Tech First Kit-Luminary Micro-EKT-LM3S6965-Ethernet-EVK

tech2 — Sun, 27 Oct 2013 05:23:57 GMT

Current Revision posted to Documents by tech2 on 10/27/2013 5:23:57 AM

Overview
Kit Contents
Key Features
Ordering Information
Documents

Overview

The Stellaris® LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. Ethernet Evaluation Kit is a compact and versatile evaluation platform for the Stellaris LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. ARM® Cortex™-M3-based microcontroller. The evaluation kit uses the LM3S6965microcontroller’s fully integrated 10/100 Ethernet controller to demonstrate an embedded web server.

The LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. evaluation board can be used as an evaluation platform or as a low-cost in-circuit debug interface (ICDI). In debug interface mode, the on-board microcontroller is bypassed, allowing connection of the debug signals to an external target. The kit is also compatible with high-performance external JTAG debuggers.

This evaluation kit enables quick evaluation, prototype development, and creation of application-specific designs for Ethernet networks. The kit also includes extensive source-code examples, allowing you to start building C-code applications quickly.

Kit Contents

The evaluation kit contains everything needed to develop and run applications for Stellaris microcontrollers including:

LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. evaluation board (EVB)
Retracting Ethernet cable, USB cable, and 20-pin JTAG/SWD cable
CD containing:
- Complete documentation
- Evaluation version of the software tools
- Quickstart guide and source code
- StellarisWare® Peripheral Driver Library and example source code
- An evaluation version of one of the following:
- Keil™ RealView® Microcontroller Development Kit (MDK-ARM)
- IAR Embedded Workbench
- Code Sourcery GCC development tools
- Code Red Technologies development tools

Key Features

The evaluation kit includes the following features:

Stellaris LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. microcontroller with fully-integrated 10/100 embedded Ethernet controller
controller
Simple setup; USB cable provides serial communication, debugging, and power
OLED graphics display
User LED, navigation switches, and select pushbuttons
Magnetic speaker
LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. I/O available on labeled break-out pads
Standard ARM® 20-pin JTAG debug connector with input and output modes
USB interface for debugging and power supply
MicroSD card slot

Ordering Information

Products

Supplier	Part Number
Luminary Micro	EKT-LM3S6965EKT-LM3S6965

Associated Products

Supplier	Description	Part Number
Luminary Micro	Stellaris LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. Microcontroller Industrial Temperature 100-pin LQFP	LM3S6965-IQC50-A2LM3S6965-IQC50-A2
FTDI	Dual USB UART/FIFO I.C.	FT2232D/TRFT2232D/TR
Fairchild	High Efficiency Serial LED Driver and OLED Supply with 20V Integrated Switch	FAN5331SXFAN5331SX
Lattice Semiconductor	3.3V/2.5V/1.8V In-System Programmable SuperFAST High Density PLDs	LC4032V-75TN48C LC4032V-75TN48C

Similar Products

Supplier	Description	Support Device	Part Number
Luminary Micro	Stellaris LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. Ethernet Evaluation Kit for Keil™ RealView® MDK-ARM (16 KB code-size limited)	LM3S6965-IQC50-A2.LM3S6965-IQC50-A2.	EKK-LM3S6965EKK-LM3S6965
Luminary Micro	Stellaris LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. Ethernet Evaluation Kit for IAR Systems Embedded Workbench® (32 KB codesize limited)	LM3S6965-IQC50-A2.LM3S6965-IQC50-A2.	EKI-LM3S6965EKI-LM3S6965
Luminary Micro	Stellaris LM3S6965-IQC50-A2.LM3S6965-IQC50-A2. Ethernet Evaluation Kit for CodeSourcery G++ GNU (30-day limited)	LM3S6965-IQC50-A2.LM3S6965-IQC50-A2.	EKC-LM3S6965EKC-LM3S6965

Document List

Data Sheet

Part Number	Description	Size
LM3S6965-IQC50-A2.LM3S6965-IQC50-A2.	LM3S6965 Microcontroller Datasheet	6.85MB
FT2232D/TR	Dual USB UART/FIFO I.C.	0.99MB
FAN5331SXFAN5331SX	High Efficiency Serial LED Driver and OLED Supply with 20V Integrated Switch	584KB
LC4032V-75TN48C	3.3V/2.5V/1.8V In-System Programmable SuperFAST High Density PLDs	364KB

Application Notes

File Name	Size
Programming the On-Chip Flash Memory in a Stellaris Microcontroller	94.6KB
ADC Oversampling Techniques	188KB
Clocking options for Stellaris Family Microcontrollers	106KB
Using a Stellaris Microcontroller as an I/O Processor	137KB
Adding 32KB of Serial SRAM to a Stellaris Microcontroller	109KB
Evaluating PeerSec Networks’ MatrixSSL on a Stellaris Microcontroller	364KB
Using the Stellaris Microcontroller Analog-to-Digital Converter	364KB
Upgrading to Luminary Micro's Stellaris Microcontrollers from Microchip's PIC Microcontrollers	181KB
Migrating to the New Members of the Stellaris® Family of Microcontrollers	205KB
Implementing RS-232 Flow Control on a Stellaris® Microcontroller	86.0KB
Using Schematic Part Libraries and PCB Footprint Libraries for Stellaris® Microcontroller	190KB
Flash Protection for Stellaris® Microcontroller	94.6KB
Using the Stellaris® Ethernet Controller with Micro IP (uIP)	157KB
Using the Stellaris® Ethernet Controller with Lightweight IP (lwIP)	152KB
Optimizing Code Performance and Size for Stellaris Microcontrollers	173KB
Serial-to-Ethernet Converter for Stellaris Microcontrollers	100KB
Using Stellaris Microcontrollers Internal Memory to Emulate EEPROM	91.4KB
Software UART for Stellaris® Microcontrollers	118KB
Using the IEC 60730 Standard for Safe and Reliable Operation of Stellaris® Microcontrollers	86.5KB

Hardware & Software

File Name	Size
LM3S6965 Evaluation Kit Readme First	319KB
Stellaris® LM3S2965 Evaluation Board and LM3S6965 Evaluation Board User’s Manual Documentation Addendum	29.3KB
LM3S6965 Evaluation Kit for Code Red Technologies CD	184KB
GUI and command line flash programmer	5.49MB
EK-LM3S6965 Firmware Development Package for Revision A boards	13.9MB
EK-LM3S6965 RevC Firmware Development Package	15.9MB

Tags: ap:ethernet, sp:luminary_micro, at:evaluation_kit, at:tech_first_kit