RE: Exploring 7 Series MIG Part - 1

Lexou581 — Wed, 26 Oct 2022 14:48:44 GMT

Thank you for this tutorial, it helps !

I just have some trouble to run the final stage after having exporting the hardware. When I launch Vitis HLS (2022.1, running on Win10) I don't have the "File>New Application Project" nor I have access to templates...

All I can have is the option "Clone Examples" in the Vitis welcome page, which gives access to some tutorials, including memory interface ones, but nothing similar to this tutorial so it's a bit confusing (and frustrating as I can't end this tutorial ^^)

Any idea to make things work ? It seems that I don't use the same version of Vitis but it's the one that was installed with vivado 2022.1.

RE: Exploring 7 Series MIG Part - 1

saadtiwana_int — Mon, 04 Jul 2022 08:01:59 GMT

Thanks for sharing this excellent write up. Topics like these don't get covered often.

I want to ask what is the purpose of the Reference clock for the MIG, and what was the reason to connect it to 200Mhz clock.

Thanks,
Saad