Migrating Things V1 Gateway to Things Stack V3

RE: Migrating Things V1 Gateway to Things Stack V3

shabaz — Fri, 25 Feb 2022 00:58:55 GMT

Hi Ralph,

Great work.

I'm trying to figure out what could be the differences between what you done, and [mention:acaf6a9338de4eef8f6717d5561ed01d:e9ed411860ed4f2ba0265705b8793d05]scenario here:

/technologies/internet-of-things/f/forum/50721/success-connecting-to-arduino-cloud-ttn-with-mkr-wan-13x0-share-your-experience

Am I correct the differences are:

(1) You are using your own local gateway

(2) You directly configured in TTN, and not via Arduino Cloud

(3) You're using 915 MHz whereas Jan uses 868 MHz

Any other difference?

RE: Migrating Things V1 Gateway to Things Stack V3

skruglewicz — Thu, 24 Feb 2022 22:38:13 GMT

Thanks /members/ralphjy [mention:dc11ece8204f479e8dce2a47a33b20d3:e9ed411860ed4f2ba0265705b8793d05]

This is appreciated work for me. It is much appreciated.

. I also found the Arduino Create Agent very finicky for my 2 Arduino boards MKR 1300 and the 33 IoT. It keeps hanging and crashing and I need to run it afain. what a pain.

When I created the MKR thing on the Arduino cloud a 2nd time, it never created the Device account with the device configured or sent an email like the first time.I'm still not connected since I don't have a gateway., I'll keep trying though

Thanks

Steve K

RE: Migrating Things V1 Gateway to Things Stack V3

fmilburn — Thu, 24 Feb 2022 21:48:29 GMT

These are the kind of issues that drive me crazy as my expectation is that TTN and Arduino will be straight forward and easy to use. At least the initial setup and examples should be easily done. Like others, I’ve had no problem setting up MKR WAN boards and ESP LoRa Boards to talk to each other.