductBrief_8962_EvalKit	82KB

Tags: ap:arm, sp:luminary_micro, at:evaluation_kit, at:tech_first_kit