/technologies/fpga-group/b/blog/posts/porting-pyqn-to-zc702In this project we will port the PYNQ framework to the ZC702 development board. Introduction The ZC702 is an official development board from Xilinx. This board sports a ZC7020 ZYNQ FPGA SoC. It comes with a number of peripherals including ...en-USTelligent Community 12https://community.element14.com/technologies/fpga-group/b/blog/posts/porting-pyqn-to-zc702Tue, 16 Jun 2020 13:44:55 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c18abd28-2ad5-4932-b738-3fb93d677c2aFred271<p>I read this with interest as I&#39;ve been struggling to build a PYNQ image for the Zybo-Z7 sp that I can use the Pcam5C over MIPI. The problem is that there&#39;s no 2019.1 bsp available for the Zybo Z7. I tried building one myself and can successfully build a Petalinux image. However when I tried to build a Pynq image from scratch it complains about the MIPI IP being protected.</p><p>&nbsp;</p><p>Your shortcut process sounds useful, but I must admit my petalinux experience is lacking and I&#39;ve no idea how to do step 5 (building a custom kernel). I can&#39;t see anything that looks likely in the petalinux_config popup. Is it something that&#39;s easy to explain?</p><img src="https://community.element14.com/aggbug?PostID=8533&AppID=19&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/technologies/fpga-group/b/blog/posts/porting-pyqn-to-zc702Tue, 18 Feb 2020 15:37:23 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c18abd28-2ad5-4932-b738-3fb93d677c2amayermakes1<p>Awesome writeup! i need to dabble itno fpga stuff, it is getting more accessible to noobies like me thanks to awesome people like you that share their findings and projects!</p><img src="https://community.element14.com/aggbug?PostID=8533&AppID=19&AppType=Weblog&ContentType=0" width="1" height="1">