/technologies/fpga-group/b/blog/posts/ultra96-v2-dual-camera-design-for-2021-2Introduction This blog post provides details on how to build and execute the new 2021.2 design for the Ultra96-V2 development board with Dual-Camera Mezzanine. Design Overview The following block diagram illustrates the 2...en-USTelligent Community 12https://community.element14.com/technologies/fpga-group/b/blog/posts/ultra96-v2-dual-camera-design-for-2021-2Tue, 25 Apr 2023 11:18:04 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a8cdbca8-668b-47d0-8932-f88af990c0fanitsvnit0<p>Hi, I tried to implement this project, although i am able to generate all the files, I can&#39;t boot using SD Card. I followed all instructions to get necessary files generated for AR1335 Single design, but when i copy those files and boot from SD card, I get this error over serial port on Putty &quot;create_overlay: Failed to create overlay(err=22)&quot;.</p> <p>I searched internet for same/similar errors but no resolution, I have Onsemi daul cam mezzannine and one AR1335 camera, my laptop has Vitis &amp; Petalinux 2021.2 . I also tried to use the image shared by you in your blog, and face the same error.</p> <p>Any help would be appreciated.</p> <p>Thanks and regards</p> <p>Nitin</p><img src="https://community.element14.com/aggbug?PostID=23009&AppID=19&AppType=Weblog&ContentType=0" width="1" height="1">