Arduino MKR WAN 1310 integration with The Things Network MQTT

RE: Arduino MKR WAN 1310 integration with The Things Network MQTT

Jan Cumps — Sun, 14 Jan 2024 11:11:51 GMT

Integration with Node-RED works:

The example above shows an LoRaWan uplink from the Arduino.

received by a gateway in the neighbourhood (mine [emoticon:c4563cd7d5574777a71c318021cbbcc8])
forwarded to TTN
within TTN, integrated with their MQTT service
on a Node-RED device here, I subscribed to uplink messages
the Node-RED debug node dumps the full payload (I used the JSON formatter, could have use a JSON query to only get my ledState)

And a downlink example:

TTN received the Node-RED message

... and at the next uplink, the Arduino received it too, and switched its LED on.

hopla:

RE: Arduino MKR WAN 1310 integration with The Things Network MQTT

DAB — Sat, 13 Jan 2024 20:15:55 GMT

Nice post Jan.

RE: Arduino MKR WAN 1310 integration with The Things Network MQTT

shabaz — Sat, 13 Jan 2024 19:47:03 GMT

Very useful info. And the great thing is that everything is standards-based, no inventing of protocols to implement a very useful IoT solution : ) And the solution is entirely compatible with off-the-shelf LoRaWAN sensors/actuators too.

RE: Arduino MKR WAN 1310 integration with The Things Network MQTT

Jan Cumps — Sat, 13 Jan 2024 18:41:31 GMT

For full TLS MQTT, I found this reference: https://support.milesight-iot.com/support/solutions/articles/73000514079-the-things-stack-v3-integration-via-basic-station

It has a link to the TTN certificate chain,